molecalculator

Moles & Molar Mass

Cubic Feet Volume Calculator: Formula & Examples

Calculator No. 01-7449 · Updated · Formula and assumptions shown below

Volume 3.00 ft³
Volume in cubic inches
5,184 in³
= Volume × 1728
Length
2 ft
Set in the form below
Width
1.5 ft
Set in the form below
You enter
Length (ft), Width (ft), Height (ft)
You get
Volume (ft³), Volume in cubic inches (in³)
Rounding
2 dp · 0 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This calculator works out the volume of a rectangular space in cubic feet (ft³). You enter the length, width, and height in either feet or inches, and it returns the volume in cubic feet. The result tells you how much space an object or room occupies, which is useful for shipping, storage, construction, and aquarium sizing.

Formula

The volume of a rectangular prism (box, room, tank) is the product of its three internal dimensions:

V = L × W × H

  • V = volume in cubic feet (ft³)
  • L = length in feet (ft)
  • W = width in feet (ft)
  • H = height in feet (ft)

If you measure in inches, convert each dimension to feet by dividing by 12 before multiplying. Alternatively, multiply the three inch measurements to get cubic inches, then divide by 1728 (12³) to get cubic feet.

Worked Example

Using the default values from the calculator: length = 2 ft, width = 1.5 ft, height = 1 ft.

  1. Multiply length × width: 2 × 1.5 = 3 ft² (this is the base area).
  2. Multiply by height: 3 × 1 = 3 ft³.
  3. The volume is 3.00 ft³.

To check in inches: 24 in × 18 in × 12 in = 5184 in³. Divide by 1728: 5184 / 1728 = 3 ft³. The calculator shows the same result.

Assumptions

  • The shape is a rectangular prism (all angles 90°).
  • Dimensions are internal measurements – for a container, the volume of the space inside, not the outer dimensions including wall thickness.
  • For irregular shapes, this formula gives an approximation only.

When to Use Cubic Feet

Cubic feet is the standard unit of volume in the US for many practical applications:

  • Shipping and freight: Carriers charge by dimensional weight (DIM weight), which uses cubic feet to estimate how much space a package occupies on a truck or plane.
  • Storage: Self-storage unit sizes (5×5, 10×10) are often quoted in square feet of floor area, but the cubic feet tells you how many boxes you can stack.
  • Refrigerators and freezers: Capacity is listed in cubic feet. A typical family refrigerator is 18–30 ft³.
  • Aquariums: Fish tanks are often rated in gallons, but the volume in cubic feet (1 ft³ = 7.48052 gallons) helps when calculating water weight (1 ft³ of water ≈ 62.4 lb).
  • Construction: Concrete is ordered by the cubic yard (27 ft³), so knowing the cubic feet of a slab helps estimate how much concrete to order.

How to Measure Correctly

To get an accurate volume, measure the inside dimensions for containers. For rooms, measure from wall to wall, excluding baseboards and trim. Use a tape measure and record each dimension to the nearest inch or fraction of an inch.

If you have a single measurement in inches and others in feet, convert everything to the same unit first. For example, a box that is 2 ft long, 18 in wide, and 12 in high:

  • Convert inches to feet: 18 in = 1.5 ft, 12 in = 1 ft.
  • Volume = 2 × 1.5 × 1 = 3 ft³.

Alternatively, convert feet to inches: 2 ft = 24 in, 18 in, 12 in → 24 × 18 × 12 = 5184 in³ → 5184 / 1728 = 3 ft³.

Common Mistakes and Misconceptions

Mixing units is the most frequent error. If you multiply feet by inches, you get a meaningless number. Always convert to one unit before multiplying.

Forgetting to divide by 1728 when starting in inches. Some people multiply the three inch dimensions and think they have cubic feet – that gives cubic inches, which is 1728 times larger.

Confusing cubic feet with square feet. Square feet is area (length × width), while cubic feet is volume (length × width × height). A 10×10 room has 100 ft² of floor area, but if the ceiling is 8 ft high, the volume is 800 ft³.

Using outer dimensions for a container. The volume of a box with 1-inch thick walls is less than the outer dimensions suggest. For shipping, carriers use the outer dimensions to calculate dimensional weight; for storage capacity, use the inner dimensions.

Converting to Other Units

Sometimes you need the volume in gallons, liters, or cubic yards. Here are the key conversion factors:

  • 1 ft³ = 1,728 in³
  • 1 ft³ = 7.48052 US gallons
  • 1 ft³ = 28.3168 liters
  • 1 yd³ = 27 ft³
  • 1 ft³ of water weighs ≈ 62.4 lb (at 4 °C, where water is densest)

For example, a 3 ft³ box holds 3 × 7.48052 ≈ 22.44 US gallons. If you’re filling it with water, that’s 22.44 × 8.34 lb ≈ 187 lb of water (plus the container weight).

Limitations of the Formula

This formula only works for rectangular prisms. For cylinders, spheres, cones, or irregularly shaped objects, you need different formulas. For example, a cylindrical tank’s volume is π × r² × h, where r is the radius and h is the height. If you’re measuring a bag of mulch or a pile of gravel, the shape is irregular and the volume is approximate – often measured by the cubic yard using a different method.

Also, for shipping, the actual billable weight may be the greater of actual weight or dimensional weight. Dimensional weight is calculated as (length × width × height in inches) / 139 for domestic US shipments (the divisor varies by carrier). So a light but large box may be charged by its cubic feet, not its weight.

Frequently Asked Questions

How many cubic feet is a 10×10 room? If the ceiling is 8 feet high, the volume is 10 × 10 × 8 = 800 ft³. The floor area is 100 ft², but the volume depends on the height.

How do I calculate cubic feet from inches? Measure length, width, and height in inches, multiply them together to get cubic inches, then divide by 1728 (12³). For example, 24 × 18 × 12 in = 5184 in³ ÷ 1728 = 3 ft³.

What is the difference between cubic feet and square feet? Square feet measures area (two dimensions), while cubic feet measures volume (three dimensions). A square foot is a flat surface; a cubic foot is a cube that is 1 ft on each side.

How many cubic feet are in a cubic yard? There are 27 cubic feet in a cubic yard (3 ft × 3 ft × 3 ft = 27 ft³). Concrete is often sold by the cubic yard, so divide your cubic feet by 27 to get cubic yards.

How much does a cubic foot of water weigh? At 4 °C (39.2 °F), pure water has a density of about 62.4 lb/ft³. So a cubic foot of water weighs approximately 62.4 pounds. This is useful for aquarium and pool weight calculations.

Can I use this calculator for a cylinder? No, this calculator is only for rectangular boxes. For a cylinder, use V = π × r² × h, where r is the radius and h is the height. For example, a cylinder with radius 1 ft and height 2 ft has volume π × 1² × 2 ≈ 6.28 ft³.

Related

Formula used
in l | Length | ft | 2 | 0
in w | Width | ft | 1.5 | 0
in h | Height | ft | 1 | 0
out v | Volume | ft³ | l * w * h | 2
out vin | Volume in cubic inches | in³ | v * 1728 | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →