molecalculator

Moles & Molar Mass

Magnesium Sulfate Molecular Mass and Calculation

Calculator No. 01-6636 · Updated · Formula and assumptions shown below

Amount of magnesium sulfate 0.1000 mol
Formula units
6.022 × 1022 units
Result, rounded to a whole number
Sample mass
12.037 g
Set in the form below
Molar mass
120.37 g/mol
Set in the form below
You enter
Sample mass (g), Molar mass (g/mol)
You get
Amount of magnesium sulfate (mol), Formula units (units)
Rounding
4 dp · 0 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Magnesium sulfate, MgSO4, has a molar mass of about 120.37 g/mol for the anhydrous compound. Enter the mass of a sample and its molar mass below to calculate how many moles it contains; the calculator also reports the corresponding number of formula units.

Formula

The amount of substance is calculated as n = m / M. Here, n is the amount in moles (mol), m is the sample mass in grams (g), and M is the molar mass in grams per mole (g/mol). The second output converts moles to formula units using N = n × NA, where N is the number of formula units and the exact Avogadro constant is NA = 6.02214076 × 1023 mol−1.

For anhydrous magnesium sulfate, the molar mass is obtained by adding the atomic masses for one magnesium, one sulfur, and four oxygen atoms:

M(MgSO4) = 24.305 + 32.06 + 4 × 15.999 = 120.361 g/mol.

The atomic weights used here are conventional abridged standard atomic weights, in g/mol: Mg = 24.305, S = 32.06, and O = 15.999. The displayed 120.37 g/mol is a commonly rounded reference value; entering 120.361 g/mol gives a slightly more precise result under this convention. The formula shows atoms per formula unit, not molecules in the ordinary covalent-molecule sense: magnesium sulfate is an ionic compound.

Worked Example

Using the defaults, the sample mass is 12.037 g and the molar mass is 120.37 g/mol.

  1. Calculate the amount: n = 12.037 g / 120.37 g/mol = 0.1000 mol.
  2. Convert the amount to formula units: N = 0.1000 mol × 6.02214076 × 1023 mol−1 = 6.022 × 1022 formula units.

The first result is 0.1000 mol, matching the calculator’s four-decimal display. The second is rounded to the nearest whole number by the output setting, so its displayed value is an approximate count; the exact calculated value is approximately 6.022 × 1022.

Assumptions

  • The sample is pure, anhydrous MgSO4; its mass does not include water of crystallization or other material.
  • The entered molar mass is in g/mol and the sample mass is in g.
  • The formula-unit count uses the exact Avogadro constant and treats the stated formula as the substance being counted.

What “Molecular Mass” Means Here

In everyday searches, “molecular mass” is often used to ask for the mass associated with a chemical formula. Strictly, molecular mass describes a discrete molecule and is usually expressed in unified atomic mass units (u). Magnesium sulfate is made of Mg2+ and SO42− ions arranged in a crystal lattice, rather than separate MgSO4 molecules. Its formula mass is therefore about 120.37 u per formula unit, while its molar mass is about 120.37 g/mol.

The numerical values match because one mole contains Avogadro’s number of entities, but the units and meanings differ. Use u when discussing the mass of one formula unit, g/mol when converting a laboratory-scale mass to moles, and g when weighing a sample. A value written simply as “120.37” is incomplete unless its unit or intended quantity is clear.

Anhydrous Salt Versus Hydrated Forms

Magnesium sulfate is also encountered in hydrated forms, whose formulas include water molecules in the crystal. The familiar heptahydrate is MgSO4·7H2O. Its molar mass is approximately 246.47 g/mol, substantially greater than the anhydrous salt because each formula unit includes seven water molecules. Other hydration states have different molar masses, so a label that says only “magnesium sulfate” may not provide enough information for a precise calculation.

For the heptahydrate, using the same atomic weights, the calculation is approximately 120.361 + 7 × (2 × 1.008 + 15.999) = 246.47 g/mol. Do not use the anhydrous value of 120.37 g/mol for a hydrate: the resulting mole calculation will be wrong. Check the full formula, including the dot and water count, on the material specification or label.

  • Anhydrous MgSO4: about 120.37 g/mol.
  • MgSO4·7H2O: about 246.47 g/mol.

Using the Calculator and Choosing a Value

Enter the mass in grams and the molar mass in g/mol. The default mass is only an example chosen to produce a simple 0.1000 mol result; it is not a recommended sample size or a laboratory instruction. If your mass is in milligrams, divide it by 1,000 before entering it. If your balance reports kilograms, multiply by 1,000 to convert to grams.

Choose a molar mass that matches the material’s exact form. For pure, anhydrous MgSO4, 120.37 g/mol is suitable for many routine calculations; 120.361 g/mol follows directly from the atomic weights shown above. For a hydrate, calculate from its complete formula or use a reliable specification for that form. If purity is below 100%, the simple calculation gives the amount implied by total weighed mass, not the actual amount of magnesium sulfate. Correcting for purity requires a known mass fraction.

When bench work is involved, follow your lab method, the safety data sheet (SDS), and your supervisor.

Common Calculation Mistakes and Limits

The most frequent error is confusing formula mass with molar mass or omitting units. Another is using the anhydrous molar mass for a hydrate. A third is entering a mass in milligrams as though it were grams: 500 mg is 0.500 g, not 500 g. Finally, extra digits in a computed result do not make a measurement more precise than the balance reading or the stated purity.

This calculator performs a mass-to-moles conversion; it does not determine water content, purity, or the chemical form of an unknown sample. It also does not calculate solution concentration, which needs a solution volume. In an aqueous solution, magnesium sulfate is commonly described in terms of dissolved Mg2+ and SO42− ions, but this arithmetic alone does not predict activity, ion pairing, or solution behavior.

Frequently Asked Questions

What is the molar mass of anhydrous magnesium sulfate?
It is about 120.37 g/mol. Using the stated abridged atomic weights gives 120.361 g/mol before rounding.

What is the formula mass of MgSO4?
It is about 120.37 u per formula unit. Magnesium sulfate is ionic, so “formula mass” is more precise than “molecular mass.”

What is the molar mass of magnesium sulfate heptahydrate?
MgSO4·7H2O has a molar mass of approximately 246.47 g/mol, because the formula includes seven waters of crystallization.

How many moles are in 1 g of magnesium sulfate?
For anhydrous MgSO4, 1 g ÷ 120.37 g/mol is approximately 0.008308 mol. A hydrate requires its own molar mass.

Is 120.37 g/mol the same as 120.37 u?
The numerical values are the same, but the units describe different quantities: g/mol is mass per mole, while u is the mass of an individual formula unit on the atomic mass scale.

Related

Formula used
in m | Sample mass | g | 12.037 | 0
in mm | Molar mass | g/mol | 120.37 | 0.001
out n | Amount of magnesium sulfate | mol | m / mm | 4
out f | Formula units | units | n * 6.02214076e23 | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →