molecalculator

Moles & Molar Mass

Mass of 1 mL Ethanol: Weight & Density

Calculator No. 01-8972 · Updated · Formula and assumptions shown below

Mass 0.789 g
Density of ethanol
0.789 g/mL
Set in the form below
Volume
1 mL
Set in the form below
You enter
Density of ethanol (g/mL), Volume (mL)
You get
Mass (g)
Rounding
3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

One milliliter of ethanol (ethyl alcohol, C2H5OH) at 20 °C has a mass of 0.789 grams. This value comes directly from ethanol’s density, 0.789 g/mL at 20 °C, which is the standard temperature for density measurements in chemistry. The mass changes slightly with temperature because liquids expand when heated, so the same 1 mL volume holds a little less ethanol as it warms.

Formula

The relationship between mass, density, and volume is one of the most used equations in chemistry:

m = ρ × V

  • m = mass in grams (g)
  • ρ (rho) = density in grams per milliliter (g/mL)
  • V = volume in milliliters (mL)

For pure ethanol, ρ = 0.789 g/mL at 20 °C. This means each milliliter of the liquid contains 0.789 grams of ethanol molecules. The density is a physical property that depends on temperature and, for solutions, on the concentration of ethanol in water.

Worked Example

Using the default values from the calculator (density = 0.789 g/mL, volume = 1 mL):

  1. Write the formula: m = ρ × V
  2. Insert the numbers: m = 0.789 g/mL × 1 mL
  3. Multiply: m = 0.789 g

So 1 mL of pure ethanol weighs 0.789 grams. If you had 250 mL, the mass would be 0.789 × 250 = 197.25 g.

Assumptions

  • The ethanol is pure (100% by volume, anhydrous) – not a water mixture.
  • The temperature is 20 °C (293.15 K). At 25 °C the density drops to about 0.785 g/mL.
  • The liquid is at atmospheric pressure; pressure has a negligible effect on liquid density.

Why Density Changes with Temperature

Like most liquids, ethanol expands when heated. The mass of a given volume therefore decreases as temperature rises. At 0 °C, the density of ethanol is about 0.806 g/mL; at 20 °C it is 0.789 g/mL; at 30 °C it falls to about 0.781 g/mL. This is why laboratory measurements of liquid volumes are often reported with the temperature. If you need high precision, you must measure the temperature and use the density at that exact temperature.

Ethanol–Water Mixtures: A Common Confusion

Most “ethanol” you encounter is not pure – it is a mixture with water. “95% ethanol” (95% by volume, the common laboratory grade) has a density of about 0.805 g/mL at 20 °C, so 1 mL weighs about 0.805 g. “Absolute ethanol” (≥99.8%) is close to the pure value of 0.789 g/mL. Commercial alcoholic beverages are much more dilute: 40% alcohol by volume (80 proof) has a density around 0.95 g/mL because water is denser (0.998 g/mL at 20 °C) and makes up most of the volume.

How to Measure It Yourself

If you want to verify the mass of 1 mL of ethanol in your lab:

  1. Weigh a clean, dry graduated cylinder or volumetric pipette on an analytical balance; record the mass.
  2. Add exactly 1 mL of ethanol using the pipette or cylinder.
  3. Weigh the cylinder with ethanol; subtract the empty mass.
  4. The difference is the mass of the ethanol.

Use a pipette for accuracy – a graduated cylinder has a larger uncertainty. Also, ethanol evaporates quickly, so cap the container while weighing.

Common Mistakes and Misconceptions

  • Confusing density with specific gravity: Specific gravity is the ratio of a substance’s density to water’s density at the same temperature. For ethanol, specific gravity ≈ 0.789, but it is unitless, while density has units of g/mL.
  • Using the density of water: Water’s density is 1.00 g/mL, so many people assume 1 mL of any liquid weighs 1 g. Ethanol is about 21% lighter.
  • Ignoring temperature: A 5 °C difference changes the mass by roughly 0.5%, which matters in precise work.
  • Assuming “ethanol” means a beverage: Drinks are mostly water, so their density is much closer to 1 g/mL.

Why This Matters in the Lab

Knowing the mass of a given volume of ethanol is essential for preparing solutions by mass, calculating molarity when you measure by volume, and converting between mass and volume in stoichiometry. For example, to make a 1 M ethanol solution (46.07 g/mol), you would need 46.07 g of pure ethanol, which is 46.07 g ÷ 0.789 g/mL ≈ 58.4 mL. Without the density, you cannot make that conversion accurately.

Frequently Asked Questions

How many grams is 1 mL of 95% ethanol?

95% ethanol (by volume) has a density of about 0.805 g/mL at 20 °C, so 1 mL weighs about 0.805 g. The extra mass compared to pure ethanol comes from the water mixed in.

Does 1 mL of ethanol weigh less than 1 mL of water?

Yes. Water has a density of about 1.00 g/mL, so 1 mL of water weighs about 1 g. Ethanol is less dense (0.789 g/mL), so the same volume weighs about 0.789 g – roughly 21% less.

What is the mass of 1 liter of ethanol?

Using the density 0.789 g/mL, 1 L (1000 mL) of pure ethanol has a mass of 0.789 g/mL × 1000 mL = 789 g, or 0.789 kg.

Why is ethanol’s density less than water’s?

Ethanol molecules have a shorter carbon chain and fewer hydrogen bonds per molecule than water. The molecules pack less tightly and the intermolecular forces are weaker, so the same volume contains fewer grams of ethanol than of water.

How do I convert mL of ethanol to moles?

First convert volume to mass using density (m = ρ × V), then divide by the molar mass (46.07 g/mol for C2H5OH). For 1 mL: 0.789 g ÷ 46.07 g/mol = 0.01713 mol.

Does the mass of 1 mL of ethanol change if I use a different brand?

If the product is pure ethanol (anhydrous, ≥99.8%), the density is essentially the same regardless of brand. If it is denatured or a mixture with water or other solvents, the density will differ – check the label or measure it.

Follow your lab method, the safety data sheet (SDS) and your supervisor when handling ethanol. It is flammable and should be kept away from open flames.

Related

Formula used
in d | Density of ethanol | g/mL | 0.789 | 0 | 1.5
in v | Volume | mL | 1 | 0 | 10000
out m | Mass | g | d * v | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →