“Comp B” is not a chemical formula with one universally applicable density. If you mean the military explosive composition, commonly written Composition B, reference sources report a density around 1.65 g/cm³ (about 1,650 kg/m³), but the precise value depends on the formulation, manufacturing, and measurement conditions. This page calculates density from mass and volume; it is for general scientific arithmetic, not for preparing or handling energetic materials.
Formula
Density is mass divided by volume: ρ = m / V. In the calculator, m is mass in grams (g), V is volume in cubic centimetres (cm³), and ρ is density in grams per cubic centimetre (g/cm³). The second result converts g/cm³ to kg/m³ by multiplying by 1,000; the two units express the same density on different scales.
The calculator’s first result is the density asked for. It does not identify an unknown substance or verify that a sample is Composition B. The values 165 g and 100 cm³ are convenient demonstration inputs, not a recommended sample size or a description of a real specimen.
Worked Example
Using the calculator’s default values:
- Mass: m = 165 g
- Volume: V = 100 cm³
- Density: ρ = 165 g / 100 cm³ = 1.6500 g/cm³
- Converted density: 1.6500 × 1,000 = 1,650 kg/m³
The displayed headline result is 1.6500 g/cm³. This arithmetic demonstrates the definition of density; it does not establish a certified or lot-specific density for any material.
What “Comp B” Can Mean
“Comp B” is ambiguous outside a clearly identified context. It may be shorthand for Composition B, an energetic material, but it can also be an internal label, product code, course term, or name used for a different compound. Density cannot be assigned reliably from an informal label alone. Before using a reference value, confirm the exact substance and the convention or specification that the source is discussing.
Composition B is a formulation rather than a pure compound with a single molecular formula. Public descriptions commonly identify it as a mixture based principally on RDX and TNT, with a wax or other formulation detail depending on the source and specification. As with mixtures generally, ingredient proportions, voids, temperature, processing, and the method used to determine volume can affect reported bulk density. A handbook figure is therefore a reference, not a guarantee for every sample.
This distinction also explains why “the density of Comp B” should not be treated like the density of a pure element or a simple liquid. A reported value may refer to a specified formulation or a particular measurement method. If the question concerns a real item, use its authorized documentation rather than inferring properties from a generic name.
Understanding the Reference Value
A value near 1.65 g/cm³ is often quoted for Composition B. In other units, that is about 1,650 kg/m³, or 1.65 g/mL. These are unit conversions, not separate measurements. Since one cubic centimetre equals one millilitre, the numerical value in g/cm³ and g/mL is identical.
Density is not the same as mass, volume, or weight. A density of 1.65 g/cm³ means that each cubic centimetre has a mass of about 1.65 g under the conditions and definition behind that figure. It does not mean every object made from the material has the same mass: object mass depends on its volume too. Nor does a reference density determine whether an object is safe, authentic, intact, or suitable for any use.
For bulk materials, another useful distinction is between material density and bulk density. Bulk density can include spaces between particles or within a packed bed; the density of a solid piece excludes such external packing gaps. A source that does not state which quantity it reports may not be comparable with another source.
How the Calculator Works
Enter a mass and the corresponding volume, using the units shown. The calculator divides mass by volume and reports density. It also gives the SI-form result in kg/m³, using the exact conversion 1 g/cm³ = 1,000 kg/m³. The inputs must describe the same sample and the same state; pairing the mass of one sample with the volume of another produces a meaningless result.
This calculation is most useful when you already have trustworthy mass and volume measurements and need their ratio. For a regular object, volume can sometimes be calculated from measured dimensions using the appropriate geometric formula. For irregular objects, volume measurement is method-dependent. This page does not prescribe a measurement procedure, especially for hazardous materials.
- Check that mass is entered in grams, not kilograms or milligrams.
- Check that volume is in cm³, not mL used with a different volume unit accidentally.
- Use measurements from the same sample and note the temperature if it matters to the source.
- Keep meaningful precision: extra digits in a calculator result cannot improve uncertain input measurements.
Limits, Safety, and Common Misconceptions
The calculator applies the basic mass-over-volume definition. It does not account for temperature expansion, pressure, porosity, composition differences, measurement uncertainty, or whether a stated volume is bulk or material volume. It also cannot determine a density from the name “Comp B” alone. Treat reference values as approximate unless a specific authoritative specification supplies conditions and tolerances.
Composition B is an energetic material. This article gives no instructions for manufacturing, modifying, testing, storing, or handling it. Do not use density arithmetic to identify, evaluate, or make decisions about an unknown object or substance. Leave suspected energetic material undisturbed and contact appropriate emergency or hazardous-material authorities. For ordinary laboratory work on nonhazardous samples, follow your lab method, the safety data sheet (SDS), and your supervisor.
A frequent misconception is that a density number is a definitive identifier. Many different materials can have similar densities, and the value for a mixture can vary with its condition and measurement definition. Density may help characterize a known sample, but it is not a safe or conclusive identification test.
Frequently Asked Questions
What is the density of Composition B?
A commonly cited approximate value is 1.65 g/cm³, equivalent to about 1,650 kg/m³. The exact reported value depends on the specific formulation and measurement conditions.
Is Comp B density the same as 1.65 g/mL?
Yes, numerically: 1 cm³ equals 1 mL, so 1.65 g/cm³ and 1.65 g/mL are equivalent units.
How do you calculate density?
Divide the sample’s mass by its volume: ρ = m/V. Make sure the units are compatible; this calculator uses grams and cubic centimetres.
Does every sample of Comp B have the same density?
No single generic figure guarantees the density of every sample. Formulation, internal voids, condition, and the measurement convention can affect a reported value.
Can density confirm that an unknown material is Comp B?
No. Density alone is not a reliable identification method and should not be used to assess a suspected energetic material. Consult qualified authorities instead.
Related
Formula used
in m | Mass | g | 165 | 0 in v | Volume | cm³ | 100 | 0 out d | Density | g/cm³ | m / v | 4 out dk | Density | kg/m³ | d * 1000 | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Heat Gain and Loss Calculator for Calorimetry4,184.00 J
- Heat Output Calculator kW: Estimate Thermal Power1.395 kW
- Heat Calculation: Formula, Example, and Limits41,840 J
- Heat Energy Released Formula and Worked Example23,012 J
- Heat Transfer Equation for q: Formula and Examples41,840 J
- Heat Rate Formula: Calculate Energy per Unit Time166.67 W