The electron configuration for a p subshell is written with the principal quantum number (n), the letter ‘p’, and a superscript showing the number of electrons in that subshell, such as 2p6 or 3p3. To write the full configuration for an element, you fill the subshells in order of increasing energy (Aufbau principle) and then list them in order of increasing n.
Formula
The notation for a p subshell is simply:
n px
- n = principal quantum number (1, 2, 3, …), indicating the shell (energy level).
- p = the subshell type (azimuthal quantum number ℓ = 1).
- x = number of electrons in that subshell, from 0 to 6 (a p subshell has 3 orbitals, each holding 2 electrons).
For example, the configuration 3p3 means 3 electrons in the p subshell of the third shell. The superscript is always an integer between 0 and 6. When x = 0, the subshell is empty and is usually omitted from the full configuration.
Worked Example
Using the calculator defaults: n = 3, e = 3.
Step 1: Identify the principal quantum number: n = 3.
Step 2: Identify the number of electrons in the p subshell: x = 3.
Step 3: Write the notation: 3p3.
So the result is 3p3. This is the p-subshell part of the configuration for phosphorus (atomic number 15), whose full configuration is 1s2 2s2 2p6 3s2 3p3.
Assumptions
- The notation follows the standard Aufbau (building-up) principle.
- The p subshell has three orbitals, each holding a maximum of two electrons (Pauli exclusion principle).
- Electrons fill orbitals singly before pairing (Hund’s rule), but this does not change the number of electrons in the subshell.
- The calculator simply formats the notation; it does not determine which element has that configuration.
How to Write the Full Electron Configuration
To write the full electron configuration for an element, follow these steps:
- Find the atomic number (Z) – this equals the number of electrons in a neutral atom.
- Fill the subshells in order of increasing energy using the Aufbau sequence: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p.
- For each subshell, add electrons up to its maximum capacity (s=2, p=6, d=10, f=14) until you have placed all Z electrons.
- Write the subshells in order of increasing n (shell number), not necessarily the order of filling. For example, after filling 4s and 3d, write 3d before 4s.
Example: For iron (Z=26), the filling order is 1s, 2s, 2p, 3s, 3p, 4s, 3d. The full configuration is 1s2 2s2 2p6 3s2 3p6 4s2 3d6 – note that 3d is written before 4s even though it fills after.
Why p Subshells Matter
The p block of the periodic table (groups 13–18) contains elements whose last added electron goes into a p subshell. These elements include nonmetals (like oxygen and chlorine), metalloids (like silicon), and some metals (like aluminum). The number of electrons in the outermost p subshell determines the element’s valence electron count and often its chemical behavior. For example, noble gases (except helium) have a full p6 subshell, which contributes to their low reactivity.
Common Mistakes and Misconceptions
- Mixing up filling order and writing order: The Aufbau order is not the same as the final written order. For example, potassium fills 4s before 3d, but the configuration is written as … 3d1 4s2 only after the 3d is filled. Actually, for potassium (Z=19) the configuration is 1s2 2s2 2p6 3s2 3p6 4s1 – there is no 3d electron. The 3d subshell only starts filling after 4s is complete (for scandium, Z=21).
- Assuming p subshells can hold more than 6 electrons: A p subshell has three orbitals, each holding two electrons, so the maximum is 6. Never write p7 or higher.
- Using the principal quantum number incorrectly: The number before ‘p’ must be a positive integer (1, 2, 3, …). There is no 0p or 1.5p.
- Forgetting that the superscript is the number of electrons, not the number of orbitals: For example, 2p3 means 3 electrons, not 3 orbitals.
Using the Calculator
This calculator is a simple formatting tool: you enter the principal quantum number and the number of electrons in the p subshell, and it outputs the notation. It does not tell you which element has that configuration – you need to know the atomic number and the order of filling to determine that. For practice, try entering n=2 and e=6 to get 2p6, which is the p subshell for neon (Z=10).
Frequently Asked Questions
What does the superscript in p4 mean?
The superscript is the number of electrons in that p subshell. For example, 2p4 means the 2p subshell has 4 electrons. Since a p subshell can hold up to 6 electrons, the superscript ranges from 0 to 6.
Why is the p subshell written after s in configurations like 2p6?
Because within a given shell, the s subshell has lower energy than the p subshell. Electrons fill the lower-energy s first, then the p. In the written configuration, subshells are listed in order of increasing n and, for the same n, increasing ℓ (s, p, d, f).
How many electrons can the p subshell hold?
The p subshell has three orbitals, each holding two electrons, so it can hold a maximum of 6 electrons. This is why the superscript never exceeds 6.
What is the electron configuration of oxygen?
Oxygen has atomic number 8. Its configuration is 1s2 2s2 2p4. The 2p subshell has 4 electrons.
Is there a p subshell in the first shell?
No. The first shell (n=1) has only an s subshell. The p subshell first appears at n=2. So configurations never start with 1p.
How does Hund’s rule affect p subshell filling?
Hund’s rule says that electrons fill each orbital singly before pairing. For a p subshell with three orbitals, the first three electrons go into separate orbitals with parallel spins, and the fourth electron pairs with one of them. This affects the electron arrangement but not the total count in the subshell.
Limits of the Simple Notation
The simple n px notation does not show the distribution of electrons among the three p orbitals, nor does it indicate the spin states. For that, you need orbital diagrams or quantum numbers. Additionally, some transition metals and heavier elements have exceptions to the Aufbau principle (e.g., chromium and copper), where a d subshell is half-filled or fully filled at the expense of an s electron. These exceptions are beyond the scope of this basic notation but are important for accurate configurations of those elements.
For any lab work involving electron configurations, follow your course materials and instructor’s guidance. This page is for educational purposes only.
Related
Formula used
in n | Principal quantum number n | - | 3 | 1 | 7 in e | Electrons in p subshell | - | 3 | 0 | 6 out config | Electron configuration notation | - | n + 'p' + e | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Calculate Fahrenheit in R: A Step-by-Step Guide77.00 °F
- d Block Electron Configuration: How It Works
- Electron Configuration of a Carbon Atom0.2000 mol/L
- Electron Configuration of Cl (Chlorine)
- Electron Configuration Notes: How to Write Them
- Upp Calculator Ato? Meaning & How to Use It15,750 AUD