A kilometer-per-liter (km/L) calculator converts fuel economy between km/L, miles per gallon, and liters per 100 kilometers, or calculates km/L from distance and fuel used. Enter distance and fuel volume for a trip, or enter a known fuel-economy value; the result is a direct measure of distance traveled per liter.
Formula
Fuel economy in kilometers per liter is distance divided by fuel consumed:
km/L = d ÷ f
- d is distance traveled, in kilometers (km).
- f is fuel consumed, in liters (L).
- k is fuel economy, in km/L.
The calculator also reports consumption in liters per 100 kilometers using L/100 km = 100 ÷ k. For U.S. miles per gallon, it uses mpg (US) = km/L × 2.35215. This factor follows from 1 mile = 1.609344 km and 1 U.S. gallon = 3.785411784 L: 3.785411784 ÷ 1.609344 ≈ 2.35215. The conversion is specifically for the U.S. gallon, not the larger Imperial gallon.
Worked Example
With the calculator’s default values, the vehicle travels 100 km and uses 8 L.
- Divide distance by fuel used: 100 km ÷ 8 L = 12.5 km/L.
- Convert to liters per 100 km: 100 ÷ 12.5 = 8.00 L/100 km.
- Convert to U.S. miles per gallon: 12.5 × 2.35215 = 29.40 mpg (US), rounded to two decimal places.
The headline result is 12.50 km/L. It means the vehicle covers about 12.5 kilometers for each liter of fuel under the conditions represented by those inputs.
Assumptions
- The entered distance and fuel volume describe the same trip or measurement period.
- Fuel used is greater than zero; zero fuel cannot be used as a divisor.
- The mpg conversion uses U.S. gallons. It does not account for differences in test cycles, driving conditions, or vehicle displays.
- Results are rounded to two decimal places, so calculations made from displayed values may differ slightly from calculations using unrounded values.
How to Use the Calculator
For a trip-based estimate, enter the kilometers driven and the liters consumed over that distance. Use a distance and fuel figure from the same interval. If your odometer or trip record is in miles, convert it to kilometers first: multiply miles by 1.609344. If fuel volume is in U.S. gallons, convert it to liters by multiplying by 3.785411784. Do not enter a number of gallons as though it were liters.
The calculator requires fuel used to be greater than zero. A distance of zero is allowed mathematically, though it does not provide a useful estimate of a vehicle’s normal fuel economy. After calculating, read the first result as distance per liter. The second result expresses the same efficiency in the inverse convention, liters consumed per 100 km. The third gives an approximate U.S. mpg equivalent.
- Record the trip distance and fuel used, preferably over a longer interval for a steadier estimate.
- Check that distance is in kilometers and fuel volume is in liters.
- Enter both values, then compare the output with other figures only after checking their units and measurement conditions.
What the Result Means
A higher km/L value means more distance traveled for each liter, so it indicates better fuel economy when vehicles are compared under similar conditions. A lower L/100 km value indicates better economy, because the vehicle uses fewer liters to cover 100 km. These two units move in opposite directions: when km/L rises, L/100 km falls.
For example, 20 km/L corresponds to 5 L/100 km, while 10 km/L corresponds to 10 L/100 km. The second vehicle, at 10 km/L, travels half as far on a liter and consumes twice as much fuel per 100 km. This reciprocal relationship is why a seemingly small change in L/100 km may not represent the same proportional change as an equal numerical change in km/L.
Km/L is an observed or estimated average, not a guaranteed distance for the next liter. Speed, acceleration, traffic, hills, load, tire condition, weather, fuel type, and vehicle maintenance can all affect consumption. A dashboard estimate may also differ from a calculation based on actual fuel purchases.
Common Measurement Problems
The most frequent error is mixing units. A distance in miles divided by fuel in liters produces miles per liter, not km/L. Likewise, liters divided by kilometers gives L/km, not km/L. Confirm the units before interpreting any result; this calculator’s distance input is kilometers and its fuel input is liters.
Another source of error is using fuel added as though it were necessarily the exact amount consumed. A single fill-up may not align perfectly with the trip distance: the starting and ending fuel levels can differ, and pump shutoff points are not always identical. For a more representative estimate, compare odometer distance and fuel added across several fill-ups while using a consistent recording method. The result is still an estimate, not a laboratory measurement.
- Do not compare U.S. mpg directly with Imperial mpg. One Imperial gallon is about 4.54609 L, so its conversion factor from km/L is different.
- Do not confuse fuel economy (km/L or mpg) with fuel consumption (L/100 km). One is distance per volume; the other is volume per distance.
- Avoid over-interpreting extra decimal places. Input accuracy and driving variation usually matter more than tiny differences in the displayed result.
Frequently Asked Questions
How do I calculate km/L manually?
Divide the distance in kilometers by the fuel used in liters. If a vehicle travels 240 km using 16 L, then 240 ÷ 16 = 15 km/L.
How do I convert km/L to L/100 km?
Divide 100 by the km/L value. For example, 15 km/L equals 100 ÷ 15 = about 6.67 L/100 km.
How do I convert km/L to U.S. mpg?
Multiply km/L by about 2.35215. For instance, 15 km/L is approximately 35.28 mpg (US). This factor does not apply to Imperial mpg.
Is a higher km/L better?
Yes, for fuel economy comparisons made on a similar basis. A higher value means more kilometers per liter. The reverse convention, L/100 km, is better when its value is lower.
Why does my calculated fuel economy differ from the dashboard?
The dashboard may use its own averaging period or estimation method. Differences can also come from uneven fill levels, trip-distance rounding, traffic, speed, weather, or other changing driving conditions.
Can I calculate fuel economy from one short trip?
You can, but a short trip may produce a noisy estimate because small measurement differences have a larger effect. A longer distance or several consistent fill-up records generally gives a more representative average.
Related
Formula used
in d | Distance traveled | km | 100 | 0 in f | Fuel used | L | 8 | 0.000001 out k | Fuel economy | km/L | d / f | 2 out l | Fuel consumption | L/100 km | 100 / k | 2 out u | Fuel economy | mpg (US) | k * 2.35215 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s