molecalculator

Moles & Molar Mass

Element with 6 Protons and 5 Neutrons?

Calculator No. 01-8049 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The element with 6 protons is carbon, and with 5 neutrons it is the isotope carbon-11 (¹¹C). This radioactive isotope has a mass number of 11 and is commonly used in positron emission tomography (PET) scans.

Formula

To find the number of atoms in a given mass of carbon-11, use the formula:

Number of atoms = (mass in grams / molar mass in g/mol) × Avogadro’s constant

Where:

  • mass (m) is in grams
  • molar mass (mm) is the mass of one mole of the isotope, approximately 11.011 g/mol for carbon-11
  • Avogadro’s constant = 6.02214076 × 10²³ mol⁻¹

Worked Example

Using the default values: mass = 1 g, molar mass = 11.011 g/mol.

Number of atoms = (1 g / 11.011 g/mol) × 6.02214076 × 10²³ mol⁻¹

≈ 0.09082 mol × 6.02214076 × 10²³ mol⁻¹

≈ 5.470 × 10²² atoms

So 1 gram of carbon-11 contains about 5.470 × 10²² atoms.

Assumptions

  • The isotope is pure carbon-11.
  • The molar mass is taken as 11.011 g/mol (the atomic mass of ¹¹C).
  • The calculation assumes Avogadro’s constant exactly.

What Does 6 Protons and 5 Neutrons Mean?

The number of protons defines the element: every atom with 6 protons is carbon. The number of neutrons determines the isotope. Carbon-11 has 6 protons and 5 neutrons (6 + 5 = 11). Carbon-12, the most common isotope, has 6 neutrons. Carbon-13 has 7 neutrons, and carbon-14 has 8.

Carbon-11 is radioactive with a half-life of about 20.4 minutes. It decays by positron emission, turning a proton into a neutron and releasing a positron. This property makes it valuable in medical imaging, where it is used to label molecules like glucose or amino acids for PET scans.

How to Identify an Element from Protons and Neutrons

To identify an element from its subatomic particles:

  1. Count the protons – this gives the atomic number (Z).
  2. Look up the element with that atomic number on the periodic table.
  3. Add protons and neutrons to get the mass number (A).
  4. Write the isotope as element symbol with mass number superscript and atomic number subscript (e.g., ¹¹₆C).

For example, 6 protons = carbon, 5 neutrons = mass 11, so it’s carbon-11.

Common Misconceptions

A frequent mistake is confusing the mass number with the atomic mass. The mass number is a whole number (sum of protons and neutrons), while the atomic mass is the weighted average of all isotopes, which appears on the periodic table (for carbon it’s 12.011). Carbon-11 has a mass number of 11, but its atomic mass is approximately 11.011 u.

Another misconception is that all carbon atoms have 6 neutrons. In nature, about 98.9% of carbon is carbon-12 (6 neutrons), 1.1% is carbon-13 (7 neutrons), and trace amounts are carbon-14 (8 neutrons). Carbon-11 is not found naturally in significant amounts because it decays so quickly.

Why Carbon-11 Matters in Medicine

Carbon-11 is used in PET scans because its positron emission can be detected by the scanner. It is incorporated into biologically active molecules, such as:

  • Carbon-11 labeled glucose (for brain metabolism)
  • Carbon-11 labeled amino acids (for protein synthesis)
  • Carbon-11 labeled receptor ligands (for neuroreceptor studies)

The short half-life (20 minutes) means it must be produced on-site with a cyclotron and used quickly. This limits its use to facilities with a cyclotron, but it provides high-resolution images with low radiation dose to the patient.

How to Calculate Number of Atoms in a Sample

When working with any isotope, you can convert mass to number of atoms using the molar mass. For carbon-11, the molar mass is about 11.011 g/mol. The calculator above does this conversion. For example, if you have 0.5 g of carbon-11, you would get:

0.5 g / 11.011 g/mol × 6.022×10²³ = 2.735×10²² atoms

This is useful for planning radiochemical syntheses or estimating activity based on atom count.

Safety and Handling Considerations

Carbon-11 is radioactive and must be handled in licensed facilities with appropriate shielding and monitoring. The radiation dose from a single PET scan is small, but workers who produce and handle ¹¹C must follow strict safety protocols. Always follow your lab’s methods, the safety data sheet (SDS), and your supervisor’s instructions when working with radioactive materials.

Frequently Asked Questions

Is carbon-11 stable?

No, carbon-11 is radioactive with a half-life of about 20.4 minutes. It decays by positron emission to boron-11.

What is the difference between carbon-11 and carbon-12?

Carbon-11 has 5 neutrons while carbon-12 has 6. Carbon-12 is stable and the most abundant isotope, while carbon-11 is radioactive and short-lived.

How is carbon-11 produced?

It is produced in a cyclotron by bombarding nitrogen-14 with protons, which knocks out a neutron and leaves carbon-11.

Why is carbon-11 used in PET scans?

Because it emits positrons that can be detected by PET scanners, and its short half-life allows imaging with low radiation exposure.

Can carbon-11 be found in nature?

It is produced in the atmosphere by cosmic rays, but in extremely tiny amounts that decay quickly. It is not a significant natural isotope.

What is the mass number of an atom with 6 protons and 5 neutrons?

The mass number is 11 (6+5), so it is carbon-11.

Related

Formula used
in m | Mass of isotope | g | 1 | 0
in mm | Molar mass (g/mol) | g/mol | 11.011 | 0.001
out n | Number of atoms | atoms | m / mm * 6.02214076e23 | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →