The molality calculator finds a solution’s concentration in moles of solute per kilogram of solvent. Enter the solute mass, its molar mass, and the solvent mass to get molality in mol/kg (also called molal concentration). You will need the compound’s molar mass and the mass of the solvent alone, not the total solution.
Formula
Molality is the amount of solute, in moles, divided by the mass of solvent, in kilograms:
b = n / msolvent = (msolute / M) / (msolvent / 1000)
- b is molality in mol/kg.
- n is the amount of solute in moles.
- msolute is the solute mass in grams.
- M is the solute’s molar mass in g/mol.
- msolvent is the solvent mass in grams. Dividing by 1000 converts grams to kilograms.
The calculator first converts solute mass to moles by dividing by molar mass, then converts solvent mass to kilograms, and divides the former by the latter. The first output is the requested molality; the other outputs show the intermediate amount and solvent mass so you can check the calculation.
Worked Example
Using the calculator’s default values—5.844 g solute, molar mass 58.44 g/mol, and 500 g solvent:
- Calculate the amount of solute: n = 5.844 g / 58.44 g/mol = 0.1000 mol.
- Convert the solvent mass to kilograms: 500 g / 1000 = 0.500 kg.
- Divide moles by kilograms: b = 0.1000 mol / 0.500 kg = 0.200 mol/kg.
The result is 0.200 mol/kg. The example uses the molar mass of sodium chloride, 58.44 g/mol, as an input value; molar masses can vary slightly with the atomic-weight convention and rounding used.
Assumptions
- The entered solute is a single, identified compound, and its molar mass is appropriate for that compound.
- The solvent mass is known separately from the solute mass. The formula does not use final solution mass or volume.
- The calculation reports analytical molality; it does not account for dissociation, association, or chemical reaction in solution.
What You’ll Need
- A balance or recorded mass for the solute and the solvent, in grams or converted to grams.
- The solute’s molar mass in g/mol. Find it from the chemical formula and standard atomic weights, or use a reliable reference for the specified compound.
- A calculator, spreadsheet, or this calculator. Keep units alongside values until the final result.
Step-by-Step
- Identify the solute and solvent. The solute is the substance whose amount you are measuring; the solvent is the substance it is dissolved in. For a salt dissolved in water, for example, the salt is the solute and water is the solvent. For mixtures with more than one solute, calculate each solute’s molality separately unless the question defines another quantity.
- Find the solute mass. Record the mass of the solute in grams. If it is listed in milligrams, convert to grams by dividing by 1000. Do not substitute the mass of the whole solution.
- Find the molar mass. Use the compound’s chemical formula. Add the atomic masses for every atom shown, multiplying each element’s atomic mass by its subscript. For NaCl, using Na = 22.990 and Cl = 35.45 g/mol per mole of atoms gives 22.990 + 35.45 = 58.44 g/mol after rounding. Include parentheses and hydrates correctly when they appear in the formula.
- Convert solute mass to moles. Divide the solute mass in grams by its molar mass in g/mol. The units cancel to leave moles: n (mol) = mass (g) / molar mass (g/mol).
- Record the solvent mass only. Use the mass of solvent present, excluding the solute. If the solvent mass is given in grams, divide by 1000 to convert it to kilograms. If you are given total solution mass and solute mass instead, solvent mass is total solution mass minus solute mass, provided the system contains only those components and the given masses refer to the same sample.
- Divide moles by kilograms of solvent. Apply b (mol/kg) = n (mol) / solvent mass (kg). The numerical result is molality. Check that the denominator is kilograms, not grams.
- Report the result clearly. Include the value and unit, such as 0.200 mol/kg. Retain enough digits for the precision of the measurements, rather than implying that a rounded input is exact. Molality is sometimes written with a lowercase italic m; label the unit to avoid confusing it with mass.
When to Use Molality
Molality is useful when concentration must be related to solvent mass. Unlike molarity, which uses solution volume, molality does not change merely because a solution expands or contracts with temperature, as long as the amount of solute and solvent stays the same. This makes it useful in problems involving boiling-point elevation, freezing-point depression, and other colligative properties.
Use molarity instead when a problem asks for moles per litre of final solution or when a reaction calculation is based on solution volume. Molality and molarity are not interchangeable: converting between them generally requires solution density and enough information about the solution composition.
Common Mistakes
- Using solution mass in the denominator. The denominator is the solvent’s mass, not solvent plus solute. Identify which mass the question supplies.
- Leaving solvent mass in grams. The formula requires kilograms. A missing division by 1000 makes the answer 1000 times too small.
- Using the wrong molar mass. Check the compound formula, subscripts, parentheses, waters of crystallization, and chemical form. Similar compound names can have different formulas and molar masses.
- Confusing molality with molarity. Molality is mol/kg of solvent; molarity is mol/L of solution. The units are different, and the denominators describe different quantities.
- Rounding too early. Keep extra digits through the mole and mass conversions, then round the final value to a sensible number of significant figures.
- Assuming a dissolved substance stays as intact molecules. The basic calculation counts formula units from the compound’s molar mass. It does not automatically convert that count to the number of ions or particles after dissociation.
Tips
- Write the unit after each number and confirm the final units reduce to mol/kg.
- For a solid solvent or a mixed-solvent system, use the mass of the solvent component or components specified by the problem; do not silently treat total solution mass as solvent.
- Check whether a supplied molar mass is for the anhydrous compound, a hydrate, or a particular salt form.
- Use the calculator’s amount-of-solute and solvent-mass outputs to audit the two conversions before trusting the final molality.
- For bench work, follow your lab method, the safety data sheet (SDS) and your supervisor.
Troubleshooting
The result is off by a factor of 1000: check whether solvent mass was entered in grams and converted to kilograms. Also check whether a milligram value was converted to grams before calculating moles.
The result seems unexpectedly high: verify that the denominator is solvent mass, not a small mass of solute, and that the molar mass is in g/mol rather than kg/mol. A very small solvent mass can legitimately produce a high molality.
The result seems unexpectedly low: check that the solute mass is not entered in milligrams as though it were grams, and verify that you used the correct compound’s molar mass.
You only have solution volume: volume alone is not enough to find molality. You also need the solute amount and solvent mass, or sufficient information such as solution density and composition to determine those masses.
Your answer differs slightly from a reference: compare the atomic weights and rounding convention used for molar mass, and check whether the reference reports more digits. The underlying method should be the same.
Frequently Asked Questions
What is the molality formula?
Molality equals moles of solute divided by kilograms of solvent: b = n / kg solvent.
What unit is molality measured in?
The standard unit is mol/kg, often called molal. It means moles of solute per kilogram of solvent.
How do I find moles from grams?
Divide the solute mass in grams by its molar mass in g/mol. For example, 5.844 g divided by 58.44 g/mol is 0.1000 mol.
Can I calculate molality from molarity?
Not from molarity alone in general. You need additional information, commonly solution density and composition, to relate solution volume to solvent mass.
Does temperature change molality?
Temperature changes do not directly change molality if the masses of solute and solvent remain constant. Volume-based concentrations such as molarity can change as solution volume changes.
Is molality the same as molar concentration?
No. Molality uses kilograms of solvent, while molarity uses litres of final solution. Always use the quantity and unit requested in the problem.
Related
Formula used
in m | Mass of solute | g | 5.844 | 0 in mm | Molar mass | g/mol | 58.44 | 0.001 in s | Mass of solvent | g | 500 | 0 out b | Molality | mol/kg | (m / mm) / (s / 1000) | 3 out n | Amount of solute | mol | m / mm | 4 out sk | Solvent mass | kg | s / 1000 | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Serial Dilution Calculation Examples0.2000 mol/L
- Serial Dilution: How It Works & Why It Matters1.000 × 10−5 mol/L
- Serial Dilution A Level Biology: How To Do It30
- Serial vs Simple Dilution: Key Differences0.2000 mol/L
- Milton Tablet Dilution: Mixing Guide0.2000 mol/L
- qPCR Serial Dilution Standard Curve: How to Build One100,000 copies/µL