molecalculator

Moles & Molar Mass

Liter to Quart Calculator: Convert Liters to Quarts

Calculator No. 01-6303 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

A liter-to-quart calculator converts a volume in liters to quarts; enter the number of liters and it returns the equivalent volume. Because the US liquid quart and the Imperial quart are different sizes, choose the quart system that matches your recipe, measurement, or reference.

Formula

Quarts = liters × quarts per liter. In the calculator, l is the volume entered in liters (L), and q is the selected conversion factor, measured in quarts per liter (qt/L). The output, qt, is the volume in the selected quart system.

  • US liquid quarts: 1 L = 1.0566882094 US liquid qt, so multiply liters by 1.0566882094. The calculator uses the reciprocal factor, 1 qt = 0.946352946 L.
  • Imperial quarts: 1 L = 0.8798769932 Imperial qt, using 1 Imperial qt = 1.1365225 L.

These factors follow from the definitions of the units. A US liquid gallon is exactly 3.785411784 liters and contains four US liquid quarts. An Imperial gallon is exactly 4.54609 liters and contains four Imperial quarts. The calculator uses rounded conversion factors, so its displayed result is rounded to three decimal places.

Worked Example

Using the default input of 1 L and the default US liquid quart selection:

  1. Use the US factor: 1 qt = 0.946352946 L.
  2. Convert to quarts per liter: 1 ÷ 0.946352946 = 1.0566882094 qt/L.
  3. Multiply: 1 L × 1.0566882094 qt/L = 1.0566882094 qt.
  4. Rounded to the calculator’s three decimal places: 1.057 US liquid qt.

For the same 1 L with Imperial quarts selected, the result is 1 × 0.2199692483 = 0.2199692483, or 0.220 Imperial qt to three decimal places.

When to Use a Liter-to-Quart Conversion

Liters are part of the metric system, while quarts are used in some customary measurement systems. Converting is useful when a container is labeled in liters but a recipe or instruction gives quarts, or when comparing volumes in references that use different units. The conversion changes only the way the same volume is expressed; it does not change the amount of liquid.

Check the intended system before using a result. A US recipe ordinarily means US liquid quarts. An Imperial quart is used in the Imperial system, including some older or region-specific references. If a source simply says “quart” without identifying the system, its location and context may help, but the unit remains ambiguous. For an exact match, check the source’s measurement convention rather than assuming the two quarts are interchangeable.

US Liquid Quarts and Imperial Quarts

The difference is substantial enough to matter in cooking, storage, and other volume comparisons. One US liquid quart is 0.946352946 L, slightly less than a liter. One Imperial quart is 1.1365225 L, more than a liter. Therefore, one liter is about 1.057 US liquid quarts but only about 0.880 Imperial quarts.

“US liquid quart” also distinguishes the ordinary liquid measure from the US dry quart, a separate unit used for dry volume. Do not assume a dry-ingredient measurement can be substituted for a liquid-volume measurement: the appropriate unit and the ingredient’s packing or density can affect the result. This calculator is for liquid-volume quart definitions, not dry-quart conversions or conversions from volume to mass.

How to Get a Reliable Result

  • Enter a nonnegative volume in liters. For example, enter 0.5 for half a liter, not 500 (which would mean 500 liters).
  • Select US liquid quart or Imperial quart according to the source you are matching.
  • Read the result with its unit. A number without the quart system can be misleading.
  • Keep extra precision during intermediate calculations. Round the final value to suit the measuring task, not before multiplying.

Examples using the US liquid quart factor include 2 L × 1.0566882094 = 2.1133764188 qt, or about 2.113 qt, and 0.5 L × 1.0566882094 = 0.5283441047 qt, or about 0.528 qt. For Imperial quarts, 2 L is about 1.760 qt. These examples illustrate why the selected system should accompany the number.

Common Conversion Mistakes and Limits

A frequent mistake is to use 1.057 as the number of liters in a quart. It is approximately the number of US liquid quarts in one liter; the reverse conversion is about 0.946 liters per US liquid quart. When converting in the opposite direction, divide quarts by 1.0566882094 or multiply by 0.946352946 L per US liquid quart. For Imperial quarts, use that system’s own factor.

Another error is confusing volume with weight. Liters and quarts measure volume, while grams, kilograms, and pounds measure mass. A liter of a particular liquid does not generally have the same mass as a liter of another liquid; converting volume to mass requires the substance’s density and appropriate conditions. Likewise, this calculator does not determine how much a container can safely hold, account for liquid expansion with temperature, or convert dry ingredient quantities by weight.

Displayed values are rounded, so multiplying a rounded answer back may not reproduce the original input exactly. For routine kitchen or household measurements, three decimal places are usually more precision than the measuring vessel can show. For technical work, retain the unrounded calculation where possible and follow the precision requirements of the relevant method.

Frequently Asked Questions

How many quarts are in a liter?
One liter is about 1.057 US liquid quarts, or about 0.880 Imperial quarts. The answer depends on which quart is meant.

Is 1 liter the same as 1 quart?
No. A liter is about 1.057 US liquid quarts. It is also smaller than an Imperial quart: 1 Imperial quart is 1.1365225 L.

How many liters are in a US liquid quart?
One US liquid quart is exactly 0.946352946 L. To convert US liquid quarts to liters, multiply the quart value by 0.946352946.

How many US quarts are in 2 liters?
Two liters are about 2.113 US liquid quarts: 2 × 1.0566882094 = 2.1133764188, rounded to three decimal places.

Does this calculator convert dry quarts?
No. It converts liters to US liquid quarts or Imperial quarts. Dry quarts are a separate volume unit, so select a conversion specifically intended for dry measure if that is what your source uses.

Related

Formula used
in l | Volume in liters | L | 1 | 0
sel q | Quart system | US liquid quart=0.2641720524, Imperial quart=0.2199692483
out qt | Quarts | qt | l * q | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →