The universal gas constant is R = 8.31446261815324 J/(mol·K), commonly rounded to 8.314 J/(mol·K). This calculator uses that value to convert a gas sample’s amount, pressure, volume, and temperature into the remaining quantity under the ideal gas law.
Formula
The ideal gas law is PV = nRT. Rearranged to calculate amount of gas, it is n = PV / (RT). In this calculator, P is absolute pressure in pascals (Pa), V is volume in cubic metres (m³), n is amount in moles (mol), T is absolute temperature in kelvins (K), and R = 8.31446261815324 J/(mol·K). The output “Pressure-volume product” is PV; because 1 Pa·m³ = 1 J, it is reported in joules.
The input for amount of gas is included as a reference value, while the first output calculates n from the entered pressure, volume, and temperature. The gas constant’s joule units are consistent with SI pressure and volume: Pa·m³ = J, and J divided by J/(mol·K) times K gives mol. Use absolute pressure and kelvins, not gauge pressure and degrees Celsius.
Worked Example
Using the default values P = 101325 Pa, V = 0.022414 m³, and T = 273.15 K:
- Calculate PV: 101325 Pa × 0.022414 m³ = 2271.792 J.
- Calculate RT: 8.31446261815324 J/(mol·K) × 273.15 K = 2271.0957 J/mol (rounded).
- Calculate n: 2271.792 J / 2271.0957 J/mol = 1.000306 mol, which rounds to 1.000306 mol at six decimal places.
The second output is PV = 2271.792 J, shown to three decimal places. The slight difference between the calculated amount and exactly 1 mol reflects the rounded default volume; the ideal molar volume at 273.15 K and 101325 Pa is about 0.02241397 m³/mol.
Assumptions
- The gas follows the ideal gas model: particles have negligible volume and intermolecular attractions are ignored.
- Pressure is absolute, temperature is in kelvins, and the gas sample is at a uniform equilibrium state.
- Volume is the gas’s volume, not a container’s nominal capacity if the gas occupies only part of it.
What the Gas Constant Means
The gas constant connects a gas’s macroscopic properties—pressure, volume, temperature, and amount—to one another. It is called universal because the same SI value applies to ideal-gas calculations for any gas when quantities are expressed in compatible units. It is not a different constant for oxygen, nitrogen, or carbon dioxide, although real gases can depart from ideal behavior in ways that depend on the substance and conditions.
R is related to the Boltzmann constant, kB, and Avogadro’s constant, NA, by R = NAkB. The Boltzmann constant describes thermal energy per particle per kelvin; the gas constant gives the corresponding energy per mole per kelvin. The joule is the SI unit of energy, so R’s SI units are J/(mol·K).
The value is exact in terms of the defined SI constants: R = 8.31446261815324 J/(mol·K) is the conventional decimal representation used here. In most classroom or hand calculations, 8.314 J/(mol·K) is sufficiently precise. Carrying many digits cannot compensate for uncertain measurements of pressure, volume, or temperature.
Why R Has Different Numerical Values
The physical constant does not change when the unit system changes; its numerical value does. Common equivalent forms include:
- 8.31446261815324 J/(mol·K), for SI energy, pressure, and volume units.
- 0.0820574 L·atm/(mol·K), when pressure is in atmospheres and volume is in litres.
- 0.0831446 L·bar/(mol·K), when pressure is in bars and volume is in litres.
These are unit conversions of the same constant, not competing scientific values. For example, 1 L·atm equals 101.325 J. If a calculation uses pressure in atmospheres and volume in litres, choose the L·atm form; if it uses pascals and cubic metres, use the joule form. Mixing one form of R with another form’s units produces an incorrect result, often by a large factor.
Using the Ideal Gas Law Correctly
Use PV = nRT when a gas can reasonably be treated as ideal and you know three of the four state variables. This calculator solves for n; the same equation can be rearranged to find pressure, volume, or temperature when the other values are known. Ensure that the variables describe the same sample at the same conditions.
Before calculating, check these points:
- Convert Celsius to kelvins by adding 273.15. For instance, 20 °C is 293.15 K. Do not enter a Celsius number directly as T.
- Use absolute pressure. Gauge pressure is measured relative to surrounding pressure; convert it by adding the local atmospheric pressure when appropriate.
- Convert litres to cubic metres using 1 L = 0.001 m³. Likewise, 1 mL = 0.000001 m³.
- Keep the number of significant figures consistent with the least precise measured input.
A common related question is whether R should be written in joules or litres-atmospheres. Choose based on the units in the equation, then convert inputs to match. Never insert the SI value 8.314 into a calculation using L and atm without converting units or changing R.
Limits and Common Sources of Error
The ideal gas law is often a good approximation at relatively low pressures and sufficiently high temperatures, but no single pressure or temperature cutoff works for every gas. Near condensation or at high pressure, molecular attractions and finite molecular size can make PV = nRT less accurate. More advanced equations of state account for such behavior; the appropriate model depends on the gas and the precision required.
Errors also arise from confusing amount with mass: n is measured in moles, not grams. To convert a gas mass to moles, divide mass in grams by its molar mass in g/mol before applying the gas law. Another frequent error is treating a measured gauge pressure as absolute pressure. At low pressures, that distinction can strongly affect the result. For real measurements, uncertainty in the inputs should be considered rather than implying that a long decimal output is exact.
This calculator is for general study and lab-planning arithmetic, not a substitute for a validated method. For bench work, follow your lab method, the safety data sheet (SDS), and your supervisor.
Frequently Asked Questions
What is the gas constant R in joules?
R = 8.31446261815324 J/(mol·K), usually rounded to 8.314 J/(mol·K).
Why is the unit of R joules per mole per kelvin?
In PV = nRT, pressure times volume has units of energy: Pa·m³ = J. Dividing that energy by moles and kelvins gives R in J/(mol·K).
Is the gas constant the same for every gas?
Yes. R is universal; differences between gases appear in how closely their actual behavior follows the ideal-gas model.
Can I use 8.314 with litres and atmospheres?
Not directly. Use R = 0.0820574 L·atm/(mol·K), or convert volume and pressure to m³ and Pa before using the SI value.
What is R in kJ/(mol·K)?
Divide the joule value by 1000: R = 0.00831446261815324 kJ/(mol·K), commonly written 0.008314 kJ/(mol·K).
Related
Formula used
in n | Amount of gas | mol | 1 | 0 in t | Temperature | K | 273.15 | 0 in p | Pressure | Pa | 101325 | 0 in v | Volume | m³ | 0.022414 | 0 out ncalc | Amount of gas | mol | p * v / (8.31446261815324 * t) | 6 out pv | Pressure-volume product | J | p * v | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s