A base and height calculator finds a triangle’s area when you enter its base and the perpendicular height, using area = base × height ÷ 2. Enter both lengths in the same unit to get the area in square units, plus the area of the parallelogram formed by those dimensions.
Formula
The area of a triangle is half the product of its base and corresponding perpendicular height:
A = (b × h) ÷ 2
- A is the triangle’s area, in square units such as cm² or m².
- b is the base length.
- h is the perpendicular height measured to that base, in the same length unit.
The calculator also reports P = b × h, the area of a parallelogram with the same base and height. This is a useful comparison: a triangle with those dimensions has exactly half that area. No conversion factor is needed because the inputs use centimetres and the outputs use square centimetres. If you use another length unit, interpret the area as that unit squared.
Worked Example
Using the default base of 10 cm and perpendicular height of 6 cm:
- Multiply the base by the height: 10 cm × 6 cm = 60 cm².
- Divide by 2: 60 cm² ÷ 2 = 30.00 cm².
- For comparison, the parallelogram area is 10 cm × 6 cm = 60.00 cm².
The calculator therefore gives a triangle area of 30.00 cm² and a corresponding parallelogram area of 60.00 cm².
Assumptions
- The shape is a flat triangle, and the supplied height is perpendicular to the selected base.
- Both lengths are positive or zero and are expressed in the same unit.
- The formula calculates geometric area; it does not account for thickness, surface texture, or measurement uncertainty.
What Counts as the Height?
The height is not necessarily one of the triangle’s sloping sides. It is the shortest distance from the chosen base line to the opposite vertex: a line segment that meets the base at a right angle. The same triangle has three possible base-height pairs, one for each side, but each correctly paired set gives the same area.
For an acute triangle, the perpendicular height usually falls inside the triangle. For an obtuse triangle, it may fall outside the triangle, so you may need to extend the base line to measure it. In a right triangle, the two sides that meet at the right angle can be used as base and height. The remaining side is the hypotenuse, not the perpendicular height to the chosen base.
For example, a triangle with a 10 cm base and a 6 cm perpendicular height has area 30 cm². A slanted side might be longer or shorter than 6 cm; substituting that side for the height would be wrong unless it is itself perpendicular to the base.
How to Use the Calculator
- Choose a base and note its length.
- Measure or identify the perpendicular height corresponding to that base.
- Enter both measurements in the same unit, such as centimetres for each or metres for each.
- Read the triangle area. Use the parallelogram result only when you want the area of a parallelogram with the same dimensions.
The inputs are lengths, so they cannot be negative. A zero value produces zero area, which can be useful for checking the arithmetic but does not describe a non-degenerate triangle. The two-decimal display is a formatting choice, not a claim that measurements are accurate to one hundredth of a square centimetre.
Units, Measurement, and Common Mistakes
Area units are squared. If you enter centimetres, the result is cm²; if you enter metres, it is m². Do not label a result in centimetres or metres alone. If measurements use different units, convert one before calculating. For example, 10 cm is 0.10 m, so a base of 10 cm and height of 6 m should be entered as 0.10 m and 6 m, giving 0.30 m².
A frequent mistake is multiplying base and height without dividing by two. That gives the area of the matching parallelogram, not the triangle. Another is using a sloping edge as height even though it is not perpendicular. A third is mixing units or rounding measurements too early. Keep full precision through the multiplication and round the final area to a sensible precision for the original measurements.
For a rough estimate, approximate measurements may be sufficient. For a drawing, building task, or other application where accuracy matters, use suitable measuring tools and account for uncertainty in both dimensions. Since the area depends on the product of two measurements, errors in either one affect the result.
When This Formula Is Useful—and Its Limits
This method applies to every triangle, including scalene, isosceles, equilateral, acute, right, and obtuse triangles. It is especially convenient when a base and its perpendicular height are known or easy to measure. It can also help find a missing dimension: rearranging the equation gives h = 2A ÷ b or b = 2A ÷ h, provided the other quantities are known and the units are compatible.
If you know only the three side lengths, this calculator alone is not enough because it requires a perpendicular height. A different method, such as Heron’s formula, can find the area from three side lengths. For a triangle with side lengths a, b, and c, first calculate the semiperimeter s = (a + b + c) ÷ 2, then area = √[s(s − a)(s − b)(s − c)]. The side lengths must satisfy the triangle inequality: the sum of any two sides must be greater than the third.
The calculator does not determine whether your measurements can form a real triangle. Base and height alone establish an area, but many different triangles can share those dimensions. For a physical or drawn triangle, confirm that the height actually corresponds to the base you entered.
Frequently Asked Questions
How do I find the area of a triangle from its base and height?
Multiply the base by the perpendicular height, then divide by two: A = (b × h) ÷ 2. Keep the two length measurements in the same unit.
Does the height have to be inside the triangle?
No. For an obtuse triangle, the perpendicular from the opposite vertex can meet an extension of the base outside the triangle. The perpendicular distance still serves as the height.
Can I use a sloping side as the height?
Only if that side meets the selected base at a right angle. Otherwise, use the perpendicular distance from the base line to the opposite vertex.
What if I know the triangle’s three sides but not its height?
Use Heron’s formula, after checking that the side lengths can form a triangle. Calculate s = (a + b + c) ÷ 2, then find √[s(s − a)(s − b)(s − c)].
Why is the parallelogram answer twice the triangle answer?
A diagonal divides a parallelogram into two triangles of equal area. A triangle with the same base and perpendicular height therefore has half the parallelogram’s area.
Related
Formula used
in b | Base length | cm | 10 | 0 in h | Perpendicular height | cm | 6 | 0 out a | Triangle area | cm^2 | b * h / 2 | 2 out p | Parallelogram area | cm^2 | b * h | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- How to Find the Continuous Decay Rate
- Total Constant of Decay: How to Calculate It0.000121 1/s
- How to Calculate Decay Constant0.000121 1/s
- Half Life GitHub: What It Is and How to Use It
- Decay Constant: How to Calculate It0.000121 1/s
- Half-Life Games in Order: Full Release Timeline