molecalculator

Moles & Molar Mass

Ka Value Calculator: Find the Acid Dissociation Constant

Calculator No. 01-3795 · Updated · Formula and assumptions shown below

Ka 0.000263
pKa
3.5798
Result, rounded to 4 decimal places
Undissociated acid, [HA]
0.095 mol/L
Set in the form below
Conjugate base, [A-]
0.005 mol/L
Set in the form below
You enter
Undissociated acid, [HA] (mol/L), Conjugate base, [A-] (mol/L), Hydrogen ion, [H+] (mol/L)
You get
Ka, pKa
Rounding
6 dp · 4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

A Ka value calculator finds an acid’s dissociation constant from its equilibrium concentrations: enter the acid and conjugate-base concentrations, and it returns Ka and pKa. This calculation uses the acid’s equilibrium state, not its starting concentrations or an assumed pH.

Formula

For a weak monoprotic acid, HA, that dissociates as HA ⇌ H+ + A−, the acid dissociation constant is:

Ka = [H+][A−] / [HA]

Here, [H+] is the equilibrium hydrogen-ion concentration in mol/L, [A−] is the equilibrium conjugate-base concentration in mol/L, and [HA] is the equilibrium undissociated-acid concentration in mol/L. The calculator also gives pKa = −log10(Ka). Ka is formally defined using dimensionless activities relative to a standard state; the concentration expression is the usual dilute-solution approximation. Consequently, this calculator reports a concentration-based estimate.

Worked Example

The defaults represent an equilibrium mixture with [HA] = 0.095 mol/L, [A−] = 0.005 mol/L, and [H+] = 0.005 mol/L.

  • Ka = (0.005 mol/L × 0.005 mol/L) / 0.095 mol/L
  • Ka = 0.00025 / 0.095 = 0.0026315789 ≈ 0.002632
  • pKa = −log10(0.0026315789) ≈ 2.5798

With the calculator’s displayed precision, the outputs are Ka = 0.002632 and pKa = 2.580.

Assumptions

  • The acid is monoprotic and the listed species are HA, H+, and A−.
  • All three entered concentrations are equilibrium concentrations in mol/L.
  • The solution is sufficiently dilute that concentration ratios approximate activity-based equilibrium constants.
  • No separate temperature or activity-coefficient correction is applied; Ka can depend on temperature and solution conditions.

What Ka Means

Ka measures the extent to which an acid transfers a proton to water. A larger Ka means a greater proportion of the acid is dissociated at equilibrium under comparable conditions. A smaller Ka indicates that more remains as HA. This is a tendency at equilibrium, not a speed: Ka does not tell you how quickly the system reaches equilibrium.

Because Ka values can be very small or large, chemists often use pKa, a logarithmic form that is easier to compare. A lower pKa corresponds to a larger Ka and a stronger acid. A difference of one pKa unit corresponds to a tenfold difference in Ka. For example, an acid with pKa 3 has a Ka ten times larger than one with pKa 4, under the same conventions and conditions.

Acid strength and solution pH are related but are not interchangeable. Ka is an equilibrium property for a particular acid under specified conditions; pH describes hydrogen-ion activity in a particular solution. The pH depends on concentration, other dissolved substances, and the acid’s dissociation, not just on Ka by itself.

How to Use the Calculator

  1. Obtain equilibrium concentrations for undissociated HA, conjugate base A−, and H+. Use the same concentration unit for all three; this calculator expects mol/L.
  2. Enter each concentration in its matching field. Do not enter initial or total concentrations unless they are also the equilibrium concentrations required by the formula.
  3. Read Ka first, then pKa. The result is a concentration-based estimate; use more rigorous activity-based data when the solution is not dilute.

The three entries should describe the same equilibrium mixture. For a simple acid dissociating in pure water, the H+ and A− concentrations may be approximately equal if water’s own ion contribution and other ions are negligible. That equality is not universal: added salts, buffers, other acids or bases, and charge-balancing ions can change the relationship. Do not force the values to match unless the chemical system justifies it.

Common Errors and Limits

  • Using starting concentrations: the equilibrium expression uses concentrations after equilibrium is established. Substituting the amount initially mixed can give a wrong value.
  • Mixing units: convert every concentration to mol/L before entering it. A value in mmol/L is 1,000 times its value in mol/L.
  • Confusing Ka with pKa: Ka is the constant; pKa is its negative base-10 logarithm. A lower pKa means a stronger acid.
  • Applying the monoprotic formula to a polyprotic acid: each proton-loss step has its own equilibrium constant and species expression. This calculator does not calculate multiple dissociation steps.
  • Ignoring non-ideal behavior: concentrated or high-ionic-strength solutions can require activities rather than raw concentrations. Temperature also affects equilibrium constants.

The calculator cannot determine equilibrium concentrations from a starting mixture, nor identify an unknown acid from a result alone. Those tasks require additional information, such as total analytical concentration, reaction conditions, and a suitable equilibrium model. Since concentrations must be positive for the logarithm and division in these formulas, use measured or calculated positive equilibrium values rather than entering zero.

Frequently Asked Questions

How do you calculate Ka from concentrations?
For HA ⇌ H+ + A−, multiply the equilibrium concentrations of H+ and A−, then divide by the equilibrium concentration of HA: Ka = [H+][A−]/[HA].

How do I convert Ka to pKa?
Calculate pKa = −log10(Ka). For example, if Ka = 1 × 10−5, pKa = 5.

Does a higher Ka mean a stronger acid?
Yes, when comparing acids under the same conditions and convention, a higher Ka indicates greater dissociation and therefore greater acid strength. The corresponding pKa is lower.

Can I calculate Ka from pH alone?
Not generally. pH gives information about hydrogen-ion activity, but calculating Ka also requires enough information to determine the equilibrium concentrations of the acid and its conjugate base, such as the acid’s total concentration and the system’s composition.

Is Ka the same as pH?
No. Ka describes an acid’s equilibrium dissociation; pH describes the acidity of a particular solution. The solution’s concentration and other components affect pH.

Related

Formula used
in h | Undissociated acid, [HA] | mol/L | 0.095 | 0
in a | Conjugate base, [A-] | mol/L | 0.005 | 0
in x | Hydrogen ion, [H+] | mol/L | 0.005 | 0
out ka | Ka | - | x * a / h | 6
out pka | pKa | - | -log10(ka) | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →