molecalculator

Moles & Molar Mass

Greenhouse Grade Potassium Nitrate: Uses & Rates

Calculator No. 01-13446 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Greenhouse grade potassium nitrate is a highly water-soluble fertilizer supplying nitrogen (N) and potassium (K) in a 13-0-46 ratio, used mainly for fertigation and foliar feeding of high-value crops. You enter the target concentration and your tank volume, and the calculator below tells you exactly how many grams of potassium nitrate to dissolve.

Formula

The molarity (M) of a potassium nitrate solution is calculated as:

M = m / (MM × V)

  • m = mass of potassium nitrate (g)
  • MM = molar mass of potassium nitrate (g/mol), 101.10 g/mol for KNO₃
  • V = final solution volume (L), so mL must be divided by 1000

The result is in mol/L (molarity). Multiply by 1000 to get millimolar (mM).

Worked Example

Using the defaults: dissolve 2.922 g of KNO₃ (MM = 101.10 g/mol) in enough water to make 250 mL final volume.

  1. Convert volume to liters: 250 mL ÷ 1000 = 0.250 L
  2. Calculate moles: 2.922 g ÷ 101.10 g/mol = 0.02890 mol
  3. Divide by volume: 0.02890 mol ÷ 0.250 L = 0.1156 mol/L
  4. Convert to mM: 0.1156 × 1000 = 115.6 mM

The calculator shows 0.1156 mol/L (115.6 mM).

Assumptions

  • The salt is pure KNO₃ (no added anti-caking agents that affect mass).
  • Volume is final solution volume, not the volume of water added.
  • Complete dissolution and no significant volume change on mixing.
  • Temperature is near 25 °C; molarity changes slightly with temperature.

What Makes It “Greenhouse Grade”?

Greenhouse grade (also called technical or soluble grade) potassium nitrate is refined to have very low levels of chloride, sodium, and heavy metals. Typical specifications include:

  • N-P₂O₅-K₂O analysis: 13-0-46 (13% N, 0% P, 46% K₂O)
  • Chloride content less than 0.02% (often ≤ 0.01%)
  • Water-insoluble matter less than 0.1%
  • Free-flowing, often prilled or crystalline, designed for rapid dissolution

This purity prevents clogging in drip emitters and avoids chloride toxicity in sensitive crops like lettuce, strawberries, and tomatoes.

How to Use It in Fertigation

Potassium nitrate is commonly used in two ways:

  1. Base nutrient solution: Add to the main fertilizer tank along with calcium nitrate, magnesium sulfate, and micronutrients. Typical rates range from 50 to 200 g per 100 L of irrigation water, depending on crop stage.
  2. Foliar spray: Dissolve 0.5–2% (5–20 g/L) and spray on leaves to correct potassium deficiency or to boost fruit quality during ripening.

Always do a jar test first: mix the stock solution and check for precipitation. Do not mix concentrated potassium nitrate with calcium nitrate in the same stock tank because calcium nitrate and potassium nitrate are compatible, but if you add other calcium sources, calcium sulfate or calcium phosphate may precipitate.

Common Problems and Misconceptions

A frequent mistake is using the “13-0-46” ratio incorrectly. The 46% is K₂O equivalent, not elemental potassium. To convert: 1 g of KNO₃ provides about 0.13 g of N and 0.38 g of K₂O (or 0.32 g of actual K). Another error is ignoring the nitrogen contribution when calculating total N; potassium nitrate supplies nitrate-N, which is immediately available but also leaches easily. Also, do not confuse greenhouse grade with agricultural grade—agricultural KNO₃ may contain more chloride and is cheaper but can harm sensitive crops.

Another misconception: “potassium nitrate is a complete fertilizer.” It lacks phosphorus and many micronutrients, so it is only a source of N and K.

How to Choose the Right Grade

Check the label for:

  • Chloride (Cl) content: < 0.1% for greenhouse grade
  • Sodium (Na) content: ideally < 0.05%
  • Solubility: should dissolve completely in cold water (about 316 g/L at 20 °C)
  • Particle size: fine crystals for rapid dissolution, prills for slow release in dry applications

If you are using drip irrigation, choose a product that does not contain anti-caking agents that can clog emitters.

Cost and Alternatives

Greenhouse grade KNO₃ is more expensive than agricultural grade—often 2–3 times the price per kg. However, the higher purity reduces clogging and crop damage, so the cost is justified for high-value crops. Alternatives include:

  • Potassium sulfate (0-0-50) – no nitrogen, good for chloride-sensitive crops but less soluble
  • Potassium chloride (0-0-60) – cheap but high chloride, not for sensitive crops
  • Mono-potassium phosphate (0-52-34) – supplies P and K, but no N
  • Other nitrate sources like calcium nitrate (15.5-0-0) – supplies N and calcium, but no K

For organic systems, potassium nitrate is synthetic but is allowed in some organic standards; check your certifier.

Safety and Handling

Potassium nitrate is an oxidizer. Keep it away from organic materials, acids, and reducing agents. Store in a cool, dry, well-ventilated area. Wear gloves and safety glasses when handling concentrated solutions. If you spill it, sweep up and dissolve in water, then dispose according to local regulations. Follow your lab method, the safety data sheet (SDS) and your supervisor. Never mix potassium nitrate with ammonium sulfate or urea in a closed container—heat can cause decomposition.

Frequently Asked Questions

How many grams of KNO₃ per liter for a 100 ppm N solution?
100 ppm N = 100 mg N/L. Since KNO₃ is 13% N, divide 100 mg by 0.13 = 769 mg/L, or 0.77 g/L. This also gives about 0.36 g/L of K (as K₂O).

Can I use potassium nitrate in hydroponics?
Yes, it is a standard ingredient in hydroponic nutrient solutions. It provides nitrate-N and potassium without chloride. Typical concentrations are 100–200 ppm N and 150–300 ppm K, depending on crop.

What is the difference between potassium nitrate and calcium nitrate?
Potassium nitrate supplies N and K; calcium nitrate supplies N and Ca. They are often used together in fertigation recipes, but they should be injected separately to avoid precipitation if the water has high sulfate or phosphate.

Is potassium nitrate organic?
Naturally occurring potassium nitrate (saltpeter) is allowed in some organic programs, but the commercial greenhouse grade is synthetically produced. Check with your organic certifier before use.

Why does my KNO₃ solution turn yellow?
Yellowing can be due to iron contamination or degradation of the product. High-purity greenhouse grade should remain colorless. If it turns yellow, it may be old or contaminated; test a fresh batch.

How do I store leftover potassium nitrate solution?
Store in a sealed container away from light and heat. It is stable for months if kept clean. Discard if you see mold or precipitate.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →