The molar mass of potassium nitrite (KNO2) is 85.103 g/mol. This value is calculated by summing the standard atomic weights of its constituent atoms: potassium (K, 39.098 g/mol), nitrogen (N, 14.007 g/mol), and two oxygen atoms (2 × 15.999 g/mol). This figure is essential for converting between mass and moles in stoichiometry, solution preparation, and other chemical calculations.
Formula
The molar mass (M) of a compound is the sum of the atomic masses of each element multiplied by the number of atoms of that element in the formula. For KNO2:
M(KNO2) = M(K) + M(N) + 2 × M(O)
Where:
- M(K) = 39.098 g/mol (potassium)
- M(N) = 14.007 g/mol (nitrogen)
- M(O) = 15.999 g/mol (oxygen)
Thus, M(KNO2) = 39.098 + 14.007 + 2(15.999) = 85.103 g/mol.
Worked Example
Suppose you need to prepare 250 mL of a 0.1373 mol/L solution of KNO2 (a typical concentration for a lab experiment). Using the molar mass of 85.103 g/mol, how many grams of solute do you need?
First, convert volume to liters: 250 mL = 0.250 L.
Use the molarity equation: moles = molarity × volume (in L).
moles = 0.1373 mol/L × 0.250 L = 0.034325 mol.
Now convert moles to grams: mass = moles × molar mass.
mass = 0.034325 mol × 85.103 g/mol = 2.922 g (rounded to three decimal places).
So, you would weigh out 2.922 g of KNO2 and dissolve it in enough water to make 250 mL of solution. This matches the default values in the calculator above.
Assumptions
- The atomic weights used are the IUPAC standard atomic weights (abridged) for naturally occurring elements.
- The compound is pure, anhydrous potassium nitrite (no water of hydration).
- The solution is prepared by dissolving the solute in a final volume of 250 mL, not by adding 250 mL of solvent to the solute.
- The molarity calculation assumes complete dissolution and ideal behavior (no volume change on mixing).
Background: What is KNO₂?
Potassium nitrite is an inorganic salt with the chemical formula KNO2. It appears as a white to slightly yellow crystalline powder and is highly soluble in water. It is used in food preservation (as E249), in the production of dyes and pigments, and as a corrosion inhibitor. In the lab, it is a common reagent for diazotization reactions and as a source of nitrite ions. Understanding its molar mass is fundamental for any quantitative work involving this compound.
How to Calculate Molar Mass (Step-by-Step)
If you need to calculate the molar mass of any compound, follow these steps:
- Write down the chemical formula (e.g., KNO2).
- Look up the atomic mass of each element from a reliable source (e.g., periodic table). For K: 39.098, N: 14.007, O: 15.999.
- Multiply each atomic mass by the number of atoms of that element in the formula. For KNO2: K × 1, N × 1, O × 2.
- Add all the resulting values together.
- The sum is the molar mass in grams per mole (g/mol).
For KNO2, the calculation is: 39.098 + 14.007 + (2 × 15.999) = 85.103 g/mol.
Why Molar Mass Matters in Lab Work
Molar mass is the bridge between the mass of a substance and the number of moles, which is the fundamental unit for chemical reactions. When you prepare a solution of a known molarity, you need to weigh out the correct mass of solute. For example, to make 1 L of a 1 M solution of KNO2, you would need 85.103 g of the salt. Without the molar mass, you cannot convert between grams and moles, making stoichiometric calculations impossible. The calculator above helps you quickly find the mass needed for any desired concentration and volume.
Common Mistakes and How to Avoid Them
- Forgetting to multiply by the subscript: In KNO2, there are two oxygen atoms. A common error is using 15.999 instead of 31.998 for the oxygen contribution.
- Using the wrong atomic mass: Always use the most recent IUPAC standard atomic weights. For example, nitrogen is 14.007, not 14.0067 (though close, the difference can matter in precise work).
- Unit confusion: Molar mass is in g/mol, not g or amu. When using the calculator, ensure your mass is in grams and volume in milliliters.
- Volume vs. solvent volume: When preparing a solution, you should dissolve the solute in a portion of solvent, then add solvent to reach the final volume. Adding solvent to a fixed mass without adjusting to the final volume gives an inaccurate concentration.
Frequently Asked Questions
What is the molar mass of KNO₂ in g/mol?
The molar mass is 85.103 g/mol. This is the sum of the atomic masses of potassium (39.098), nitrogen (14.007), and two oxygen atoms (31.998).
How do you convert from grams of KNO₂ to moles?
Divide the mass in grams by the molar mass (85.103 g/mol). For example, 10 g of KNO2 is equal to 10 ÷ 85.103 = 0.1175 mol.
Is potassium nitrite the same as potassium nitrate?
No. Potassium nitrate (KNO3) has one more oxygen atom. Its molar mass is 101.103 g/mol. The two compounds have different properties and uses; do not substitute one for the other without checking the intended application.
What is the percent composition of KNO₂?
Potassium: (39.098 / 85.103) × 100 = 45.94%. Nitrogen: (14.007 / 85.103) × 100 = 16.46%. Oxygen: (31.998 / 85.103) × 100 = 37.60%. These sum to 100%.
Why do I need to know the molar mass for making a solution?
Molarity is defined as moles of solute per liter of solution. To achieve a specific molarity, you must weigh out the correct number of moles, which requires converting from moles to grams using the molar mass. For example, to make 500 mL of 0.5 M KNO2, you need 0.25 mol × 85.103 g/mol = 21.28 g.
Safety and Handling
Potassium nitrite is an oxidizing agent and can be harmful if ingested or inhaled. Always handle it in a well-ventilated area, wear appropriate personal protective equipment (gloves, safety goggles), and avoid contact with skin and eyes. Store it in a cool, dry place away from reducing agents and combustible materials. Follow your lab method, the safety data sheet (SDS) and your supervisor for specific handling and disposal instructions.
Related
Formula used
in m | Mass of solute | g | 2.922 | 0 in mm | Molar mass | g/mol | 85.103 | 0.001 in v | Final solution volume | mL | 250 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Calcium Nitrate Boiling Point
- Cation Formula for Magnesium Nitrate0.0788 mol/L
- Potassium Nitrate Solubility in Water: Full Data25.9 g/100 mL
- Greenhouse Grade Potassium Nitrate: Uses & Rates0.2000 mol/L
- Potassium Nitride Formula & How to Write It
- Aqueous Ammonium Nitrate Formula0.3998 mol/L