molecalculator

Moles & Molar Mass

Glucose Molecular Mass: Formula & Calculation

Calculator No. 01-9867 · Updated · Formula and assumptions shown below

Amount of glucose 0.1000 mol
Amount in millimoles
100.00 mmol
= Amount of glucose × 1000
Mass of glucose
18.0156 g
Set in the form below
Molar mass of glucose
180.156 g/mol
Set in the form below
You enter
Mass of glucose (g), Molar mass of glucose (g/mol)
You get
Amount of glucose (mol), Amount in millimoles (mmol)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Glucose has a molecular mass of approximately 180.156 g/mol. This value is calculated by summing the atomic masses of its constituent atoms: 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms. This article explains how to calculate this value, why it matters in chemistry and biology, and how to use it in laboratory calculations.

Formula

The molecular mass (also called molecular weight or molar mass) of a compound is the sum of the atomic masses of all atoms in its molecular formula. For glucose (C6H12O6):

Molar mass = (6 × atomic mass of C) + (12 × atomic mass of H) + (6 × atomic mass of O)

  • Carbon (C): atomic mass = 12.011 g/mol
  • Hydrogen (H): atomic mass = 1.008 g/mol
  • Oxygen (O): atomic mass = 15.999 g/mol

Plugging in the values:

Molar mass = (6 × 12.011) + (12 × 1.008) + (6 × 15.999) = 72.066 + 12.096 + 95.994 = 180.156 g/mol

Worked Example

Suppose you have 18.0156 g of glucose (exactly one-tenth of a mole). How many moles is that?

Using the formula: n = m / M = 18.0156 g / 180.156 g/mol = 0.1000 mol (or 100.0 mmol).

The calculator above gives the same result: 0.1000 mol, or 100.00 mmol.

Assumptions

  • The atomic masses used are the IUPAC standard atomic weights (abridged) – these are averages reflecting natural isotopic abundance.
  • The compound is pure, anhydrous glucose (no water of crystallization).
  • The molar mass is independent of temperature and pressure.

Why Molecular Mass Matters

Knowing the molecular mass of glucose is essential for preparing solutions of known concentration. For example, to make a 1 M glucose solution, you dissolve 180.156 g of glucose in water and bring the final volume to 1 L. In biological experiments, glucose is often used in mM concentrations (e.g., 5 mM in cell culture media), which requires weighing out 0.9008 g per liter.

In clinical chemistry, blood glucose levels are reported in mg/dL or mmol/L. A normal fasting blood glucose is around 70–100 mg/dL, which converts to 3.9–5.6 mmol/L (divide by 18.016). This conversion relies directly on the molar mass.

How to Use the Calculator

Enter the mass of glucose in grams (or any unit, as long as you adjust the molar mass accordingly) and the molar mass (default 180.156 g/mol). The calculator returns the amount in moles and millimoles. This is useful for:

  • Preparing stock solutions for lab work.
  • Converting between mass and moles in stoichiometry.
  • Checking the concentration of a solution you made.

For example, if you weigh out 9.0078 g of glucose, the calculator tells you that is 0.0500 mol (50 mmol).

Common Mistakes and Misconceptions

  • Using the wrong atomic mass: Some sources use 12 for carbon, 1 for hydrogen, and 16 for oxygen, giving 180 exactly. That is a rough approximation, but for precise work use the IUPAC values (12.011, 1.008, 15.999) to get 180.156.
  • Confusing molecular mass with molar mass: They are numerically identical (in g/mol vs. amu), but molecular mass is the mass of one molecule, while molar mass is the mass of one mole of molecules.
  • Forgetting the water in glucose monohydrate: Glucose can exist as a monohydrate (C6H12O6·H2O, MW = 198.17). If you use the anhydrous value for a hydrated sample, your concentration will be off by about 10%.
  • Rounding too early: In multi-step calculations, rounding intermediate values can introduce errors. Keep at least 4 significant figures until the final answer.

Related Substances: Fructose and Galactose

Glucose, fructose, and galactose all have the same molecular formula (C6H12O6), so they share the same molar mass of 180.156 g/mol. They are isomers – same atoms, different arrangement. This is why a solution of 1 M glucose and 1 M fructose have the same concentration in moles, even though they taste different and are metabolized differently.

When glucose forms disaccharides like sucrose (table sugar, C12H22O11), the molar mass becomes 342.30 g/mol (the sum of glucose and fructose minus water). This is important when preparing sugar solutions for fermentation or food science.

Limits of the Molar Mass Value

The value 180.156 g/mol is an average because carbon, hydrogen, and oxygen have multiple stable isotopes. For most laboratory work, this precision is more than sufficient. However, in mass spectrometry, you might see the exact mass of the most abundant isotopologue, which is 180.0634 u (for the 12C61H1216O6 molecule). The difference arises because atomic masses are weighted averages, not the mass of a single isotope.

Frequently Asked Questions

Is glucose molecular mass 180 or 180.16?

Both are correct depending on the level of precision. 180 g/mol is a rounded value often used in quick calculations, while 180.16 g/mol (more precisely 180.156) is the standard IUPAC-based value. For precise lab work, use 180.156.

How do I convert blood glucose from mg/dL to mmol/L?

Divide the value in mg/dL by 18.016 (which is 180.16 g/mol divided by 10). For example, 90 mg/dL ÷ 18.016 = 4.99 mmol/L. This conversion is standard in clinical chemistry.

What is the molar mass of glucose monohydrate?

Glucose monohydrate (C6H12O6·H2O) has a molar mass of 198.17 g/mol (180.156 + 18.015). If you use anhydrous glucose in a recipe that calls for monohydrate, you will need less mass.

Why do some sources say glucose has a molecular weight of 180.16 and others 180.156?

It’s due to rounding of atomic weights. Using 12.01, 1.008, and 16.00 gives 180.16. Using the full IUPAC values (12.011, 1.008, 15.999) gives 180.156. The difference is negligible for most purposes.

How many moles are in 1 gram of glucose?

Divide 1 g by 180.156 g/mol, which equals 0.005551 moles (or 5.551 mmol). This is useful for calculating the energy content: 1 mole of glucose yields about 2870 kJ when oxidized, so 1 g yields about 15.9 kJ.

Does glucose have the same molar mass as fructose?

Yes, because they share the same molecular formula C6H12O6. They are structural isomers, so their molar masses are identical at 180.156 g/mol.

Related

Formula used
in m | Mass of glucose | g | 18.0156 | 0
in mm | Molar mass of glucose | g/mol | 180.156 | 0.001
out n | Amount of glucose | mol | m / mm | 4
out nmmol | Amount in millimoles | mmol | n * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →