This calculator converts a mass, m, into the amount of substance in moles using the substance’s molar mass. Enter the mass in grams and molar mass in grams per mole to get moles, plus the equivalent amount in millimoles. You need to know which substance the mass refers to, because each substance has a different molar mass.
Formula
To convert mass to moles, divide the mass by the molar mass:
n = m / M
- n is amount of substance, in moles (mol).
- m is the sample’s mass, in grams (g).
- M is the substance’s molar mass, in grams per mole (g/mol).
The units cancel as g ÷ (g/mol) = mol. The calculator’s second result converts moles to millimoles: mmol = n × 1000, because 1 mol = 1000 mmol. Enter mass in grams; if your value is in another unit, convert it first. For example, 500 mg = 0.500 g.
Worked Example
The defaults use a mass of 2.922 g and a molar mass of 58.44 g/mol. These values are suitable for illustrating sodium chloride (NaCl), whose molar mass from the listed standard atomic weights is 22.990 + 35.45 = 58.44 g/mol.
- Write the relationship: n = m / M.
- Substitute the default values: n = 2.922 g / (58.44 g/mol).
- Calculate: n = 0.05000 mol. The grams cancel, leaving moles.
- Convert to millimoles: 0.05000 mol × 1000 = 50.00 mmol.
The calculator displays the first result to four decimal places, so its headline is 0.0500 mol. It displays the millimole result to two decimal places: 50.00 mmol.
Assumptions
- The sample is a single, identified substance, and its entered molar mass applies to the chemical form being measured.
- The mass is in grams and the molar mass is in grams per mole.
- This is a mass-to-amount conversion only. It does not account for purity, mixtures, reaction yield, or how much dissolves.
- For a solution concentration calculation, use the amount in moles and the final solution volume separately.
What You’ll Need
- The mass of the sample, measured or given in grams. Convert from milligrams, kilograms, or another unit before entering it.
- The substance’s molar mass in g/mol. Find it from a reliable chemical reference or calculate it from its chemical formula and standard atomic weights.
- A calculator, or the calculator above. For a measured sample, use a balance appropriate to the sample size and required precision.
For a pure element, the molar mass is its atomic weight expressed in g/mol. For a compound, add the atomic weights of every atom in its formula, multiplying each by its subscript. For example, water, H2O, has a molar mass of 2 × 1.008 + 15.999 = 18.015 g/mol. Make sure the reference value matches the form you have, such as a hydrate versus an anhydrous compound.
Step-by-Step
- Identify the substance. Check its chemical formula and form. A compound, a hydrate, and a salt with a different counterion can have different molar masses, even if their names are similar.
- Find or calculate its molar mass. Use a trustworthy reference or sum the atomic weights in the formula. Include all atoms and any waters of crystallization shown in a hydrate formula. Record the result in g/mol.
- Put the mass in grams. Convert before dividing: kilograms to grams means multiply by 1000; milligrams to grams means divide by 1000. For example, 75 mg = 0.075 g.
- Divide mass by molar mass. Apply n = m / M, keeping the units visible. If a sample has a mass of 0.075 g and a molar mass of 150 g/mol, n = 0.075 / 150 = 0.0005 mol.
- Check the unit and scale. The answer should be in mol. A small mass or a large molar mass generally gives a small number of moles. Convert to mmol if that is easier to interpret: multiply mol by 1000.
- Keep sensible precision. Do not report more significant figures than your measurements or molar mass justify. Keep unrounded digits during intermediate calculations and round the final result.
Use this conversion when you know a sample’s mass and need its chemical amount for a stoichiometry calculation, a theoretical particle count, or a later solution calculation. Moles make it possible to compare substances by number of particles rather than by mass alone. The result is not a count of molecules; to estimate particles, multiply moles by the exact Avogadro constant, 6.02214076 × 1023 particles/mol.
Common Mistakes
- Multiplying instead of dividing. Moles equal mass divided by molar mass, not mass multiplied by molar mass.
- Mixing units. Dividing milligrams by g/mol without converting milligrams to grams makes the result 1000 times too small. Convert the mass first.
- Using the wrong molar mass. Check subscripts, parentheses, waters of hydration, and whether the reference describes a free acid, salt, or another chemical form.
- Confusing mass with volume. A volume in mL cannot be entered as a mass in g. A volume-to-moles calculation requires additional information, such as density for a liquid or concentration for a solution.
- Rounding too early. Early rounding can distort later stoichiometry. Keep extra digits until the final answer, then round to a precision supported by the inputs.
- Assuming the whole sample is pure. If the weighed material contains impurities or has a stated assay, this basic conversion treats the entire entered mass as the named substance. A purity adjustment requires a separate calculation.
Tips
- Write the units beside every number. The cancellation g ÷ (g/mol) = mol is a quick way to catch an inverted formula.
- Check the molar mass independently when the answer seems unexpectedly large or small. A missing subscript or hydrate can change it substantially.
- Keep mol and mmol distinct: 1 mmol = 0.001 mol. Millimoles are often convenient for small samples, but they are not a different kind of quantity.
- For reactions, convert each reagent’s mass to moles before comparing it with balanced-equation coefficients. Moles alone do not identify the limiting reagent unless the reaction ratio is also considered.
- For lab work, follow your lab method, the safety data sheet (SDS), and your supervisor.
Troubleshooting
The result looks 1000 times too large or small: Check whether the mass was entered in grams. Convert mg to g by dividing by 1000, or kg to g by multiplying by 1000.
The answer has the wrong units: Confirm molar mass is entered as g/mol, not mol/g, and use division. If your reference gives kg/mol, multiply that value by 1000 to express it in g/mol.
The answer seems chemically implausible: Recheck the formula, the number of atoms in each formula unit, and whether the material is hydrated or a salt. Also verify that the mass and molar mass refer to the same substance.
You have a solution volume but no mass: This calculator cannot convert volume directly to moles. If you know molarity, use moles = molarity × volume in liters. If you have a pure liquid’s volume, you also need its density and molar mass; do not treat mL as g.
Your sample is not pure: Look for a stated purity or assay and account for it separately when appropriate. If the composition is unknown, a mass alone cannot establish the moles of one particular component.
Frequently Asked Questions
What does “m” mean in moles calculations?
In the formula n = m / M, lowercase m means mass, usually in grams. It is not the unit meter.
How do I convert grams to moles?
Divide the mass in grams by the substance’s molar mass in g/mol. For example, 10.0 g of a substance with M = 20.0 g/mol is 0.500 mol.
Can I convert mL to moles?
Not from volume alone. You need concentration for a solution, or density and molar mass for a pure liquid, along with consistent units.
How do I get molar mass from a chemical formula?
Multiply each element’s atomic weight by its number of atoms in the formula, then add those values. Include atoms inside parentheses and any waters of hydration.
How many particles are in one mole?
One mole contains exactly 6.02214076 × 1023 specified entities, such as atoms, molecules, or formula units. State which entity you mean.
Can this formula convert moles back to mass?
Yes. Rearrange it to m = n × M: multiply the amount in moles by molar mass in g/mol to get mass in grams.
Related
Formula used
in m | Mass, m | g | 2.922 | 0 in mm | Molar mass, M | g/mol | 58.44 | 0 out n | Amount of substance | mol | m / mm | 4 out nm | Amount in millimoles | mmol | n * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Skip Calculator for Soil: What It Can and Can’t Do7.500 m³
- USD to KPW Calculator: Convert Dollars to North Korean Won90,000.00 KPW
- OK Calculator on TV on the Radio? Meaning Explained
- Pension Calculator KP: Estimate Your Pension Benefits
- Neonatal Kp Calculator: What It Means80.0000 mmol/mmol
- Newton to kp Converter Calculator and Formula1.0000 kp