molecalculator

Moles & Molar Mass

Liters per Gallon Calculator: US and Imperial

Calculator No. 01-6307 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This liters-per-gallon calculator converts gallons to liters or liters to gallons, with separate choices for US liquid gallons and Imperial gallons. Enter a volume and select the gallon standard; the calculator returns the equivalent volume using the exact defined conversion factors.

Formula

The calculator uses the selected gallon’s volume in liters. For gallons to liters, multiply the number of gallons by liters per gallon. For liters to gallons, divide liters by liters per gallon.

  • V is the entered volume, in gallons for the first direction or liters for the second.
  • G is the selected conversion factor: 3.785411784 L per US liquid gallon or 4.54609 L per Imperial gallon.
  • VL is the converted volume in liters; Vgal is the converted volume in the selected gallon standard.

In symbols: VL = Vgal × G, and Vgal = VL ÷ G. These factors are exact definitions, not approximations. The calculator’s result is rounded to four decimal places for display; extra digits do not imply that a measured volume is that precise.

Worked Example

The defaults select the US liquid gallon, enter 1, and choose gallons to liters. Therefore:

1 gal × 3.785411784 L/gal = 3.785411784 L ≈ 3.7854 L.

The gallon units cancel, leaving liters. This is the calculator’s displayed result at four decimal places.

Assumptions

  • The selected unit really is a US liquid gallon or an Imperial gallon—not a dry gallon or an unspecified “gallon.”
  • The entered value is a volume, and the conversion changes units only; it does not account for temperature-related expansion or measurement uncertainty.
  • The conversion factors are exact by definition. A rounded display is for readability.

How to Use the Calculator

  1. Choose US liquid gallon or Imperial gallon. If converting liters to gallons, this choice determines which gallon is returned.
  2. Enter the volume as a nonnegative number. The unit expected depends on the direction you select.
  3. Choose gallons to liters or liters to gallons, then read the converted result and its unit.

The input box is labeled with both possible units because the direction determines which one applies. For example, if you enter 2 and choose gallons to liters, “2” means 2 gallons. If you choose liters to gallons, it means 2 liters. Check the direction before using the result.

US and Imperial Gallons

“Gallon” does not mean the same volume everywhere. A US liquid gallon is exactly 3.785411784 liters. An Imperial gallon, used in the United Kingdom and some other contexts, is exactly 4.54609 liters. The Imperial gallon is about 20% larger than the US liquid gallon.

For instance, one US gallon is about 3.7854 L, while one Imperial gallon is 4.5461 L. Calling either result simply “liters per gallon” without identifying the standard can cause a substantial error, especially in recipes, fuel comparisons, tank specifications, or published data. The United States also has a dry gallon, a separate unit used for dry-volume measurements; it is not an option in this calculator, so do not apply the US liquid-gallon factor to a dry-gallon quantity.

Conversion Examples and Comparisons

The formulas work for any nonnegative volume, not just whole numbers. A few common reference values, rounded to four decimal places, are:

  • 1 US liquid gallon = 3.7854 L.
  • 1 Imperial gallon = 4.5461 L.
  • 5 US liquid gallons = 18.9271 L.
  • 10 L = about 2.6417 US liquid gallons.
  • 10 L = about 2.1997 Imperial gallons.

These examples are rounded for convenience. For a reverse check, multiply the converted gallons by the same liters-per-gallon factor; the result should return to the original liters apart from rounding. Do not reverse the calculation using a different gallon standard.

Common Mistakes and Precision

  • Mixing gallon standards: A US gallon and an Imperial gallon differ by about 0.7607 L. Confirm which one a label, recipe, or source means.
  • Reversing the operation: Multiply gallons by the factor to get liters; divide liters by the factor to get gallons.
  • Confusing volume and weight: Liters and gallons measure volume. Converting a volume to mass requires the liquid’s density, which varies by substance and sometimes by temperature.
  • Assuming a rounded result is exact: The factor can be exact while your original measurement is approximate. Report only as many meaningful digits as the measurement supports.

For rough mental conversion, 1 US gallon is about 3.8 L and 1 Imperial gallon is about 4.5 L. Those shortcuts are useful for estimation, but use the full factor when accuracy matters. Temperature can change the physical volume of a liquid, but this unit conversion does not adjust for that effect.

Frequently Asked Questions

How many liters are in a gallon?
One US liquid gallon is exactly 3.785411784 L. One Imperial gallon is exactly 4.54609 L. Identify the standard before using a conversion.

How do I convert gallons to liters?
Multiply the gallon value by 3.785411784 for US liquid gallons or by 4.54609 for Imperial gallons.

How do I convert liters to gallons?
Divide liters by 3.785411784 to get US liquid gallons, or divide by 4.54609 to get Imperial gallons.

Is a US gallon the same as a UK gallon?
No. The UK traditionally uses the Imperial gallon, which is larger: 4.54609 L compared with 3.785411784 L for the US liquid gallon.

How many liters are in 5 gallons?
It depends on the standard: 5 US liquid gallons are 18.92705892 L; 5 Imperial gallons are 22.73045 L. Rounded to four decimal places, those are 18.9271 L and 22.7305 L.

Does this convert gallons to kilograms?
No. Gallons and liters are volume units; kilograms measure mass. A volume-to-mass conversion needs the liquid’s density and appropriate temperature conditions.

Related

Formula used
sel gal | Gallon standard | US liquid gallon=3.785411784, Imperial gallon=4.54609
in vol | Volume | gal or L | 1 | 0
sel dir | Conversion direction | Gallons to liters=1, Liters to gallons=2
out result | Converted volume | L or gal | vol * (1) * (dir - 1) + vol * (1) * (2 - dir) * 1 / (gal) + vol * (1) * (dir - 1) * gal | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →