molecalculator

Moles & Molar Mass

Electron Charge in Volts? Charge, Energy, and Voltage

Calculator No. 01-6140 · Updated · Formula and assumptions shown below

Electron charge −1.602 × 10−19 C
Electron potential energy change
−1.602 × 10−19 J
= Electron charge × Potential difference
Energy magnitude
1.000000 eV
Result, rounded to 6 decimal places
Potential difference
1 V
Set in the form below
You enter
Potential difference (V)
You get
Electron charge (C), Electron potential energy change (J), Energy magnitude (eV)
Rounding
6 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

An electron’s charge is not measured in volts: its charge is −1.602176634 × 10−19 coulombs (C). A volt measures electric potential difference, or energy per unit charge, so the useful related quantity is the energy an electron gains or loses when it crosses a voltage.

Formula

The calculator reports the electron’s fixed charge, then calculates its potential-energy change across a specified potential difference. The formulas are:

  • Electron charge: q = −1.602176634 × 10−19 C.
  • Potential-energy change: ΔU = qΔV.
  • Energy magnitude in electronvolts: |ΔU| / (1.602176634 × 10−19 J/eV).

Here, q is electron charge in coulombs, ΔV is the signed potential difference in volts, and ΔU is the signed change in electric potential energy in joules. One electronvolt (eV) is exactly 1.602176634 × 10−19 joules. The first result, electron charge, is constant; the voltage input changes the energy results. A negative voltage is allowed and reverses the sign of the energy change.

Worked Example

Using the default potential difference of 1 V:

  1. Electron charge: q = −1.602176634 × 10−19 C.
  2. Energy change: ΔU = qΔV = (−1.602176634 × 10−19 C)(1 V) = −1.602176634 × 10−19 J.
  3. Energy magnitude: |ΔU| / (1.602176634 × 10−19 J/eV) = 1.000000 eV.

The negative sign describes the change for a charge crossing a rise of 1 V in electric potential; the energy magnitude is 1 eV. The calculator rounds outputs to six decimal places, so the displayed charge and joule value are −0.000000 and −0.000000 if interpreted as ordinary decimal text. In practice, these tiny values should be read in scientific notation: −1.602177 × 10−19 C and −1.602177 × 10−19 J. The energy in eV is 1.000000.

Assumptions

  • The voltage entered is the potential difference between the electron’s starting and ending points, with the sign kept as entered.
  • The calculation concerns the change in electric potential energy, not kinetic energy in every possible setup. Other forces or energy transfers may also matter.
  • The electron charge and joule-to-electronvolt conversion use exact defined constants.

Why Charge Is Not Measured in Volts

Charge and voltage describe different properties. Charge measures how much electric charge an object carries; its SI unit is the coulomb. Voltage describes a difference in electric potential between two locations; its SI unit is the volt. A volt is equivalent to one joule per coulomb:

1 V = 1 J/C.

That unit relationship explains why voltage can tell you how much energy is transferred per unit charge, but it does not make volts a unit of charge. To work out an energy change, you need both a charge and a potential difference: energy change equals charge multiplied by voltage.

The electron has negative charge, while a proton has positive charge of the same magnitude. The elementary charge, e = 1.602176634 × 10−19 C, is the positive magnitude used to describe either particle’s charge. Thus an electron’s charge is −e, not +e.

What One Volt Does to an Electron

When a particle with charge magnitude e moves through a potential difference whose magnitude is 1 V, the magnitude of its potential-energy change is 1 eV. This is the origin of the electronvolt. Despite its name, an electronvolt is a unit of energy, not charge and not voltage.

The sign requires care. For a charge q moving from a starting point to an endpoint, the potential-energy change is ΔU = q(Vend − Vstart). An electron moving toward a point of higher electric potential has a negative change in electric potential energy. In an ideal situation where only electric forces do work, that lost potential energy becomes kinetic energy. Reversing the direction of travel or the voltage difference reverses the sign.

For example, a potential difference with magnitude 5 V corresponds to an energy-change magnitude of 5 eV for one electron. In joules, that is 5 × 1.602176634 × 10−19 J = 8.01088317 × 10−19 J. The sign depends on how the potential difference and direction are defined.

Using the Calculator and Interpreting Results

Enter a signed potential difference in volts. The fixed electron charge is displayed alongside the signed energy change in joules and the energy magnitude in electronvolts. Use a positive voltage for a rise in electric potential from start to finish, and a negative voltage for a fall. If you only need the energy amount, use the magnitude result; if you need the direction of the energy change, retain the sign of the joule result.

  • Charge: always −1.602176634 × 10−19 C for a single electron.
  • Energy change: signed; it depends on the electron’s direction relative to the potential difference.
  • Energy in eV: shown as a positive magnitude, useful for comparing particle, atomic, and electronic energies.

A frequent mix-up is to say “an electron has one volt of charge.” The accurate statement is that an electron has charge −e, and crossing a potential difference of 1 V corresponds to an energy-change magnitude of 1 eV. Another common confusion is treating eV as a unit of voltage. It is an energy unit; volts remain joules per coulomb.

Where Electronvolts Are Useful

Joules are convenient for everyday energy calculations, but a single electron’s energy is extremely small in joules. Electronvolts make it easier to describe energy scales in atomic and particle physics, spectroscopy, and semiconductor physics. For instance, energy levels and energy gaps are often stated in eV, while larger energy totals can be expressed in multiples such as keV or MeV.

Voltage-to-energy conversion is especially useful when an electron is accelerated through a known potential difference. However, voltage alone does not determine the full behavior of an electron in a real device. Electric-field shape, collisions, magnetic fields, material properties, and energy losses can affect its motion. The simple relationship gives the electric potential-energy change associated with the stated voltage, not a complete simulation of a system.

Frequently Asked Questions

How many volts is an electron?
An electron is not a number of volts. It has charge −1.602176634 × 10−19 C. A voltage across a path can be used with that charge to calculate an energy change.

How much energy does an electron gain across 1 volt?
The magnitude is 1 eV, equal to exactly 1.602176634 × 10−19 J. Whether its potential energy rises or falls depends on the direction of travel and the signed voltage difference.

Is an electronvolt the same as a volt?
No. An electronvolt is a unit of energy; a volt is a unit of electric potential difference. One electronvolt is the energy magnitude associated with a charge of one elementary-charge magnitude across 1 V.

Why is an electron’s charge negative?
The electron is assigned the negative member of the elementary-charge pair. Its charge is −e, while a proton’s charge is +e; the magnitudes are equal.

What is the electron’s charge in coulombs?
It is exactly −1.602176634 × 10−19 C. The value is fixed by the SI definition of the elementary charge.

Related

Formula used
in v | Potential difference | V | 1 | 0
out q | Electron charge | C | -1.602176634e-19 | 6
out u | Electron potential energy change | J | q * v | 6
out ev | Energy magnitude | eV | abs(q * v) / 1.602176634e-19 | 6

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →