Half-life kinetics describes how quickly a substance decays or is eliminated, defined as the time required for half of the initial amount to disappear. You enter the initial amount, the rate constant (or half-life itself), and the elapsed time, and the calculator returns the remaining amount for a first-order process. This page focuses on the first-order kinetics that apply to radioactive decay, many chemical reactions, and drug elimination from the body.
Formula
The first-order half-life equation is:
N(t) = N₀ × (1/2)^(t / t₁/₂)
- N(t) – amount remaining after time t (mol, g, or any count unit)
- N₀ – initial amount (same unit as N(t))
- t – elapsed time (s, min, h, etc.)
- t₁/₂ – half-life, the time for half the substance to decay (same time unit as t)
The rate constant k for a first-order process is related to the half-life by:
k = ln(2) / t₁/₂
Here ln(2) ≈ 0.6931. The units of k are inverse time (e.g., s⁻¹, h⁻¹).
Worked Example
Suppose you start with 100 mol of a radioactive isotope with a half-life of 5 hours. How much remains after 10 hours?
- Identify values: N₀ = 100 mol, t = 10 h, t₁/₂ = 5 h.
- Compute the exponent: t / t₁/₂ = 10 / 5 = 2.
- Apply the formula: N(10) = 100 × (1/2)² = 100 × 0.25 = 25 mol.
- Fraction remaining = 0.25 (25%).
- Rate constant k = ln(2) / 5 h ≈ 0.1386 h⁻¹.
The calculator gives the same result: 25.0000 mol.
Assumptions
- The process is first-order: the rate of decay is proportional to the amount present.
- The half-life is constant over time (not dependent on concentration or amount).
- No other processes (e.g., production, additional decay pathways) are occurring.
- For chemical reactions, this assumes a single reactant or an excess of others so the reaction is effectively first-order.
What Is Half-Life Kinetics?
Half-life kinetics is a way to describe exponential decay processes. In a first-order reaction, the time to reduce the amount by half is always the same, regardless of how much you start with. This is why half-life is a convenient, concentration-independent parameter. It is used in nuclear physics (radioactive decay), pharmacology (drug clearance), environmental science (pollutant degradation), and even in carbon dating.
How to Use the Calculator
Enter the initial amount (any unit, as long as you are consistent), the elapsed time, and the half-life. The calculator returns the remaining amount, the fraction remaining, and the rate constant. Make sure the time units for elapsed time and half-life match (both hours, both days, etc.). The calculator assumes first-order kinetics, which is the most common scenario for decay and elimination.
Common Mistakes and Misconceptions
- Using the wrong order: Zero-order reactions have a constant rate, and their half-life depends on the initial concentration. The formula here is only for first-order.
- Mismatched time units: If half-life is in days and elapsed time in hours, the result is wrong. Convert first.
- Confusing half-life with rate constant: They are inversely related, not equal. k = ln(2)/t₁/₂.
- Thinking half-life is additive: After two half-lives, 25% remains, not 0%. The decay is exponential, not linear.
- Rounding too early: Rounding the fraction to 0.5 before raising to a power can introduce errors. Keep more digits in intermediate steps.
Real-World Examples
- Radioactive decay: Carbon-14 has a half-life of about 5,730 years. A sample with 1 g of C-14 will have 0.5 g after 5,730 years, 0.25 g after 11,460 years, etc.
- Drug elimination: If a drug has a half-life of 4 hours, after 8 hours (two half-lives) the concentration in the body is 25% of the initial dose.
- Chemical reactions: The decomposition of hydrogen peroxide (2H₂O₂ → 2H₂O + O₂) is first-order under certain conditions, with a half-life that depends on temperature and catalysts.
Limits of the Model
The first-order half-life model assumes a single, well-defined decay process. In reality, many systems are more complex:
- Multi-compartment kinetics: In pharmacology, drug distribution can involve two or more half-lives (e.g., distribution phase and elimination phase).
- Environmental factors: Temperature, pH, and presence of catalysts can change the half-life of a chemical in the environment.
- Concentration dependence: Some reactions are second-order or zero-order, where half-life varies with concentration.
- Mixed decay chains: A radioactive sample may contain multiple isotopes, each with its own half-life, making the overall decay curve a sum of exponentials.
For study and lab planning, always verify the order of the reaction from your data or literature. Follow your lab method, the safety data sheet (SDS) and your supervisor.
Frequently Asked Questions
What is the difference between half-life and rate constant? The rate constant k measures the speed of a first-order reaction (units of 1/time). Half-life t₁/₂ is the time for half the material to react. They are related by t₁/₂ = ln(2)/k. A larger k means a shorter half-life.
Can half-life be used for any reaction order? No. The concept of a constant half-life applies only to first-order kinetics. For zero-order reactions, half-life increases with initial concentration; for second-order, half-life decreases with increasing concentration. The formula N(t) = N₀(1/2)^(t/t₁/₂) is only valid for first-order.
How do I convert between half-life and rate constant? Use k = ln(2)/t₁/₂. For example, if t₁/₂ = 5 h, then k = 0.6931/5 = 0.1386 h⁻¹. To get the half-life from k, t₁/₂ = ln(2)/k.
What does a half-life of 0 mean? A half-life of zero would imply instantaneous decay, which is physically impossible. The calculator sets a minimum of 0.000001 to avoid division by zero. In practice, half-lives are always positive.
Why is the fraction remaining not exactly 50% after one half-life? It is exactly 50% by definition. The calculator uses the exact formula, so for t = t₁/₂, the fraction is 0.5. Rounding in the display may show 0.5000, but the underlying value is precise.
Related
Formula used
in n0 | Initial amount | mol | 100 | 0 in t | Elapsed time | h | 10 | 0 in th | Half-life | h | 5 | 0.000001 out n | Remaining amount | mol | n0 * 0.5^(t / th) | 4 out frac | Fraction remaining | - | 0.5^(t / th) | 4 out k | Rate constant | 1/h | ln(2) / th | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Normality to g/L Converter & Formula29.220 g/L
- Normality to meq/mL Conversion Calculator1.0000 meq/mL
- Normality Test Q-Q Plot: How to Read It
- Normality Test Results: How to Analyze Them
- Normality Slay the Spire?
- Normality Test for Paired t Test: How to Check