To convert Fahrenheit to Celsius, subtract 32 from the Fahrenheit temperature, then multiply by 5/9. The formula is °C = (°F − 32) × 5/9. For example, 68°F equals 20°C because (68 − 32) = 36, and 36 × 5/9 = 20.
Formula
The conversion formula is written as:
°C = (°F − 32) × 5/9
- °F – temperature in degrees Fahrenheit (input)
- °C – temperature in degrees Celsius (result)
- 32 – the freezing point of water in Fahrenheit (offset)
- 5/9 – the ratio of the size of one Celsius degree to one Fahrenheit degree
The same relationship can be rearranged to convert Celsius to Fahrenheit: °F = (°C × 9/5) + 32. Both forms come from the fact that water freezes at 32°F = 0°C and boils at 212°F = 100°C, giving a 180-degree span on the Fahrenheit scale and a 100-degree span on the Celsius scale.
Worked Example
Using the default value of 68°F from the calculator:
- Subtract 32: 68 − 32 = 36
- Multiply by 5/9: 36 × 5 = 180; 180 ÷ 9 = 20
- Result: 20°C
The calculator also shows the Kelvin equivalent: 20 + 273.15 = 293.15 K. This is useful in scientific work where absolute temperature is required.
Assumptions
- The formula assumes the standard definition of both scales (Fahrenheit and Celsius).
- No rounding is applied until the final result; intermediate steps are exact.
- The Kelvin conversion uses the exact offset 273.15, which is the difference between 0°C and absolute zero.
- The formula works for any temperature, including negative values, down to absolute zero (−459.67°F).
Why the Formula Works
The Fahrenheit and Celsius scales are both linear, meaning a straight-line relationship exists between them. Two reference points define each scale: the freezing and boiling points of water at standard atmospheric pressure. On the Celsius scale, these are 0°C and 100°C; on the Fahrenheit scale, they are 32°F and 212°F. The difference between the boiling and freezing points is 100 degrees on Celsius and 180 degrees on Fahrenheit. Therefore, one Celsius degree equals 180/100 = 9/5 Fahrenheit degrees, and one Fahrenheit degree equals 5/9 of a Celsius degree. The offset of 32°F accounts for the fact that the zero points differ.
How to Use the Calculator
Enter any Fahrenheit temperature in the input field. The calculator immediately shows the equivalent Celsius temperature (the main result) and the Kelvin temperature. The minimum allowed input is −459.67°F, which is absolute zero, the lowest physically possible temperature. You can enter decimals for precise values (e.g., 98.6°F for normal body temperature). The result is rounded to one decimal place for Celsius and Kelvin by default, which is adequate for most everyday and lab purposes.
Common Mistakes and Misconceptions
- Forgetting the subtraction: A frequent error is multiplying by 5/9 first and then subtracting 32. Always subtract 32 first because the formula is not distributive.
- Using 9/5 instead of 5/9: When converting Fahrenheit to Celsius, you multiply by 5/9 (smaller number). If you multiply by 9/5, you get a much larger number, which is wrong.
- Confusing the offset: The 32 is subtracted because 32°F corresponds to 0°C. If you are converting Celsius to Fahrenheit, you add 32 after multiplying by 9/5.
- Rounding too early: For precise work, keep extra digits until the final step. For example, 100°F converts to 37.777…°C, which rounds to 37.8°C.
- Assuming the formula is approximate: The relationship is exact by definition; it is not an approximation.
When to Use Fahrenheit vs. Celsius
Fahrenheit is still the standard for everyday weather and cooking in the United States, while Celsius is used in most other countries and in all scientific contexts. In the lab, Celsius (or Kelvin) is almost always used because it aligns with the metric system and simplifies calculations involving gas laws, heat capacity, and other physical chemistry equations. If you are following a recipe from the US, you may need to convert oven temperatures (e.g., 350°F = 176.7°C). In science, the Kelvin scale is preferred for absolute temperature because it starts at absolute zero and has no negative values.
Limitations of the Formula
The conversion formula is purely mathematical and works for any temperature. However, it does not account for the physical meaning of the temperature. For example, the same numerical conversion applies whether you are measuring air temperature, a chemical reaction temperature, or a metal’s melting point. The formula also does not consider pressure or other conditions; those affect the physical state of matter but not the conversion itself. For extremely precise measurements, you might need to account for the calibration of your thermometer, but the conversion formula itself is exact.
Frequently Asked Questions
What is 100°F in Celsius?
100°F is approximately 37.8°C. Using the formula: (100 − 32) = 68, then 68 × 5/9 = 37.777…, which rounds to 37.8°C. This is close to normal human body temperature (98.6°F = 37.0°C).
Is there a quick way to convert Fahrenheit to Celsius without a calculator?
A rough mental estimate is to subtract 30 and then halve the result. For example, 68°F − 30 = 38, then 38 ÷ 2 = 19°C, close to the exact 20°C. This shortcut works best for temperatures near room temperature but becomes less accurate at extremes.
What is the formula to convert Celsius to Fahrenheit?
The reverse formula is °F = (°C × 9/5) + 32. For example, 20°C × 9/5 = 36, plus 32 gives 68°F.
Why does the US still use Fahrenheit?
The US adopted Fahrenheit historically because it was the standard in the English-speaking world. The Celsius scale (originally centigrade) became the international standard through the metric system, but the US has not fully converted. Today, Fahrenheit remains for everyday use, while science and medicine in the US also use Celsius.
At what temperature are Fahrenheit and Celsius the same?
They are equal at −40 degrees. Setting °F = °C and solving the equation gives −40°C = −40°F. This is a common trivia question and a useful check for conversions.
Can the formula be used for Kelvin?
Kelvin is an absolute scale where 0 K is absolute zero. To convert from Fahrenheit to Kelvin, first convert to Celsius, then add 273.15. The calculator does this automatically. Kelvin is used in scientific contexts because it has no negative values.
Related
Formula used
in f | Temperature in Fahrenheit | °F | 68 | -459.67 out c | Temperature in Celsius | °C | (f - 32) * 5 / 9 | 1 out k | Temperature in Kelvin | K | c + 273.15 | 1
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Rate and Extent of Reaction: Key Facts0.050 mol/L
- How to Calculate Extent of Reaction0.800 mol
- Rate and Extent of Chemical Reactions0.1000 mol/(L·s)
- Chemical Reaction Formula: How to Write & Balance2.2722 mol
- Extent of Reaction Units: mol and Beyond
- Extent of Reaction Solver & How to Use It0.6000 mol