molecalculator

Moles & Molar Mass

Uranium Half-Life: Key Isotopes Explained

Calculator No. 01-8388 · Updated · Formula and assumptions shown below

Number of atoms remaining 2.529 × 1024 atoms
Fraction remaining
0.999845
= 0.5^(Elapsed time ÷ Half-life)
Activity
12,436,254.7000 decays/s
Result, rounded to 4 decimal places
Mass of uranium sample
1000 g
Set in the form below
You enter
Mass of uranium sample (g), Molar mass of isotope (g/mol), Half-life (years), Elapsed time (years)
You get
Number of atoms remaining (atoms), Fraction remaining, Activity (decays/s)
Rounding
4 dp · 6 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Uranium’s half-life is the time it takes for half of a given sample of a uranium isotope to decay into another element. The most common isotope, uranium-238, has a half-life of about 4.468 billion years, while uranium-235 has a half-life of about 703.8 million years. These extremely long half-lives are why uranium is still present on Earth in significant amounts, and they underpin both radiometric dating and the use of uranium in nuclear reactors.

Formula

The radioactive decay law describes how the number of atoms in a sample decreases over time:

N(t) = N₀ × (1/2)^(t / t₁/₂)

Where:

  • N(t) = number of atoms remaining after time t
  • N₀ = initial number of atoms (calculated from mass and molar mass)
  • t = elapsed time (in the same units as the half-life)
  • t₁/₂ = half-life (years for uranium isotopes)

The initial number of atoms is N₀ = (mass / molar mass) × Avogadro’s number (6.02214076 × 10²³ mol⁻¹). The activity (decays per second) is A = λN, where λ = ln(2) / t₁/₂. To convert years to seconds, use 1 year = 3.15576 × 10⁷ seconds.

Worked Example

Using the default values: a 1000 g sample of uranium-238 (molar mass 238.05078826 g/mol, half-life 4.468 × 10⁹ years) after 1,000,000 years.

1. Initial atoms: N₀ = (1000 / 238.05078826) × 6.02214076 × 10²³ = 2.529 × 10²⁴ atoms.

2. Fraction remaining: (1/2)^(1×10⁶ / 4.468×10⁹) = 0.5^(0.0002238) ≈ 0.999845.

3. Atoms remaining: 2.529 × 10²⁴ × 0.999845 ≈ 2.528 × 10²⁴ atoms.

4. Activity: λ = ln(2) / (4.468×10⁹ × 3.15576×10⁷) = 4.916 × 10⁻¹⁸ s⁻¹. Activity = 4.916 × 10⁻¹⁸ × 2.529 × 10²⁴ ≈ 1.243 × 10⁷ decays/s (12.43 MBq).

So after one million years, the sample has lost only about 0.015% of its atoms, and it emits about 12.4 million alpha particles per second.

Assumptions

  • Pure isotope sample (no other uranium isotopes present).
  • No decay chains considered; the activity is only from the parent isotope.
  • Half-life is constant (true for all known radioactive isotopes).
  • Mass is measured in grams, time in years (converted to seconds for activity).

Why Uranium’s Half-Life Is So Long

Uranium-238’s half-life of 4.468 billion years is comparable to the age of the Earth (about 4.54 billion years). This means that since the Earth formed, roughly half of the original uranium-238 has decayed. Uranium-235, with a half-life of 703.8 million years, has decayed much more: only about 1/64 of the original amount remains today. This is why natural uranium is over 99% uranium-238 and less than 1% uranium-235. The long half-life is a consequence of quantum tunneling: the alpha particle must escape the strong nuclear force, and the probability of tunneling is extremely low for these heavy nuclei.

Uranium-238 vs. Uranium-235: Half-Life Comparison

Here are the key differences:

  • Uranium-238: Half-life 4.468 × 10⁹ years, alpha decay to thorium-234. Makes up about 99.27% of natural uranium.
  • Uranium-235: Half-life 7.038 × 10⁸ years, alpha decay to thorium-231. Makes up about 0.72% of natural uranium. It is fissile, meaning it can sustain a nuclear chain reaction.
  • Uranium-234: Half-life 2.455 × 10⁵ years, alpha decay to thorium-230. Present in trace amounts (about 0.0055%) as a decay product of uranium-238.

The difference in half-life is why enrichment is necessary: to increase the proportion of uranium-235 from 0.7% to about 3-5% for most nuclear reactors.

How Half-Life Is Used in Radiometric Dating

Uranium-lead dating is one of the most reliable methods for dating rocks. It relies on the decay of uranium-238 to lead-206 (half-life 4.468 billion years) and uranium-235 to lead-207 (half-life 703.8 million years). By measuring the ratio of uranium to lead in a mineral like zircon, scientists can calculate the age of the rock. Because the two isotopes decay at different rates, the ratio of lead-207 to lead-206 provides a cross-check. This method has dated the oldest rocks on Earth at about 4.4 billion years and meteorites at 4.56 billion years.

Common Misconceptions About Half-Life

A frequent mistake is thinking that half-life means the time for a sample to be completely gone. After one half-life, 50% remains; after two, 25%; after three, 12.5%, and so on. It never truly reaches zero. Another misconception is that half-life depends on temperature, pressure, or chemical state. In reality, half-life is a nuclear property and is essentially constant under all normal conditions. Only extreme conditions, such as inside a supernova or in highly ionized atoms, can slightly alter decay rates.

Frequently Asked Questions

What is the half-life of uranium-235?

Uranium-235 has a half-life of 703.8 million years (7.038 × 10⁸ years). It decays by alpha emission to thorium-231. This is the isotope used in nuclear reactors and weapons because it can sustain a chain reaction.

How much uranium-238 is left after 1 billion years?

Using the formula: fraction remaining = 0.5^(1×10⁹ / 4.468×10⁹) ≈ 0.856. So about 85.6% of the original uranium-238 remains after one billion years. That’s why it’s still abundant on Earth.

Why is uranium’s half-life so long compared to other radioactive elements?

The half-life is determined by the balance between the strong nuclear force (which holds the nucleus together) and the electrostatic repulsion between protons. Uranium-238 is just barely stable enough that alpha emission is extremely slow. The probability of an alpha particle tunneling through the nuclear barrier is very low, leading to a half-life of billions of years.

Does uranium half-life change with temperature or pressure?

No. For all practical purposes, the half-life of uranium is constant. Changes in temperature, pressure, or chemical bonding have no measurable effect on the decay rate. This constancy is what makes radiometric dating reliable.

What is the half-life of uranium-238 in seconds?

4.468 × 10⁹ years × 3.15576 × 10⁷ seconds/year ≈ 1.41 × 10¹⁷ seconds. This is useful for calculating activity in becquerels (decays per second).

How is the half-life of uranium measured if it’s so long?

Scientists measure the decay rate (activity) of a known mass of uranium and use the equation A = λN to find λ, then t₁/₂ = ln(2)/λ. For uranium-238, the activity of 1 gram is about 12,400 decays per second, which gives the 4.468 billion year half-life.

Related

Formula used
in m | Mass of uranium sample | g | 1000 | 0
in mm | Molar mass of isotope | g/mol | 238.05078826 | 0.001
in hl | Half-life | years | 4.468e9 | 0
in t | Elapsed time | years | 1e6 | 0
out n | Number of atoms remaining | atoms | (m / mm) * 6.02214076e23 * (0.5^(t / hl)) | 4
out frac | Fraction remaining | - | 0.5^(t / hl) | 6
out act | Activity | decays/s | ln(2) / (hl * 3.15576e7) * (m / mm) * 6.02214076e23 | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →