molecalculator

Moles & Molar Mass

Enthalpy of Formation of KCl: Value & Meaning

Calculator No. 01-7303 · Updated · Formula and assumptions shown below

Heat released 436.70 kJ
Heat per gram
5.8578 kJ/g
= 436.7 ÷ 74.55
Mass of KCl
74.55 g
Set in the form below
Amount of KCl
1 mol
Set in the form below
You enter
Mass of KCl (g), Amount of KCl (mol)
You get
Heat released (kJ), Heat per gram (kJ/g)
Rounding
2 dp · 4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The standard enthalpy of formation of potassium chloride (KCl) is −436.7 kJ/mol (solid, 25 °C, 1 bar). This means forming 1 mole of solid KCl from its elements in their standard states (potassium metal and chlorine gas) releases 436.7 kJ of heat. The negative sign confirms KCl formation is strongly exothermic.

Formula

The standard enthalpy of formation (ΔfH°) is defined by the reaction:

K(s) + ½ Cl2(g) → KCl(s)    ΔfH° = −436.7 kJ/mol

Here:

  • K(s) – solid potassium metal (standard state)
  • Cl2(g) – chlorine gas (standard state)
  • KCl(s) – solid potassium chloride (product)
  • ΔfH° – heat change per mole of KCl formed, at 298.15 K and 1 bar

The calculator above uses this value to compute the heat released when a given mass or amount of KCl is formed from its elements. The molar mass of KCl is 74.55 g/mol (K = 39.10, Cl = 35.45).

Worked Example

Using the default inputs: mass of KCl = 74.55 g and amount = 1 mol.

  1. Convert mass to moles: 74.55 g ÷ 74.55 g/mol = 1.000 mol
  2. Heat released = 1.000 mol × 436.7 kJ/mol = 436.7 kJ
  3. Heat per gram = 436.7 kJ ÷ 74.55 g = 5.858 kJ/g

The calculator shows 436.70 kJ and 5.8580 kJ/g, matching the manual calculation.

Assumptions

  • Standard conditions: 25 °C (298.15 K) and 1 bar pressure
  • KCl is in its most stable solid form (face-centered cubic crystal)
  • Elements are in their standard states: K(s) and Cl2(g)
  • The value is for the formation reaction, not for dissolution or other processes

Why Is the Value Negative?

The negative sign indicates an exothermic reaction – energy is released when ionic bonds form. Potassium (a highly reactive alkali metal) transfers its single valence electron to chlorine (a halogen), creating K⁺ and Cl⁻ ions. The electrostatic attraction between these oppositely charged ions releases a large amount of energy. This is why KCl is a stable, high-melting-point salt (mp 770 °C) rather than a reactive mixture of metal and gas.

For comparison, the enthalpy of formation of NaCl is −411.2 kJ/mol. KCl is slightly more exothermic because the potassium ion (larger radius) allows a more favorable lattice energy relative to the ionization energy and electron affinity steps in the Born–Haber cycle.

How It Is Measured

Enthalpies of formation are not measured directly by mixing potassium metal with chlorine gas – that reaction is dangerously violent. Instead, chemists use Hess’s law and calorimetry:

  • Measure the heat of solution of KCl in water (ΔHsol ≈ +17.2 kJ/mol, endothermic)
  • Measure the heat of formation of aqueous K⁺ and Cl⁻ ions from their elements
  • Combine these values thermodynamically to obtain the solid formation enthalpy

Modern reference tables (NIST, CRC Handbook) list −436.7 kJ/mol as the accepted value, with slight variations (−436.5 to −437.0) depending on the reference state and temperature.

Common Mistakes and Misconceptions

Confusing formation with dissolution. Dissolving KCl in water absorbs heat (the solution feels cold), but that is a different process. The formation enthalpy refers to making the solid from elements, not dissolving it in water.

Sign errors. A positive value would mean energy is required to form KCl, which is wrong – KCl is stable and its formation releases energy. Always check the sign: stable compounds formed from elements in their standard states usually have negative formation enthalpies.

Units. The value is per mole of KCl, not per gram or per mole of chlorine atoms. The reaction uses ½ mole of Cl2, but the enthalpy is still reported per mole of KCl product.

Temperature dependence. The value changes slightly with temperature. At 0 °C it is about −436.2 kJ/mol, at 100 °C about −437.5 kJ/mol. The standard value is always quoted at 25 °C.

Why It Matters in Practice

The formation enthalpy of KCl is used in:

  • Calculating reaction enthalpies via Hess’s law (e.g., KCl + AgNO₃ → AgCl + KNO₃)
  • Designing fertilizer production (KCl is the main potassium source)
  • Understanding lattice energy and ionic bonding in textbooks
  • Thermochemical modeling of salt mixtures and phase changes

For example, to find the enthalpy of the reaction KCl(s) → K⁺(aq) + Cl⁻(aq), you combine the formation enthalpy of KCl with the formation enthalpies of the aqueous ions. The result (+17.2 kJ/mol) matches calorimetric measurements of dissolution.

Safety and Handling

KCl itself is not hazardous in normal use, but the formation reaction involves potassium metal and chlorine gas – both extremely dangerous. Never attempt to synthesize KCl from its elements outside a controlled laboratory. In the lab, follow your institution’s safety data sheet (SDS) and supervisor’s instructions. KCl dust can irritate eyes and respiratory tract; use standard lab PPE (gloves, goggles).

Frequently Asked Questions

Is KCl formation endothermic or exothermic? Exothermic. The negative enthalpy of formation (−436.7 kJ/mol) means heat is released when potassium and chlorine combine. This is typical for ionic compounds.

Why does KCl dissolve in water but absorb heat? Dissolution is a different process from formation. The lattice energy holding KCl together is large, but the hydration energy of K⁺ and Cl⁻ ions is slightly smaller, so the net dissolution is endothermic (+17.2 kJ/mol). The solution cools because it pulls heat from the surroundings.

What is the difference between enthalpy of formation and enthalpy of reaction? Enthalpy of formation is a specific type of reaction enthalpy where the reactants are elements in their standard states and the product is exactly 1 mole of a compound. Enthalpy of reaction is a general term for any chemical reaction. Formation enthalpies are used as building blocks to calculate reaction enthalpies via Hess’s law.

How accurate is the −436.7 kJ/mol value? Very accurate. It is based on precise calorimetric measurements and has an uncertainty of about ±0.1 kJ/mol. Different reference tables may list −436.5 or −436.8 kJ/mol due to different standard pressures (1 atm vs 1 bar) or temperature calibrations, but the difference is negligible for most calculations.

Can I use this value for KCl in solution? No. The formation enthalpy of solid KCl is different from that of aqueous K⁺ and Cl⁻ ions. The standard enthalpy of formation of aqueous K⁺ is −252.4 kJ/mol and Cl⁻ is −167.2 kJ/mol. If you need the formation enthalpy of KCl(aq), sum those two ion values.

Does KCl have a higher formation enthalpy than NaCl? KCl (−436.7 kJ/mol) is more exothermic than NaCl (−411.2 kJ/mol). The difference arises from the balance between ionization energy, electron affinity, and lattice energy – potassium’s larger ionic radius reduces lattice energy, but the overall formation is still more favorable due to the lower ionization energy of potassium relative to sodium.

Related

Formula used
in m | Mass of KCl | g | 74.55 | 0
in n | Amount of KCl | mol | 1 | 0
out q | Heat released | kJ | n * 436.7 | 2
out qg | Heat per gram | kJ/g | 436.7 / 74.55 | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →