molecalculator

Moles & Molar Mass

Element K Atomic Number: 19 Explained

Calculator No. 01-9634 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The element with the symbol K is potassium, and its atomic number is 19. This means every neutral potassium atom contains 19 protons in its nucleus and 19 electrons surrounding it. The symbol K comes from the Latin name kalium, and the element sits in group 1 (alkali metals) and period 4 of the periodic table.

Formula

The calculator above computes the molarity (concentration) of a solution when you dissolve a known mass of a solute in a final volume of solution. The formula is:

c = m / (M × V)

where:

  • c = molarity (mol/L)
  • m = mass of solute (g)
  • M = molar mass of solute (g/mol)
  • V = final solution volume (L), converted from mL by dividing by 1000

This is the standard definition of molarity: moles of solute per liter of solution. The number of moles is first found by dividing the mass by the molar mass, then that mole count is divided by the volume in liters.

Worked Example

Using the default values from the calculator: you dissolve 2.922 g of sodium chloride (NaCl, molar mass 58.44 g/mol) in enough water to make 250 mL of solution.

Step 1: Convert volume to liters:

V = 250 mL / 1000 = 0.250 L

Step 2: Calculate moles of NaCl:

moles = 2.922 g / 58.44 g/mol = 0.05000 mol

Step 3: Divide moles by volume:

c = 0.05000 mol / 0.250 L = 0.2000 mol/L

The calculator shows 0.2000 mol/L (with 4 decimals), which equals 200.0 mM (millimolar). This matches the output exactly.

Assumptions

  • The solute is pure and fully dissolves without changing volume.
  • The final volume is the total solution volume, not the volume of solvent added.
  • Temperature and pressure are not considered; molarity is temperature-dependent because volume changes with temperature.
  • The molar mass is the formula weight of the anhydrous compound (no water of hydration).

Why Atomic Number 19 Matters

The atomic number defines the element. For potassium, 19 is not just a label—it determines the element’s chemical behavior. The 19 electrons arrange in shells: 2, 8, 8, 1. The single valence electron in the outermost shell is easily lost, forming a K+ ion with a +1 charge. This electron configuration places potassium in group 1, making it highly reactive, especially with water, where it produces potassium hydroxide and hydrogen gas with enough heat to ignite the hydrogen.

Knowing the atomic number also lets you determine the number of neutrons in a specific isotope. The most common isotope, potassium-39, has 20 neutrons (39 – 19 = 20). Potassium-40 (21 neutrons) is radioactive with a half-life of about 1.25 billion years and is used in potassium-argon dating of rocks. Potassium-41 (22 neutrons) is also stable.

How Potassium Differs from Other Elements

Potassium is often confused with sodium because both are alkali metals with similar reactivity. However, potassium is larger (atomic radius ~220 pm vs sodium’s ~180 pm) and more reactive. In the human body, potassium is the main intracellular cation, while sodium is the main extracellular cation. This difference is critical for nerve impulse transmission and muscle contraction. The atomic number 19 also means potassium has a higher atomic mass (39.0983 u) than sodium (22.990 u), which is why potassium salts are denser.

Common Mistakes When Working with Potassium

  • Confusing the symbol K with the element krypton (Kr). K is potassium, Kr is krypton.
  • Assuming potassium’s atomic number equals its mass number. The atomic number is 19, but the mass number varies with isotopes (39, 40, 41).
  • Mixing up potassium and phosphorus (P). Both are essential plant nutrients, but they are different elements with atomic numbers 19 and 15, respectively.
  • Forgetting that potassium is always +1 in compounds, so potassium chloride is KCl, not KCl2.

Practical Uses of Potassium

Potassium compounds are everywhere. Potassium chloride (KCl) is used as a salt substitute and in fertilizers. Potassium nitrate (KNO3) is a common oxidizer in fireworks and model rocket propellants. Potassium permanganate (KMnO4) is a strong oxidizing agent used in water treatment and as a disinfectant. In biology, potassium ions are vital for enzyme function and maintaining cellular osmotic balance. The atomic number 19 is also why potassium is an essential dietary mineral; the recommended daily intake for adults is about 3,500–4,700 mg, and deficiency (hypokalemia) can cause muscle weakness and cardiac arrhythmias.

How to Read the Periodic Table for K

On the periodic table, the entry for potassium shows the symbol K, the atomic number 19 above it, and the atomic mass 39.0983 below it. The atomic number is always the smaller integer, and it uniquely identifies the element. The atomic mass is the weighted average of all natural isotopes. For potassium, the mass is close to 39 because potassium-39 is about 93% abundant. If you see a periodic table with only the symbol and atomic number, you can still deduce the number of electrons and protons, and for a neutral atom, the number of electrons equals the atomic number.

Frequently Asked Questions

Why is potassium’s symbol K? The symbol K comes from the Latin word kalium, which itself derives from the Arabic al-qalyah (plant ashes). Potassium was first isolated from potash (potassium carbonate), but the symbol was standardized from the Latin name to avoid confusion with phosphorus (P).

Is potassium a metal or nonmetal? Potassium is a metal, specifically an alkali metal. It is soft, silvery-white, and can be cut with a knife. It is highly reactive and never found free in nature; it always occurs in compounds like feldspar, sylvite (KCl), and carnallite.

How many neutrons does potassium have? It depends on the isotope. The most common isotope, potassium-39, has 20 neutrons. Potassium-40 has 21 neutrons and is radioactive, while potassium-41 has 22 neutrons. The average atomic mass of 39.0983 reflects the mixture of these isotopes.

What happens if you eat too much potassium? Excess potassium (hyperkalemia) can be dangerous, leading to irregular heartbeat and cardiac arrest. Healthy kidneys normally excrete excess potassium, but people with kidney disease must monitor intake. Normal blood potassium levels are 3.5–5.0 mmol/L.

Does potassium react with water? Yes, vigorously. Potassium reacts with water to form potassium hydroxide (KOH) and hydrogen gas. The reaction is exothermic enough to ignite the hydrogen, producing a lilac-colored flame. This is why potassium is stored under oil.

Why is potassium important for plants? Potassium is one of the three primary macronutrients (NPK: nitrogen, phosphorus, potassium). It regulates stomatal opening, activates enzymes, and helps plants resist drought and disease. Fertilizers list potassium as K2O equivalent, but the actual element is K+.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →