molecalculator

Moles & Molar Mass

How to Calculate Volume in Cubic Feet (ft³)

Calculator No. 01-7461 · Updated · Formula and assumptions shown below

Volume 150.00 ft³
Length
10 ft
Set in the form below
Width
5 ft
Set in the form below
Height
3 ft
Set in the form below
You enter
Length (ft), Width (ft), Height (ft)
You get
Volume (ft³)
Rounding
2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This guide explains how to calculate the volume of a space or object in cubic feet (ft³), whether it’s a rectangular room, a cylindrical tank, or an irregularly shaped container. You’ll learn the formulas for common shapes, how to convert from other units, and how to use the calculator below to get instant results.

Formula

For a rectangular prism (box), the volume is:

V = l × w × h

Where:

  • V = volume in cubic feet (ft³)
  • l = length in feet (ft)
  • w = width in feet (ft)
  • h = height in feet (ft)

For a cylinder (e.g., a pipe or tank), the volume is:

V = π × r² × h

Where r is the radius in feet and h is the height (or length) in feet. For a sphere:

V = (4/3) × π × r³

If your measurements are in inches, centimeters, or meters, convert them to feet first: 1 ft = 12 in, 1 ft = 0.3048 m, 1 ft = 30.48 cm.

Worked Example

Let’s calculate the volume of a rectangular box with the default values: length = 10 ft, width = 5 ft, height = 3 ft.

Step 1: Write down the formula: V = l × w × h

Step 2: Plug in the numbers: V = 10 × 5 × 3

Step 3: Multiply: 10 × 5 = 50; 50 × 3 = 150

So the volume is 150 ft³. The calculator gives the same result (150.00 ft³).

Assumptions

  • The shape is a perfect rectangular prism with straight, perpendicular sides.
  • All measurements are in the same unit (feet) before multiplying.
  • For cylinders and spheres, the shape is regular and symmetrical.

When to Use This Calculation

You need cubic feet when ordering materials like soil, gravel, concrete, or mulch (often sold by the cubic foot or cubic yard). It’s also used for shipping (freight volume), determining the capacity of a room for heating/cooling, or sizing a storage tank. For irregular shapes, you can divide the object into regular sections, calculate each volume, and add them together.

How to Read the Result

The result is the amount of space inside the object in cubic feet. One cubic foot is a cube that is 1 foot long, 1 foot wide, and 1 foot tall. If you need cubic yards (common for bulk materials), divide by 27 (since 1 yd³ = 27 ft³). If you need gallons, multiply by 7.48052 (1 ft³ ≈ 7.48 US gallons).

Common Mistakes

  • Mixing units: Multiplying feet by inches without converting. Always convert all dimensions to feet first.
  • Forgetting the height: Volume is three-dimensional; you must have three measurements (or use the correct formula for the shape).
  • Using diameter instead of radius for a cylinder: The formula uses radius (half the diameter). Using the diameter gives a result 4 times too large.
  • Rounding too early: If you convert inches to feet, use the exact decimal (e.g., 6 in = 0.5 ft) rather than a rounded 0.3 ft.

Tips

  • For a quick estimate, round each dimension to the nearest foot, but for exact amounts (like concrete), measure to the nearest inch and convert precisely.
  • When measuring a room, measure from wall to wall, and for height, floor to ceiling. Subtract any large obstructions if you need usable space.
  • For irregular shapes, break them into boxes, cylinders, or wedges. Calculate each and sum.
  • Always double-check your unit conversions: 1 ft = 12 in, so 1 ft³ = 1,728 in³ (12 × 12 × 12).

Troubleshooting

If your result seems too large or too small: Re-check that all dimensions are in feet. A common error is entering inches as if they were feet. For example, a box 24 in × 12 in × 12 in is 2 ft × 1 ft × 1 ft = 2 ft³, not 24 × 12 × 12 = 3,456 ft³.

If you get a negative or zero volume: Ensure all inputs are positive numbers. The calculator rejects negative values; if you see an error, correct the inputs.

If you need to convert from cubic inches to cubic feet: Divide by 1,728. For example, 3,456 in³ ÷ 1,728 = 2 ft³.

If you’re measuring a cylinder and the result is off: Check that you are using the radius, not the diameter. Also, make sure the height is perpendicular to the circular base.

Frequently Asked Questions

Q: How do I convert cubic feet to cubic yards?
A: Divide the cubic feet by 27. For example, 150 ft³ ÷ 27 = 5.56 yd³.

Q: How many cubic feet are in a cubic inch?
A: One cubic foot equals 1,728 cubic inches, so 1 cubic inch = 1/1,728 ft³ ≈ 0.000579 ft³.

Q: Can I use this calculator for a cylinder?
A: The calculator above is for a rectangular box. For a cylinder, use the formula V = π × r² × h, where r is the radius in feet and h is the height in feet.

Q: What is the volume of a 10 ft × 10 ft × 8 ft room?
A: Multiply 10 × 10 × 8 = 800 ft³.

Q: How do I measure an irregularly shaped area?
A: Divide it into regular shapes (boxes, cylinders, etc.), calculate each volume, and add them together. For a pile of sand, you might approximate it as a cone.

Q: Do I need to convert inches to feet before multiplying?
A: Yes, all dimensions must be in the same unit. If you have inches, divide by 12 to get feet, then multiply.

Related

Formula used
in l | Length | ft | 10 | 0
in w | Width | ft | 5 | 0
in h | Height | ft | 3 | 0
out v | Volume | ft³ | l * w * h | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →