The electron configuration for potassium (K, atomic number 19) is 1s2 2s2 2p6 3s2 3p6 4s1, often abbreviated as [Ar] 4s1. This means potassium has 19 electrons arranged in shells, with a single valence electron in the fourth energy level (n=4).
Why the 4s Orbital Fills Before 3d
Potassium is the classic example of an apparent exception to the simple “fill by energy level” rule. Naively, you might expect the 19th electron to go into the 3d subshell, making the configuration 1s2 2s2 2p6 3s2 3p6 3d1. That is not what happens. The 4s subshell has a lower energy than the 3d subshell for neutral atoms of potassium and calcium, so the 4s orbital is filled first.
The reason is subtle: the 3d orbital is much more compact and closer to the nucleus, but it is also more strongly shielded by the inner electrons. The 4s orbital, though higher in principal quantum number, has a radial distribution that penetrates closer to the nucleus, lowering its effective energy. The Aufbau principle (which states that electrons fill the lowest-energy orbitals first) holds, but the exact energy ordering is 1s < 2s < 2p < 3s < 3p < 4s < 3d < 4p. This ordering is what gives potassium its characteristic single outer electron.
Step-by-Step Filling for Potassium
Potassium has 19 protons, so a neutral atom has 19 electrons. The order of filling, following the Aufbau principle and Hund’s rule, works like this:
- 1s subshell: holds 2 electrons → 1s2 (2 total)
- 2s subshell: holds 2 electrons → 2s2 (4 total)
- 2p subshell: holds 6 electrons → 2p6 (10 total)
- 3s subshell: holds 2 electrons → 3s2 (12 total)
- 3p subshell: holds 6 electrons → 3p6 (18 total)
- 4s subshell: holds 1 electron → 4s1 (19 total)
Each subshell must be completely filled before moving to the next one in the energy order. The 3d orbital is skipped at this point because it is higher in energy than 4s for potassium. The next element, calcium (Z=20), also fills 4s with a second electron, giving [Ar] 4s2. Only after calcium do the transition metals begin filling the 3d subshell.
Noble Gas Shorthand Notation
Writing out all 19 electrons is tedious. The shorthand uses the previous noble gas, argon (Z=18), which has the configuration 1s2 2s2 2p6 3s2 3p6. Since potassium has all those same core electrons plus one more, the shorthand is simply [Ar] 4s1. The [Ar] core represents the 18 electrons that exactly match argon’s configuration.
This shorthand is not just a convenience; it emphasizes the chemically important part of the configuration. The valence electron (the 4s1 electron) is what determines potassium’s chemistry. It is the electron that is lost when potassium forms a K+ ion, and it is the electron that makes potassium highly reactive with nonmetals.
Potassium’s Valence Electron and Ion Formation
The single 4s electron is loosely held, which explains potassium’s behavior. The first ionization energy of potassium is relatively low (about 418.8 kJ/mol), meaning it takes little energy to remove that electron. When potassium reacts, it typically loses this electron to form a cation with a +1 charge: K → K+ + e−.
The resulting K+ ion has the electron configuration of argon: 1s2 2s2 2p6 3s2 3p6. This is an extremely stable, filled-shell configuration, which is why potassium salts are so common and why potassium is never found as a free element in nature. The ion is isoelectronic with argon and with the chloride ion (Cl−), which also has 18 electrons.
Common Misconception: The 3d Orbital
Many students write potassium’s configuration with a 3d1 because they count orbitals by principal quantum number (n). The misconception is that the third shell must be completely full before the fourth shell starts. In reality, the 4s orbital is lower in energy than 3d, so it fills first. This is confirmed by experimental evidence: the spectrum of potassium shows that the 4s electron is the ground state, and the 3d level is empty.
Another related misconception is that the 3d1 configuration would be more stable because it is “closer” to the nucleus. In fact, the 3d orbital has a higher effective energy due to poor shielding of the 4s orbital’s penetrating lobe. The actual ground state is [Ar] 4s1, and the [Ar] 3d1 configuration is an excited state that would require energy input to reach.
Orbital Diagram Representation
An orbital diagram shows each orbital as a box and each electron as an arrow. For potassium, the orbital diagram would show:
- 1s: ↑↓ (one box, two electrons)
- 2s: ↑↓ (one box, two electrons)
- 2p: ↑↓ ↑↓ ↑↓ (three boxes, six electrons)
- 3s: ↑↓ (one box, two electrons)
- 3p: ↑↓ ↑↓ ↑↓ (three boxes, six electrons)
- 4s: ↑ (one box, one electron)
The 3d orbitals (five boxes) are completely empty for potassium. This diagram makes it clear that the 4s orbital is half-filled with a single unpaired electron, which is why potassium is paramagnetic (attracted to magnetic fields). The unpaired electron is also the reason potassium is a good reducing agent.
Comparison with Neighboring Elements
Potassium sits below sodium in the periodic table, and both have similar configurations: sodium is [Ne] 3s1, and potassium is [Ar] 4s1. Both have one valence electron, which is why they are in Group 1 (alkali metals). The difference is the principal quantum number of the valence shell (n=3 for Na, n=4 for K), which makes potassium’s valence electron farther from the nucleus and even easier to remove.
Argon (Z=18) has a completely filled 3p subshell and no 4s electrons. Calcium (Z=20) has [Ar] 4s2, completing the 4s subshell. The transition metal scandium (Z=21) is the first element to place an electron in the 3d subshell, giving [Ar] 3d1 4s2. This sequence shows that the 4s fills before 3d for the first two elements, then the 3d begins to fill while the 4s remains occupied.
Frequently Asked Questions
What is the electron configuration of K+?
The potassium ion K+ has 18 electrons (one fewer than neutral K). Its configuration is identical to argon: 1s2 2s2 2p6 3s2 3p6, or simply [Ar]. The 4s electron is the one removed when forming the ion.
Why is potassium’s configuration not [Ar] 3d1?
Because the 4s orbital is lower in energy than the 3d orbital for neutral potassium. The Aufbau principle dictates filling the lowest-energy orbital first, which is 4s. The 3d orbital only becomes lower in energy than 4s for elements after calcium (starting with scandium).
How many valence electrons does potassium have?
Potassium has exactly one valence electron, located in the 4s subshell. This single electron is responsible for its +1 oxidation state and its placement in Group 1 of the periodic table.
What does the notation [Ar] mean in the configuration?
[Ar] is shorthand for the electron configuration of argon (1s2 2s2 2p6 3s2 3p6). It represents the 18 core electrons that potassium shares with argon, so only the valence electron needs to be written explicitly.
Is potassium’s electron configuration an exception to the Aufbau principle?
No, it is not an exception. The Aufbau principle states that electrons fill orbitals in order of increasing energy. For potassium, the 4s orbital genuinely has lower energy than 3d, so filling 4s first follows the principle correctly. Exceptions occur in some transition metals (like chromium and copper) where half-filled or fully filled d subshells are more stable.
How does potassium’s configuration relate to its reactivity?
The single 4s electron is very loosely held because it is in a higher energy level and is shielded from the nucleus by the inner 18 electrons. This makes potassium extremely reactive, especially with water, where it loses the electron to form K+ and hydrogen gas. The stability of the resulting [Ar] configuration drives this reaction.
Related
General steps for current mainstream versions; menus can differ by device and version. See the disclaimer or report an error.
More in this section
- Calculate Fahrenheit in R: A Step-by-Step Guide77.00 °F
- d Block Electron Configuration: How It Works
- Electron Configuration of a Carbon Atom0.2000 mol/L
- Electron Configuration of Cl (Chlorine)
- Electron Configuration Notes: How to Write Them
- Upp Calculator Ato? Meaning & How to Use It15,750 AUD