molecalculator

Moles & Molar Mass

Electron Configuration: What It Looks Like

Calculator No. 01-11169 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

An electron configuration is a written notation that shows how electrons are distributed among the atomic orbitals of an atom. It looks like a sequence of numbers, letters, and superscripts, for example 1s² 2s² 2p⁶ 3s¹ for sodium, where each term identifies an orbital (e.g., 2p) and the superscript tells how many electrons occupy it. This notation is a compact map of an atom’s electron shell structure, and it explains the element’s chemical behavior and position in the periodic table.

What the Notation Means

Each part of the configuration has a specific meaning:

  • Principal quantum number (n): the number before the letter (1, 2, 3, …) indicates the energy level or shell. Higher n means the electron is farther from the nucleus and has higher energy.
  • Subshell letter: s, p, d, or f indicates the shape of the orbital. s orbitals are spherical, p orbitals are dumbbell-shaped, d and f are more complex.
  • Superscript: the number of electrons in that subshell. Maximum capacities are s = 2, p = 6, d = 10, f = 14.

For example, the configuration 1s² 2s² 2p⁶ 3s¹ means: 2 electrons in the 1s subshell, 2 in 2s, 6 in 2p, and 1 in 3s. Adding the superscripts (2+2+6+1) gives the total number of electrons, which equals the atomic number for a neutral atom.

How to Write an Electron Configuration

To write a configuration, you fill orbitals in order of increasing energy, following the Aufbau principle. The standard order is:

  1. 1s
  2. 2s, 2p
  3. 3s, 3p
  4. 4s, 3d, 4p
  5. 5s, 4d, 5p
  6. 6s, 4f, 5d, 6p
  7. 7s, 5f, 6d, 7p

Each orbital holds a maximum of 2 electrons (Pauli exclusion principle). Within a subshell, electrons occupy empty orbitals singly before pairing (Hund’s rule). For example, nitrogen (Z=7) has 1s² 2s² 2p³, with the three 2p electrons in three separate orbitals.

For elements beyond argon (Z=18), you can use the noble gas shorthand: write the symbol of the preceding noble gas in brackets, then continue with the remaining configuration. For potassium (Z=19), that’s [Ar] 4s¹ instead of 1s² 2s² 2p⁶ 3s² 3p⁶ 4s¹.

Worked Example: Sodium (Z = 11)

Using the calculator with atomic number 11, the output is 1s² 2s² 2p⁶ 3s¹. Here’s how it’s built:

  • Fill 1s: 2 electrons (total 2)
  • Fill 2s: 2 electrons (total 4)
  • Fill 2p: 6 electrons (total 10)
  • Fill 3s: 1 electron (total 11)

So the configuration is 1s² 2s² 2p⁶ 3s¹. The sum of superscripts equals 11, the atomic number.

Assumptions

  • The atom is neutral (number of electrons = atomic number).
  • The Aufbau principle applies; exceptions for transition metals and lanthanides are not shown in this simple calculator.
  • Orbital filling follows the Madelung rule (order of increasing n + l).

Common Mistakes and Misconceptions

One frequent error is writing 3d before 4s. In the standard Aufbau order, 4s fills before 3d because 4s has lower energy. However, when writing the configuration, you list subshells in order of principal quantum number: for scandium (Z=21), it’s [Ar] 3d¹ 4s², not 4s² 3d¹.

Another misconception is that the superscripts represent “shells” in a simple way. The 3d electrons are not “outer” in the sense of being the last added; they are in the third shell but have higher energy than 4s. This affects chemical properties, such as why transition metals have multiple oxidation states.

Also, the configuration of chromium (Z=24) is [Ar] 3d⁵ 4s¹, not [Ar] 3d⁴ 4s², due to the extra stability of a half-filled d subshell. Copper (Z=29) is [Ar] 3d¹⁰ 4s¹ for a filled d subshell. These are exceptions to the Aufbau rule.

Comparisons: Full vs. Noble Gas Shorthand

The full configuration lists every subshell, which becomes long for heavy elements. The noble gas shorthand compresses the core electrons. For example, iron (Z=26):

  • Full: 1s² 2s² 2p⁶ 3s² 3p⁶ 3d⁶ 4s²
  • Shorthand: [Ar] 3d⁶ 4s²

The shorthand is easier to read and highlights the valence electrons (the ones in the outermost shell, which are 4s² for iron).

Why Electron Configurations Matter

Electron configurations determine an element’s chemical properties:

  • Valence electrons (outermost shell) participate in bonding. Elements in the same group have similar configurations and thus similar reactivity.
  • Periodicity: The periodic table is arranged by electron configuration. The period number equals the highest principal quantum number of an occupied orbital.
  • Magnetism and color: Partially filled d or f subshells give transition metals their colored compounds and magnetic properties.
  • Ion formation: When forming ions, electrons are removed from the subshell with the highest n (e.g., iron loses 4s electrons before 3d).

Limits of the Simple Aufbau Model

The Aufbau principle works well for most elements, but it fails for some transition metals and lanthanides/actinides. For example, the actual configuration of tungsten (Z=74) is [Xe] 4f¹⁴ 5d⁴ 6s², not the predicted [Xe] 4f¹⁴ 5d⁴ 6s²? Actually, it’s [Xe] 4f¹⁴ 5d⁴ 6s², but the predicted would be 5d⁴ 6s²? Let’s check: tungsten has 6 valence electrons, so it should be 5d⁴ 6s², which matches. A better example is gold (Z=79): predicted [Xe] 4f¹⁴ 5d⁹ 6s², but actual is [Xe] 4f¹⁴ 5d¹⁰ 6s¹. These deviations arise from electron-electron repulsion and relativistic effects, especially for heavy elements.

For most chemistry up to the first few periods, the simple rules are sufficient. The calculator here uses the standard Aufbau order and does not account for these exceptions.

Frequently Asked Questions

What does the superscript in an electron configuration mean?

The superscript tells you how many electrons are in that specific subshell. For example, in 2p⁶, the “6” means there are six electrons in the 2p subshell. The sum of all superscripts equals the total number of electrons in the atom.

How do I write the electron configuration for an ion?

For a cation (positive ion), remove electrons from the subshell with the highest principal quantum number first. For example, Fe (Z=26) is [Ar] 3d⁶ 4s²; Fe³⁺ loses two 4s electrons and one 3d electron, giving [Ar] 3d⁵. For an anion, add electrons to the next available orbital, following the Aufbau order.

Why is chromium’s configuration [Ar] 3d⁵ 4s¹ instead of [Ar] 3d⁴ 4s²?

This is due to the extra stability of a half-filled d subshell (3d⁵). The exchange energy and reduced electron-electron repulsion make the 3d⁵ 4s¹ arrangement slightly lower in energy than 3d⁴ 4s². Similar reasoning applies to copper ([Ar] 3d¹⁰ 4s¹).

What is the difference between electron configuration and orbital diagram?

An electron configuration is a shorthand notation listing subshells and electron counts. An orbital diagram is a visual representation showing each orbital as a box or line, with arrows representing electrons and their spins. Orbital diagrams show unpaired electrons and spin, which configurations do not.

How does electron configuration relate to the periodic table?

The periodic table is organized by electron configuration. Elements in the same column (group) have the same number of valence electrons, which gives them similar chemical properties. The row (period) corresponds to the highest principal quantum number of an occupied orbital.

Can I use this calculator for any element?

Yes, the calculator works for atomic numbers 1 to 118, using the standard Aufbau order. However, it does not account for exceptions like chromium, copper, or heavier elements with relativistic effects. For those, you should consult a reliable periodic table or reference.

Related

Formula used
in z | Atomic number (Z) | - | 11 | 1 | 118
out ec | Electron configuration | - | conf(z) | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →