molecalculator

Moles & Molar Mass

Electron Configuration of Re (Rhenium)

Calculator No. 01-10778 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The electron configuration of rhenium (Re, atomic number 75) is [Xe] 4f14 5d5 6s2. In full form, it is 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6 4f14 5d5 6s2. This arrangement explains rhenium’s high melting point, its multiple oxidation states, and its catalytic behavior.

Formula

The electron configuration is built by filling atomic orbitals in order of increasing energy, following the Aufbau principle. The order is: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p. Each orbital holds a maximum number of electrons:

  • s orbitals: 2 electrons
  • p orbitals: 6 electrons
  • d orbitals: 10 electrons
  • f orbitals: 14 electrons

For rhenium (Z = 75), the filling sequence is: 1s2 (2), 2s2 (4), 2p6 (10), 3s2 (12), 3p6 (18), 4s2 (20), 3d10 (30), 4p6 (36), 5s2 (38), 4d10 (48), 5p6 (54), 6s2 (56), 4f14 (70), 5d5 (75). The condensed form uses the previous noble gas core [Xe] (Z = 54).

Worked Example

Let’s write the configuration for rhenium step by step, using Z = 75.

  1. Start with the noble gas core: [Xe] accounts for 54 electrons.
  2. Remaining electrons: 75 − 54 = 21.
  3. Fill 6s: 2 electrons (total 56).
  4. Fill 4f: 14 electrons (total 70).
  5. Fill 5d: 5 electrons (total 75).

The condensed configuration is [Xe] 4f14 5d5 6s2. The calculator above uses the same Aufbau order to produce this result for any atomic number you enter.

Assumptions

  • The Aufbau principle is applied in the standard order (Madelung rule).
  • Exceptions to the Aufbau rule (e.g., chromium, copper) are not accounted for; rhenium is a regular case.
  • The configuration is for a neutral, ground-state atom.

Why Rhenium’s Configuration Matters

Rhenium sits in group 7, period 6, right below manganese. Its 5d5 6s2 valence shell is half-filled in the d subshell, which gives it extra stability. This configuration leads to a very high melting point (3,186 °C, the third highest among elements) because the d electrons participate in strong metallic bonding. It also explains why rhenium can adopt oxidation states from −1 to +7, with +7 being the most common (e.g., in ReO4− and Re2O7). The 5d orbitals are large and diffuse, allowing rhenium to form multiple bonds and act as a versatile catalyst, especially in reforming petroleum and in superalloys for jet engine turbine blades.

How to Read and Write Configurations

When writing any electron configuration, you list subshells in the order of increasing energy (not the periodic table order). For rhenium, the 4f subshell fills before 5d because 4f has lower energy than 5d in neutral atoms. A common mistake is to write 5d7 6s0 or to put 5d before 4f. Always check the total electrons: the sum of superscripts must equal the atomic number. For rhenium, 14 + 5 + 2 = 21, plus the 54 from [Xe] gives 75.

To find the configuration of any element, locate it in the periodic table and follow the period and group. Rhenium is in period 6, so the 6s is filled first, then 4f, then 5d. The d-block count (groups 3–12) tells you how many d electrons: rhenium is group 7, so 5d5 (since the first d element in period 6, lanthanum, is 5d1, but lanthanum is actually 5d1 6s2; for rhenium, count from the left of the d block: group 3 → 5d1, group 4 → 5d2, … group 7 → 5d5).

Common Misconceptions

One misconception is that the 6s electrons are always removed first when forming ions. For rhenium, the neutral atom has 6s2, but when it forms Re3+ or Re7+, the 6s electrons are removed before the 5d electrons. For example, Re7+ has configuration [Xe] 4f14 5d0 (or simply [Xe] 4f14). Another misconception is that the 4f subshell is “inner” and doesn’t affect chemistry, but for lanthanides and rhenium, the 4f electrons influence magnetic and optical properties, though for rhenium the 5d electrons are the main players in bonding.

Also, some people confuse rhenium with technetium (Tc, Z=43). Technetium has [Kr] 4d5 5s2, which is analogous to rhenium’s [Xe] 4f14 5d5 6s2. Both are group 7 elements, but rhenium is stable while technetium is radioactive with no stable isotopes.

Practical Uses of Rhenium’s Configuration

Knowing the electron configuration helps predict chemical behavior:

  • Oxidation states: The 5d5 6s2 electrons can all be removed or shared, giving states up to +7.
  • Catalysis: Rhenium catalysts (e.g., Re2O7 on alumina) are used in olefin metathesis and petroleum reforming; the d electrons allow substrate binding.
  • Alloys: Rhenium is added to nickel-based superalloys to improve high-temperature creep resistance, because its electron configuration strengthens metallic bonds.
  • Thermocouples: Re–W thermocouples operate above 2000 °C, relying on the metal’s stability.

Frequently Asked Questions

What is the shorthand electron configuration for rhenium?

The shorthand is [Xe] 4f14 5d5 6s2. The [Xe] core represents the 54 electrons of xenon, and the remaining 21 electrons are distributed as shown.

Why is rhenium’s configuration not [Xe] 4f14 5d6 6s1?

Some transition metals (like chromium and copper) have exceptions to the Aufbau rule to achieve half-filled or fully filled d subshells. Rhenium, however, follows the regular order: 6s fills before 5d, and the 5d5 6s2 arrangement is lower in energy than 5d6 6s1. The half-filled 5d subshell is stable, but the full 6s subshell is even more stable, so the regular filling is preferred.

How many valence electrons does rhenium have?

Rhenium has 7 valence electrons: the 5d5 and 6s2 electrons. These are the electrons involved in chemical bonding and determine its group number (7).

What is the electron configuration of Re3+?

For Re3+, remove three electrons from the neutral atom, starting with the 6s electrons, then one 5d electron. So Re3+ is [Xe] 4f14 5d4. The 4f electrons are not removed because they are lower in energy and more tightly bound.

Is rhenium’s configuration similar to manganese’s?

Yes. Manganese (Z=25) has [Ar] 3d5 4s2, which is the same pattern as rhenium’s [Xe] 4f14 5d5 6s2. Both have half-filled d subshells and two s electrons, giving them similar chemistry, though rhenium is much heavier and more metallic.

Related

Formula used
in z | Atomic number Z | - | 75 | 1 | 118
out ec | Electron configuration (condensed) | - | 'config' | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →