molecalculator

Moles & Molar Mass

Electron Configuration Rn: Radon’s Shells & Notation

Calculator No. 01-10809 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Radon (Rn) has the atomic number 86, so its electron configuration is [Xe] 4f14 5d10 6s2 6p6. This means a neutral radon atom holds 86 electrons arranged in shells and subshells, ending with a completely filled 6p subshell, which makes radon a noble gas with a full valence shell. Enter the atomic number or element name below to see the full electron configuration for any element, including the shorthand noble-gas notation.

Formula

Electron configurations follow the Aufbau principle, which fills orbitals in order of increasing energy. The standard order is:

1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p

Each subshell holds a maximum number of electrons: s = 2, p = 6, d = 10, f = 14. The full configuration lists every occupied subshell with a superscript for electron count. The noble-gas shorthand replaces the core (the configuration of the previous noble gas) with its symbol in brackets, then writes only the outer electrons.

For radon (Z = 86), the full configuration is:

1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2 4f14 5d10 6p6

The shorthand is [Xe] 4f14 5d10 6s2 6p6, because xenon (Z = 54) accounts for the first 54 electrons.

Worked Example

Let’s build the configuration for radon (Z = 86) step by step, following the Aufbau order and filling each subshell to capacity:

  1. 1s2 → 2 electrons (total 2)
  2. 2s2 → 2 (total 4)
  3. 2p6 → 6 (total 10)
  4. 3s2 → 2 (total 12)
  5. 3p6 → 6 (total 18)
  6. 4s2 → 2 (total 20)
  7. 3d10 → 10 (total 30)
  8. 4p6 → 6 (total 36)
  9. 5s2 → 2 (total 38)
  10. 4d10 → 10 (total 48)
  11. 5p6 → 6 (total 54)
  12. 6s2 → 2 (total 56)
  13. 4f14 → 14 (total 70)
  14. 5d10 → 10 (total 80)
  15. 6p6 → 6 (total 86)

Adding all superscripts: 2+2+6+2+6+2+10+6+2+10+6+2+14+10+6 = 86. The shorthand uses the noble gas core [Xe] (which covers the first 54 electrons), leaving 4f14 5d10 6s2 6p6.

Assumptions

  • The Aufbau principle applies: orbitals fill in order of increasing energy (1s, 2s, 2p, 3s, 3p, 4s, 3d, etc.).
  • Hund’s rule is followed: electrons fill degenerate orbitals singly before pairing.
  • The configuration is for a neutral, ground-state atom. Ions and excited states have different configurations.
  • For elements beyond the actinides, relativistic effects may alter the order slightly, but the standard order holds for Z ≤ 118.

How to Read an Electron Configuration

An electron configuration tells you how electrons are distributed among energy levels (n = 1, 2, 3…) and subshells (s, p, d, f). The number before the letter is the principal quantum number (shell), the letter is the subshell type, and the superscript is the number of electrons in that subshell.

For radon, the outermost shell is n = 6, with 6s2 and 6p6 giving 8 valence electrons. Like all noble gases, radon has a filled valence shell (s2p6), which explains its chemical inertness—it rarely forms compounds because it has no need to gain, lose, or share electrons.

Why Radon’s Configuration Matters

Radon is a radioactive noble gas produced naturally from the decay of uranium and thorium in rocks and soil. Its electron configuration explains several key properties:

  • Chemical inertness: The filled 6p subshell makes radon extremely unreactive. Only a few radon compounds, like RnF2, have been synthesized under extreme conditions.
  • Physical state: Radon is a gas at room temperature because the weak London dispersion forces between atoms are insufficient to condense it into a liquid or solid.
  • Radioactivity: Radon’s configuration does not affect its nuclear instability; it is the nucleus that decays, emitting alpha particles. The most stable isotope, Rn-222, has a half-life of 3.8 days.

Understanding the electron configuration helps predict why radon behaves like other noble gases (He, Ne, Ar, Kr, Xe) and why it is a health concern when it accumulates in enclosed spaces.

Common Mistakes and Misconceptions

  • Confusing the order of 4f and 5d: For radon, 4f fills before 5d, but many students write 5d before 4f. The Aufbau order is 6s → 4f → 5d → 6p.
  • Forgetting the noble-gas core: The shorthand [Xe] includes all 54 electrons of xenon; you must add the remaining 32 electrons explicitly.
  • Thinking radon has 8 valence electrons in the 6th shell: Yes, it has 8 (6s26p6), but the 4f and 5d electrons are also part of the configuration—they are just not valence electrons.
  • Assuming the configuration is the same for ions: Rn2+ would lose the two 6p electrons, giving [Xe] 4f14 5d10 6s2.

How to Write Configurations for Other Elements

To write any element’s configuration, follow these steps:

  1. Find the atomic number (Z) on the periodic table.
  2. Fill subshells in Aufbau order, adding electrons one at a time.
  3. Stop when you have placed Z electrons.
  4. For shorthand, locate the previous noble gas and replace its configuration with its symbol in brackets.

For example, for iron (Z = 26): full configuration is 1s2 2s2 2p6 3s2 3p6 4s2 3d6, shorthand is [Ar] 4s2 3d6. Note that 4s fills before 3d, even though 3d is lower in energy once occupied.

Limitations of the Aufbau Principle

The Aufbau principle is a useful guide, but it has exceptions, especially for transition metals and lanthanides. For example, chromium (Z = 24) is [Ar] 4s1 3d5, not 4s2 3d4, because a half-filled d subshell is more stable. Similarly, copper is [Ar] 4s1 3d10. For radon, however, the Aufbau order works perfectly because all subshells are completely filled—there is no ambiguity.

Frequently Asked Questions

What does the electron configuration of radon look like in full?

The full configuration is 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d10 5p6 6s2 4f14 5d10 6p6. The shorthand is [Xe] 4f14 5d10 6s2 6p6.

How many valence electrons does radon have?

Radon has 8 valence electrons: 2 in the 6s subshell and 6 in the 6p subshell. This full octet is why radon is chemically inert and rarely forms compounds.

Why is radon a gas if it has so many electrons?

Radon’s electron configuration gives it a complete valence shell, so there are no unpaired electrons to form covalent bonds. The only intermolecular forces are weak London dispersion forces, which are not strong enough to hold the atoms together as a liquid or solid at room temperature.

Is radon’s electron configuration the same as that of a noble gas?

Yes, radon is a noble gas, and its configuration ends in s2p6, just like helium, neon, argon, krypton, and xenon. It is the heaviest noble gas in group 18.

How does radon’s configuration relate to its radioactivity?

Electron configuration describes the electron cloud, not the nucleus. Radon’s radioactivity comes from an unstable nucleus with too many neutrons (e.g., Rn-222 has 136 neutrons). The electrons play no role in alpha or beta decay.

Can radon form chemical bonds?

Under normal conditions, no. But in 1962, chemists synthesized RnF2 using strong oxidizing agents like fluorine. This is possible because radon’s 6p electrons can be ionized under extreme conditions, but such compounds are highly unstable and radioactive.

Related

Formula used
in z | Atomic number Z | - | 86 | 1 | 118
out config | Full electron configuration | - | if(z

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →