molecalculator

Moles & Molar Mass

Gallium Nitrate Molar Mass and Formula Calculator

Calculator No. 01-4712 · Updated · Formula and assumptions shown below

Mass of anhydrous gallium nitrate 2.5574 g
Molar mass of gallium nitrate
255.74 g/mol
= 69.723 + 3 × (14.007 + 3 × 15.999)
Amount of gallium nitrate
0.01 mol
Set in the form below
You enter
Amount of gallium nitrate (mol)
You get
Mass of anhydrous gallium nitrate (g), Molar mass of gallium nitrate (g/mol)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Gallium nitrate, Ga(NO3)3, has a molar mass of 255.74 g/mol when calculated using standard atomic weights. Enter the number of moles to calculate the corresponding mass in grams; the calculator uses anhydrous gallium nitrate, not a hydrate.

Formula

The molar mass is the sum of the atomic masses in the chemical formula. For gallium nitrate, Ga(NO3)3, the formula is:

M = Ar(Ga) + 3 × [Ar(N) + 3 × Ar(O)] = 69.723 + 3 × (14.007 + 3 × 15.999) = 255.741 g/mol

Here, M is molar mass in grams per mole (g/mol), and Ar is the relative atomic mass used as a numerical value in g/mol for this calculation. The subscripts and parentheses matter: one formula unit contains one gallium atom, three nitrogen atoms, and nine oxygen atoms. The calculator’s mass output uses m = n × M, where m is mass in grams and n is amount in moles. The input n must be zero or greater.

Worked Example

For the default input, n = 0.010 mol:

  1. Calculate the mass of one mole: M = 69.723 + 3 × (14.007 + 3 × 15.999).
  2. Calculate the nitrate contribution: 14.007 + 3 × 15.999 = 62.004 g/mol.
  3. Multiply that contribution by three and add gallium: M = 69.723 + 3 × 62.004 = 255.735 g/mol.
  4. Calculate the mass for the entered amount: m = 0.010 mol × 255.735 g/mol = 2.55735 g.

The calculator displays 2.5574 g and 255.74 g/mol, rounding to the specified decimal places. The unrounded formula value is 255.735 g/mol; the worked steps retain extra digits to show the arithmetic before display rounding.

Assumptions

  • The formula represents anhydrous gallium nitrate, Ga(NO3)3, with no waters of crystallization.
  • The formula mass uses the listed abridged standard atomic weights: Ga 69.723, N 14.007, and O 15.999.
  • The calculator reports a theoretical mass from amount and formula mass. It does not account for purity, moisture, weighing uncertainty, or material lost during handling.

What the Formula Says About Gallium Nitrate

Gallium nitrate is an ionic compound composed of gallium(III) ions and nitrate ions. The formula Ga(NO3)3 reflects charge balance: one Ga3+ ion pairs with three NO3− ions. The parentheses show that the entire nitrate group is repeated three times. This is why the atom count is Ga1N3O9, rather than one nitrogen and three oxygen atoms.

That distinction is a common source of incorrect answers. Counting only one nitrate group gives a much smaller, incorrect formula mass. When a polyatomic ion has a subscript outside parentheses, multiply every atom inside by that subscript before summing atomic masses.

Using the Calculator and Interpreting the Result

The calculator takes an amount in moles and returns the equivalent mass of anhydrous gallium nitrate. For example, 0.010 mol corresponds to about 2.5574 g under the stated formula and atomic-weight convention. The second result is the molar mass itself, which remains the same regardless of how many moles are entered.

  • Enter moles, not millimoles. Convert millimoles to moles by dividing by 1,000; for instance, 10 mmol is 0.010 mol.
  • To calculate moles from a known mass, rearrange the relation: n = m / M. For 2.5574 g, n is approximately 2.5574 / 255.735 = 0.01000 mol.
  • Keep units consistent. Multiplying mol by g/mol gives g; multiplying a mass directly by g/mol does not give the desired quantity.
  • Do not treat the displayed precision as a guarantee of practical weighing accuracy. The actual usable precision depends on the sample and measurement method.

The molar mass is a formula-based value, not a measurement of a particular sample. If a material contains water, impurities, or a different chemical form, its effective mass per mole of the intended substance may not match this calculation. For bench work, follow your lab method, the safety data sheet (SDS) and your supervisor.

Anhydrous Salt Versus Hydrate

A hydrate includes a defined number of water molecules in its crystal formula. If the material is a hydrate, its formula is written Ga(NO3)3·xH2O, where x is the number of waters per formula unit. Its molar mass is then 255.735 + x × 18.015 g/mol using the same atomic weights. For a hypothetical monohydrate, x = 1, giving 273.750 g/mol. This example illustrates the calculation; it does not assert that a particular commercial sample is a monohydrate.

Check the chemical name, formula, and hydration state provided for the material rather than assuming that every product is anhydrous. A mass calculated for the anhydrous formula will correspond to fewer moles of gallium nitrate if the weighed sample includes water or other material. The calculator does not infer hydration state or correct for purity.

Common Calculation Errors and Limits

Besides missing the parentheses, errors can come from confusing molar mass with molecular mass or from rounding each atomic contribution too early. Molar mass is expressed in g/mol and describes a mole of formula units. For an ionic compound such as gallium nitrate, “formula units” is more precise than “molecules.” The numerical value is built by adding the atomic weights according to the formula, then rounding the final result appropriately.

The calculator uses fixed standard atomic weights as a conventional reference. Natural isotopic composition can cause small variation in actual atomic mass, and sample purity or hydration can have larger practical effects. It is a stoichiometric calculation tool, not a determination of identity, purity, solubility, or safe handling conditions.

Frequently Asked Questions

What is the molar mass of Ga(NO3)3?
The calculated molar mass of anhydrous gallium nitrate is 255.735 g/mol, commonly reported as 255.74 g/mol using Ga 69.723, N 14.007, and O 15.999.

How many atoms are in one formula unit of gallium nitrate?
One formula unit has one gallium atom, three nitrogen atoms, and nine oxygen atoms, for 13 atoms total.

Why are there three nitrate groups?
Gallium(III) carries a 3+ charge, while each nitrate ion carries a 1− charge. Three nitrate ions balance one gallium(III) ion, giving Ga(NO3)3.

Is gallium nitrate the same as gallium nitrate hydrate?
No. A hydrate includes water in its solid formula and has a higher molar mass. Use the hydrate’s stated formula to calculate its value rather than using the anhydrous result.

How do I convert grams of gallium nitrate to moles?
Divide the mass in grams by 255.735 g/mol for anhydrous gallium nitrate. For example, 2.55735 g ÷ 255.735 g/mol = 0.01000 mol.

Related

Formula used
in n | Amount of gallium nitrate | mol | 0.010 | 0
out m | Mass of anhydrous gallium nitrate | g | n * (69.723 + 3 * (14.007 + 3 * 15.999)) | 4
out mm | Molar mass of gallium nitrate | g/mol | 69.723 + 3 * (14.007 + 3 * 15.999) | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →