Ionic charge per atom is the net electrical charge assigned to an ion, written with a sign and magnitude, such as Na+ or O2−. This calculator works out an atom’s charge in coulombs from its charge in elementary-charge units; enter the signed charge, and it returns both the charge in coulombs and the number of excess or missing electrons implied by that charge.
Formula
The charge in coulombs is the ionic charge number multiplied by the elementary charge:
q = z × e
- q is the charge of one ion, in coulombs (C).
- z is the signed ionic charge number, measured in elementary-charge units. For example, z = +1 for Na+, and z = −2 for O2−.
- e is the elementary charge, exactly 1.602176634 × 10−19 C.
The second output is −z: its sign convention makes a positive value mean electrons gained and a negative value mean electrons lost. The calculator treats an ion as having an integer charge, as is standard for ordinary monatomic ions. For a neutral atom, use z = 0; its net charge is 0 C.
Worked Example
The default input is z = +1, representing a singly charged positive ion such as Na+.
- Multiply the charge number by the elementary charge: q = 1 × 1.602176634 × 10−19 C.
- Therefore, q = 1.602176634 × 10−19 C, which rounds to 1.602177 × 10−19 C at six decimal places in the displayed scientific-notation value.
- The electron-count output is −z = −1. This means the positive ion has one fewer electron than the corresponding neutral atom.
For comparison, entering z = −2 gives q = −2 × 1.602176634 × 10−19 C = −3.204353268 × 10−19 C. The negative sign indicates that the ion’s net charge is negative.
Assumptions
- The input z is the net charge of one ion, in units of the elementary charge.
- The charge is an integer, appropriate for a monatomic ion or a whole polyatomic ion.
- The electron-count output assumes comparison with the corresponding neutral species; positive charge means electrons were lost, and negative charge means electrons were gained.
- This calculation gives net charge, not the partial charge assigned to an atom inside a molecule.
What Ionic Charge Means
An atom contains positively charged protons in its nucleus and negatively charged electrons around the nucleus. A neutral atom has the same number of protons and electrons, so its net charge is zero. When an atom gains or loses electrons, the proton count stays the same but the electron count changes. The resulting charged atom is a monatomic ion.
Atoms that lose electrons form positive ions, called cations. Sodium has 11 protons and 11 electrons when neutral. A sodium ion, Na+, has lost one electron: it still has 11 protons, but now has 10 electrons. Its net charge is +1e, or about +1.602 × 10−19 C.
Atoms that gain electrons form negative ions, called anions. A chloride ion, Cl−, has one more electron than neutral chlorine and carries charge −1e. An oxide ion, O2−, has gained two electrons and carries −2e. The superscript indicates the net charge; when the magnitude is one, the numeral 1 is usually omitted.
How to Work Out an Atom’s Charge
If you know the numbers of protons and electrons, subtract the electron count from the proton count. In elementary-charge units, the result is z = number of protons − number of electrons. To express the same charge in coulombs, multiply z by 1.602176634 × 10−19 C.
- 12 protons and 10 electrons: z = 12 − 10 = +2, so the ion has charge +2e.
- 17 protons and 18 electrons: z = 17 − 18 = −1, so the ion has charge −1e.
- 6 protons and 6 electrons: z = 0, so the atom is neutral.
Element identity comes from proton count, not charge. Changing electron count makes an ion but does not change the element. Changing proton count changes the element itself. Isotopes, which differ in neutron count, can have the same ionic charge because neutrons carry no electrical charge.
Common Ion Charges and Compound Context
Many elements form familiar ions, but common patterns are guides rather than rules for every chemical setting. Group 1 metals often form +1 ions, Group 2 metals often form +2 ions, and aluminum commonly forms Al3+. Halogens often form −1 ions, while oxygen commonly forms O2−. Transition metals can have multiple charges: iron, for example, forms both Fe2+ and Fe3+. The element name alone may not tell you which charge applies; the compound formula or a Roman numeral in the name can be needed.
In an ionic compound, the total charge must balance to zero. Magnesium ions have charge +2 and chloride ions have charge −1, so the neutral formula is MgCl2: one Mg2+ balances two Cl− ions. The charge on each ion is not divided by the number of atoms in the formula. Rather, each ion retains its own charge, while the sum for the formula unit is zero.
Polyatomic ions have an overall charge shared across a group of covalently bonded atoms. For example, sulfate is SO42−. That −2 is the net charge of the entire sulfate ion; it does not mean that every atom in sulfate individually has charge −2. Assigning formal or partial charge to each atom requires a different method, such as Lewis structures and electronegativity analysis.
Charge, Oxidation State, and Partial Charge
A frequent source of confusion is treating ionic charge, oxidation state, and partial atomic charge as interchangeable. They are related bookkeeping ideas but answer different questions. Ionic charge describes the net charge of a whole ion. Oxidation state is a formal assignment used to track electron distribution in compounds, following specified rules. Partial charges describe uneven electron density within a bond or molecule and are often fractional.
For example, in water the molecule is neutral overall, even though oxygen and hydrogen atoms can be assigned partial charges because electrons are shared unevenly. Those partial charges are not separate, whole-number ionic charges on isolated atoms. Similarly, an oxidation state written above an atom in a formula does not always mean that a free ion with that charge exists in the substance.
For a single isolated ion, charge is quantized in whole multiples of e: +1e, −1e, +2e, and so on. In bulk measurements, charge may be reported in coulombs and can be a large aggregate of many elementary charges; the calculator here converts the charge of one ion.
Frequently Asked Questions
How do you calculate the charge of an atom?
Subtract the number of electrons from the number of protons. A positive result means a cation, a negative result means an anion, and zero means neutral.
What is the charge of one electron in coulombs?
An electron has charge −1.602176634 × 10−19 C. The elementary-charge magnitude is positive by definition; the electron carries its negative.
Does ionic charge depend on the number of neutrons?
No. Neutrons have no electrical charge. Changing neutron count makes a different isotope, but it does not directly change the ion’s net charge.
Is an atom’s ionic charge the same as its oxidation number?
Not always. They can match for a simple monatomic ion, but oxidation number is a formal accounting value in a compound, while ionic charge is the net charge of an ion as a whole.
Can an atom have a fractional ionic charge?
A free monatomic ion has an integer number of elementary charges. Fractional values usually refer to partial charges in a bonded molecule or to an average over a material, not the net charge of one isolated ion.
Why does an ionic compound have no overall charge?
Its positive and negative ion charges balance. For example, one Mg2+ and two Cl− ions sum to +2 − 1 − 1 = 0.
Related
Formula used
in z | Ionic charge | e | 1 | - out q | Charge per ion | C | z * 1.602176634e-19 | 6 out ne | Excess electrons (positive) or deficit (negative) | electrons | -z | 3
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s