The universal gas constant, R, is 8.31446261815324 J/(mol·K), equivalent to 0.0820574 L·atm/(mol·K) or 0.0831446 L·bar/(mol·K). This calculator converts a supplied R value between those three unit systems; enter the numerical value and select its current units to get the equivalent values in the other systems.
Formula
The calculator converts R using equivalent pressure-volume units. Let r be the numerical value entered, and let the selected unit system determine which conversion factor applies. The standard relationships are:
- 1 L·atm = 101.325 J
- 1 L·bar = 100 J
- Therefore, R in L·atm/(mol·K) = R in J/(mol·K) ÷ 101.325.
- R in L·bar/(mol·K) = R in J/(mol·K) ÷ 100.
The displayed formulas use the selector value u: 1 means J/(mol·K), 2 means L·atm/(mol·K), and 3 means L·bar/(mol·K). For example, the J-based output is r when u = 1, r × 101.325 when u = 2, or r × 100 when u = 3. The other outputs apply the corresponding inverse or cross-conversion. The constants are exact unit conversions: one atmosphere is 101.325 kPa, and one bar is 100 kPa; since 1 kPa·L = 1 J, the stated energy equivalents follow.
Worked Example
Use the default input r = 8.31446261815324 and select J/(mol·K), u = 1.
- R in J/(mol·K) = r = 8.31446261815324, displayed to 8 decimal places as 8.31446262.
- R in L·atm/(mol·K) = r ÷ 101.325 = 0.08205736608, displayed as 0.08205737.
- R in L·bar/(mol·K) = r ÷ 100 = 0.08314462618, displayed as 0.08314463.
These are alternative unit expressions of the same physical constant, not three different constants. In calculations, retain extra digits internally when possible; rounding the constant too early can affect the final result.
Assumptions
- The selected value represents the universal molar gas constant, not a substance-specific or mass-specific gas constant.
- Conversions use 1 L·atm = 101.325 J and 1 L·bar = 100 J.
- The calculator converts units only; it does not calculate pressure, volume, temperature, or amount of gas.
What R Means
The universal gas constant links pressure, volume, amount of substance, and absolute temperature in the ideal gas law:
PV = nRT
Here P is pressure, V is volume, n is amount in moles, T is thermodynamic temperature in kelvins, and R is the universal gas constant. R has units of energy per mole per kelvin. Its numerical value changes when the chosen pressure, volume, or energy units change, but its physical meaning does not.
R is also related to the Boltzmann constant, which applies per particle rather than per mole: R = NAkB, where NA is the Avogadro constant and kB is Boltzmann’s constant. This relation explains why the gas constant appears in formulas expressed per mole, while kB appears in formulas for individual molecules.
Which R Value Should You Use?
Choose the form of R that matches the units in the equation. The unit factors should cancel cleanly, leaving the units you want for the result. Common choices include:
- 8.31446261815324 J/(mol·K): use with pressure in pascals and volume in cubic metres, because Pa·m³ equals joules. It is also the natural form for energy-based thermodynamic equations.
- 0.0820574 L·atm/(mol·K): use when pressure is in atmospheres and volume is in litres.
- 0.0831446 L·bar/(mol·K): use when pressure is in bars and volume is in litres.
For example, in PV = nRT, using P in atm and V in L alongside R in J/(mol·K) mixes units and gives an invalid numerical result unless you convert pressure-volume to joules. Either convert P and V to SI units or choose the matching litre-atmosphere value.
Common Mistakes and Limits
The most frequent error is mixing unit systems: a correct R value cannot compensate for pressure entered in kPa when the equation expects atm, or volume entered in mL when it expects L. Convert every quantity or use a consistent set. Also use kelvins, not degrees Celsius, in gas-law equations; convert temperature with K = °C + 273.15.
Another common confusion is between R and a specific gas constant. The universal R is per mole and has units such as J/(mol·K). A specific gas constant is per unit mass and depends on the gas’s molar mass; it is not interchangeable with R without conversion. Likewise, the symbol R may be used differently in specialized equations, so check the definition and units given by the source.
The ideal gas law is an approximation. It is generally useful when gas particles are sufficiently far apart and intermolecular effects are small, but real gases can depart from ideal behavior, especially at high pressure or near condensation. Changing the numerical units of R does not correct those model limitations. Use an appropriate real-gas model when the required accuracy or conditions demand it.
Frequently Asked Questions
What is the value of the gas constant R?
The SI value is 8.31446261815324 J/(mol·K). Frequently used alternatives are 0.0820574 L·atm/(mol·K) and 0.0831446 L·bar/(mol·K).
Why does R have different values in different tables?
Tables may use different pressure, volume, or energy units, and may round to different numbers of digits. The values are equivalent when converted correctly.
Which value of R should I use for PV = nRT?
Match R to the pressure and volume units: use 0.0820574 with atm and L, 0.0831446 with bar and L, or 8.31446261815324 with SI-compatible units such as Pa and m³.
Is R the same as the Boltzmann constant?
No. The Boltzmann constant kB is energy per particle per kelvin; R is energy per mole per kelvin. They are related by R = NAkB.
Can I use Celsius in the ideal gas law?
No. Use absolute temperature in kelvins. Convert from Celsius by adding 273.15 before substituting the temperature.
Related
Formula used
in r | Numerical R value | selected units | 8.31446261815324 | 0 sel u | Input units | J/(mol·K)=1, L·atm/(mol·K)=2, L·bar/(mol·K)=3 out rj | R in J/(mol·K) | J/(mol·K) | r * (u = 1) + r * (u = 2) * 101.325 + r * (u = 3) * 100 | 8 out ratm | R in L·atm/(mol·K) | L·atm/(mol·K) | r * (u = 1) / 101.325 + r * (u = 2) + r * (u = 3) * 100 / 101.325 | 8 out rbar | R in L·bar/(mol·K) | L·bar/(mol·K) | r * (u = 1) / 100 + r * (u = 2) * 101.325 / 100 + r * (u = 3) | 8
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s