Acetone has a density of about 0.79 g/mL at 20 °C; a commonly cited value is 0.791 g/mL. This calculator converts an entered acetone volume to mass, or an entered mass to volume, using that reference density.
Formula
Density is mass divided by volume: ρ = m / V. Rearranging gives m = ρ × V when calculating mass, and V = m / ρ when calculating volume. Here, ρ is the reference acetone density, 0.791 g/mL; m is mass in grams (g); and V is volume in millilitres (mL). The selector chooses which calculation to display. The calculator uses one reference density rather than adjusting for temperature or purity.
Worked Example
The defaults are a volume of 100 mL, a mass of 79.1 g, and volume-to-mass mode. Using ρ = 0.791 g/mL:
m = ρ × V = 0.791 g/mL × 100 mL = 79.10 g.
The displayed result, rounded to two decimal places, is 79.10 g. For mass-to-volume mode, use the default mass instead: V = 79.1 g ÷ 0.791 g/mL = 100.00 mL. The selector determines which result is shown.
Assumptions
- The liquid is treated as pure acetone, with density 0.791 g/mL, a representative value near 20 °C.
- The calculation assumes the reference density is suitable for the sample; it does not correct for temperature, dissolved material, or measurement uncertainty.
- This is a conversion between mass and volume, not a method for determining a sample’s actual density.
What Acetone’s Density Means
Density describes how much mass occupies a given volume. A density of 0.791 g/mL means that one millilitre of acetone has a mass of about 0.791 grams under the conditions associated with that value. Equivalently, one litre would have a mass of about 791 grams, because 1 L = 1,000 mL.
That figure is lower than water’s density near room temperature, which is close to 1.00 g/mL. Thus, for the same measured volume, acetone has less mass than water. This comparison is about mass per volume; it does not mean acetone is less hazardous or that the liquids can safely be treated alike.
Density is an intensive property: it does not increase just because a sample is larger. A 10 mL sample and a 100 mL sample have approximately the same density if both are the same substance at the same temperature and pressure. Their total masses differ in proportion to their volumes.
Why Temperature and Purity Matter
Liquid density usually changes with temperature. As a liquid warms, it commonly expands, so the same mass occupies a larger volume and its density falls. Cooling generally has the opposite effect. Therefore, a density quoted without a temperature is incomplete for precise work. Published reference values may differ slightly because they refer to different temperatures, measurement methods, or purity specifications.
Acetone is volatile: it evaporates readily at ordinary temperatures. Evaporation can change a sample’s mass and volume during handling, particularly if it is left open. Water or other contaminants can also alter the measured properties. For accurate work, use a density value specified for the relevant temperature and sample, or measure the sample using an appropriate validated method.
Pressure changes are usually less important than temperature changes for a liquid under ordinary laboratory conditions. Still, the calculator’s single value is an approximation, not a universal constant. It is most useful for everyday estimates and should not be presented as a high-precision result.
Using Density to Convert Mass and Volume
The relationship is straightforward as long as units match. With ρ in g/mL and V in mL, multiplying gives mass in grams: the millilitre units cancel. Dividing mass in grams by density in g/mL gives volume in mL.
- Volume to mass: 25 mL × 0.791 g/mL ≈ 19.8 g.
- Mass to volume: 50 g ÷ 0.791 g/mL ≈ 63.2 mL.
- Litres to mass: 0.5 L = 500 mL, so 500 mL × 0.791 g/mL ≈ 396 g.
These are estimates using the same reference density. Keep enough significant figures for the purpose, but do not imply a measurement is more precise than its input or the density value allows. For instance, measuring a volume to the nearest millilitre does not support reporting a result to many decimal places.
Common Unit and Measurement Mistakes
A frequent error is mixing millilitres with litres. If volume is entered in litres while density is in g/mL, convert litres to millilitres by multiplying by 1,000 first. Another common error is multiplying by density when the required operation is division: use multiplication to find mass from volume, and division to find volume from mass.
- Check that the density and volume units are compatible before calculating.
- Record the temperature when a precise density matters.
- Do not assume a container’s marked volume is an exact measurement of its contents.
- Keep acetone containers closed when not in use to limit evaporation and exposure.
Density is also not the same as concentration. Density concerns total mass per volume of a material; concentration describes how much of a particular substance is present in a mixture. A mixture containing acetone may have a different density from pure acetone, and its density alone does not identify its composition.
Safety and Practical Scope
Acetone is a highly flammable liquid, and its vapour can ignite. It can also irritate the eyes and may cause skin dryness with repeated contact. Keep it away from flames, sparks, hot surfaces, and other ignition sources; avoid breathing vapour and prevent eye or prolonged skin contact. Use suitable ventilation and protective equipment according to the product’s safety data sheet (SDS), workplace rules, and the task. Follow your lab method, the safety data sheet (SDS) and your supervisor.
Store acetone in a suitable, tightly closed container in a designated flammable-liquid storage area, following local requirements. Do not pour it down a drain or dispose of it with ordinary rubbish; follow the applicable hazardous-waste procedures. Density calculations do not replace safe handling, waste rules, or a measurement method appropriate to the work.
Frequently Asked Questions
Is acetone’s density exactly 0.791 g/mL?
Not under every condition. It is a representative value near 20 °C. Temperature, purity, and reference source affect the value, so use a specified density for precise calculations.
Is acetone denser than water?
No. Near room temperature, acetone’s density is about 0.791 g/mL, below water’s approximately 1.00 g/mL. For equal volumes, acetone therefore has less mass.
How much does 100 mL of acetone weigh?
Using 0.791 g/mL, 100 mL has an estimated mass of 79.1 g. The actual mass can vary with temperature and sample purity.
How many millilitres are in 100 grams of acetone?
At 0.791 g/mL, 100 g ÷ 0.791 g/mL is approximately 126.4 mL.
Does acetone density change with temperature?
Yes. Like most liquids, acetone generally expands as it warms, lowering its density. A temperature-specific reference or measurement is needed when that difference matters.
Related
Formula used
in v | Acetone volume | mL | 100 | 0 in m | Acetone mass | g | 79.1 | 0 sel mode | Calculate | Volume to mass=1, Mass to volume=2 out r | Calculated result | g or mL | (v * 0.791) * (mode = 1) + (m / 0.791) * (mode = 2) | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- MD Calc I:T Ratio Calculator and Explanation0.0500 ratio
- Oxygen Mass Number: Isotope Values Explained16 nucleons
- Mass-to-Light Ratio: Meaning and Calculation1.000 M☉/L☉
- M/z Ratio in Mass Spectrometry: Meaning and Calculation1,000.00 Th
- Mass Fraction to Molar Fraction Calculator
- K2 Molar Mass Calculator and Calculation78.1966 g/mol