Ksp is the equilibrium constant for a sparingly soluble ionic solid, while an ICE table tracks the initial, changing, and equilibrium concentrations used to calculate solubility. This calculator estimates the molar solubility of a 1:1 salt from its Ksp, then gives the equilibrium ion concentrations under the stated assumptions.
Formula
For a 1:1 salt that dissolves as AB(s) ⇌ A+(aq) + B−(aq), the solubility-product expression is Ksp = [A+][B−]. If the solution starts with no dissolved ions from another source and the molar solubility is s, then [A+] = s and [B−] = s, so Ksp = s2 and s = √Ksp.
- Ksp (k in the calculator) is the solubility-product constant; it is dimensionless when expressed using activities, though introductory calculations commonly treat concentration values in mol/L as approximate.
- s is molar solubility, in mol/L of dissolved formula units.
- [A+] and [B−] are equilibrium ion concentrations in mol/L. For this salt, each equals s.
The calculator uses the square-root relationship only for a 1:1 salt under the assumptions below. It does not solve every Ksp problem: salts with different ion ratios require a different expression and often a cubic or higher-order equation.
Worked Example
For the default Ksp of 1.8 × 10−10:
- Write the dissolution equation: AB(s) ⇌ A+ + B−.
- Set the equilibrium concentrations to [A+] = s and [B−] = s.
- Substitute into the equilibrium expression: Ksp = s × s = s2.
- Solve: s = √(1.8 × 10−10) = 1.341641 × 10−5 mol/L.
Rounded to the calculator’s six decimal places in mol/L, the displayed result is 0.000013 mol/L. Each ion concentration is also 1.341641 × 10−5 mol/L, or 0.000013 mol/L when rounded to six decimal places.
Assumptions
- The solid is a 1:1 salt, AB, and produces one A+ and one B− per formula unit.
- No common ions or other reactions contribute meaningfully to the ion concentrations.
- The solution is sufficiently dilute that concentration-based Ksp approximates the thermodynamic activity-based constant.
- Temperature is the temperature for which the entered Ksp applies; Ksp is not universal across temperatures.
What Ksp and an ICE Table Mean
Ksp describes the equilibrium between a solid ionic compound and its dissolved ions in a saturated solution. For a general salt AmBn(s), dissolution is written AmBn(s) ⇌ mA + nB, and the solid is omitted from the equilibrium expression because its activity is constant. The ion concentrations are raised to their stoichiometric coefficients: Ksp = [A]m[B]n.
ICE stands for Initial, Change, Equilibrium. The table is a bookkeeping method, not a separate equilibrium law. It organizes starting concentrations, changes linked to the balanced equation, and the final concentrations to substitute into Ksp. A Ksp alone is not enough to choose an ICE table: first identify the solid’s formula, dissolution stoichiometry, and any ions already present.
How to Set Up an ICE Table
For AB(s) ⇌ A+ + B−, suppose pure water initially contains neither ion. The table can be written as follows:
- Initial: [A+] = 0; [B−] = 0.
- Change: [A+] = +x; [B−] = +x.
- Equilibrium: [A+] = x; [B−] = x.
Then Ksp = x2, so x = √Ksp. The positive root is selected because a concentration cannot be negative. The resulting x is the molar solubility as well as the concentration of each ion for this particular 1:1 dissolution.
For a salt such as AB2(s) ⇌ A2+ + 2B−, dissolution by x mol/L produces [A2+] = x and [B−] = 2x. Therefore Ksp = x(2x)2 = 4x3, not x2. The calculator’s 1:1 answer does not apply to this case.
Common-Ion Effects and Other Complications
If one of the ions is already present, its initial concentration is not zero. For AB dissolving into a solution that initially contains c mol/L of A+, the table gives equilibrium concentrations [A+] = c + x and [B−] = x. The equation becomes Ksp = (c + x)x. This common-ion effect usually lowers the amount of solid that dissolves compared with pure water.
Other complications include acid-base reactions that consume an ion, complex-ion formation, and non-ideal behavior at appreciable ionic strength. In those cases, a simple ICE table may need additional equilibria, mass balances, or activity corrections. If a solid dissolves to an ion that reacts with water, the total dissolved amount may not equal the free-ion concentration used in Ksp.
How to Use the Result and Avoid Mistakes
- Enter Ksp in scientific notation when it is small; for example, 1.8e-10 means 1.8 × 10−10.
- Check that the Ksp belongs to the correct solid, dissolution reaction, and temperature. Values from different sources can use different conditions or conventions.
- Use the balanced dissolution equation to determine powers and coefficients before assigning ICE-table changes.
- Keep units consistent. Molar solubility is expressed in mol/L; convert to g/L only by multiplying by the compound’s molar mass.
- Do not compare Ksp values alone to rank solubility when compounds have different stoichiometries. Calculate or compare molar solubilities using each compound’s own expression.
A common misconception is that Ksp itself equals solubility. That is true only in special cases with matching stoichiometry and concentration conventions; for a 1:1 salt, solubility is √Ksp, not Ksp. Also, a calculated equilibrium solubility is not automatically the amount that will dissolve in any sample: the quantity of solid, solution volume, temperature, and presence of other dissolved species matter.
Frequently Asked Questions
Is Ksp the same as molar solubility?
No. Ksp is an equilibrium constant, while molar solubility is the concentration of dissolved formula units. For a 1:1 salt in pure water, s = √Ksp.
Why is the solid left out of the Ksp expression?
A pure solid has constant activity, so its contribution is incorporated into the equilibrium constant. Only dissolved species appear in the usual Ksp expression.
When can I use s = √Ksp?
Use it for a 1:1 salt that produces one of each ion, when there are no relevant initial ions or side reactions and concentration approximations are suitable.
What does x represent in an ICE table?
x represents the molar amount of reaction progress per liter as expressed by the balanced equation. Stoichiometric coefficients determine whether each ion changes by x, 2x, or another multiple.
Does a larger Ksp always mean greater solubility?
Not when comparing salts with different ion ratios. Their Ksp expressions have different powers and coefficients, so calculate the molar solubility for each salt before comparing.
Related
Formula used
in k | Ksp | - | 1.8e-10 | 0 out s | Molar solubility | mol/L | sqrt(k) | 6 out ion | Equilibrium concentration of each ion | mol/L | s | 6
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s