molecalculator

Moles & Molar Mass

Potassium Carbonate Mass Calculator and Molar Mass

Calculator No. 01-5899 · Updated · Formula and assumptions shown below

Mass of potassium carbonate 138.205 g
Amount in millimoles
1,000 mmol
= Amount of potassium carbonate × 1000
Amount of potassium carbonate
1 mol
Set in the form below
Molar mass of K₂CO₃
138.205 g/mol
Set in the form below
You enter
Amount of potassium carbonate (mol), Molar mass of K₂CO₃ (g/mol)
You get
Mass of potassium carbonate (g), Amount in millimoles (mmol)
Rounding
3 dp · 0 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This calculator finds the mass of potassium carbonate (K₂CO₃) from a chosen amount in moles and its molar mass. Enter the amount in moles; it returns the corresponding mass in grams, with the molar mass shown as a check.

Formula

The mass of a substance is its amount in moles multiplied by its molar mass:

m = n × M

  • m is the mass of potassium carbonate, in grams (g).
  • n is the amount of potassium carbonate, in moles (mol).
  • M is the molar mass, in grams per mole (g/mol). For K₂CO₃, the default is 138.205 g/mol.

The units cancel as expected: mol × g/mol = g. The second output converts the entered amount to millimoles, using 1 mol = 1,000 mmol; it is a helpful unit check, not a separate mass calculation.

Worked Example

For the calculator’s default amount, n = 1 mol, and molar mass, M = 138.205 g/mol:

m = n × M
m = 1 mol × 138.205 g/mol
m = 138.205 g, or 138.205 g rounded to three decimal places.

The amount conversion is n × 1,000 = 1 × 1,000 = 1,000 mmol. Thus, one mole of potassium carbonate has a mass of about 138.205 g under the stated atomic-weight convention.

Assumptions

  • The formula represents pure, anhydrous potassium carbonate, K₂CO₃, rather than a hydrate or a mixture.
  • The input is the chemical amount in moles, not a volume, concentration, or number of particles.
  • The molar mass uses the stated standard atomic weights; the calculator treats that value as fixed for the calculation.
  • This is stoichiometric arithmetic. It does not account for sample moisture, impurities, weighing uncertainty, or material lost during handling.

How Potassium Carbonate’s Molar Mass Is Calculated

Potassium carbonate contains two potassium atoms, one carbon atom, and three oxygen atoms in each formula unit. Its formula is K₂CO₃: the small subscript 2 applies to potassium, while the subscript 3 applies to oxygen. Carbon has no subscript, so there is one carbon atom.

Using abridged standard atomic weights—potassium 39.0983, carbon 12.011, and oxygen 15.999—the molar mass is:

M(K₂CO₃) = 2(39.0983) + 1(12.011) + 3(15.999) = 138.2056 g/mol.

The calculator’s default, 138.205 g/mol, is a convenient rounded value. Retaining 138.2056 g/mol would change the mass only slightly: for 1 mol, the difference is 0.0006 g. A reported result should not imply greater precision than the mass measurement or the chosen atomic weights support.

Potassium carbonate is an ionic compound. In a solid, it consists of potassium ions and carbonate ions in a repeating structure; “molecule” is therefore often less precise than “formula unit.” The molar mass still works in exactly the same way: it is the mass per mole of formula units.

Using the Calculator and Choosing Units

Enter an amount in moles to get its mass in grams. For example, if a calculation calls for 0.025 mol, the mass is 0.025 × 138.205 = 3.455125 g, or about 3.455 g. For a quantity already expressed in millimoles, convert it first: 25 mmol is 25 ÷ 1,000 = 0.025 mol.

  • Moles to grams: multiply the amount in mol by 138.205 g/mol.
  • Grams to moles: divide the mass in g by 138.205 g/mol.
  • Millimoles to grams: convert mmol to mol by dividing by 1,000, then multiply by the molar mass.

For instance, 5.00 g corresponds to 5.00 ÷ 138.205 = about 0.03618 mol, or 36.18 mmol. Keep units attached to each value until they cancel; this catches common errors such as multiplying grams by g/mol when the intended operation is to find moles.

What the Mass Does—and Does Not—Tell You

The calculated mass is the amount of pure K₂CO₃ needed to represent the entered number of moles. It does not directly give solution concentration. To calculate molarity, you also need the final solution volume in litres: concentration in mol/L equals moles divided by final volume. The final volume means the volume of the completed solution, not simply the volume of water initially used.

Likewise, a balance reading gives the total mass of the sample, not necessarily the mass of pure potassium carbonate. If the material contains water or other substances, multiplying its total mass by the pure-compound conversion does not establish the actual amount of K₂CO₃ unless purity or composition is known. Potassium carbonate is hygroscopic and can absorb moisture from air, so exposed or damp material may not behave like a perfectly dry, pure sample in a precise mass calculation.

Common Mistakes and Practical Limits

  • Misreading the formula: K₂CO₃ has two K atoms and three O atoms. Omitting a subscript changes the molar mass.
  • Confusing mol and mmol: 1 mol is 1,000 mmol. A factor-of-1,000 mistake produces a mass that is wrong by the same factor.
  • Using the wrong material form: the 138.205 g/mol value is for anhydrous K₂CO₃. A hydrate, if present, has additional water in its formula and a different molar mass.
  • Over-rounding: carry a few guard digits through calculations and round the final result to match the precision of the input.
  • Assuming a calculated mass guarantees a particular result: purity, moisture, transfer losses, and measurement uncertainty can make an actual sample differ from the ideal calculation.

This calculator is for general chemistry and lab-planning arithmetic, not a substitute for a method that specifies reagent grade, sample conditioning, or uncertainty requirements. For bench work, follow your lab method, the safety data sheet (SDS), and your supervisor.

Frequently Asked Questions

What is the molar mass of potassium carbonate?
K₂CO₃ has a molar mass of about 138.205 g/mol using the atomic weights stated here. A more detailed sum with potassium at 39.0983 g/mol is 138.2056 g/mol.

How many grams are in one mole of K₂CO₃?
One mole has a mass of approximately 138.205 g. The value follows from adding the atomic masses of two potassium atoms, one carbon atom, and three oxygen atoms.

How do I convert potassium carbonate grams to moles?
Divide the mass in grams by 138.205 g/mol. For example, 10.00 g ÷ 138.205 g/mol is about 0.07235 mol.

Is potassium carbonate the same as potassium bicarbonate?
No. Potassium carbonate is K₂CO₃; potassium bicarbonate, also called potassium hydrogen carbonate, is KHCO₃. They have different formulas and molar masses, so use the value that matches the compound named in the calculation.

Does this molar mass apply to hydrated potassium carbonate?
No. The calculator assumes anhydrous K₂CO₃. A hydrate includes water in its chemical formula and therefore has a greater molar mass; identify the actual compound form before calculating.

Related

Formula used
in n | Amount of potassium carbonate | mol | 1 | 0
in mm | Molar mass of K₂CO₃ | g/mol | 138.205 | 0
out m | Mass of potassium carbonate | g | n * mm | 3
out np | Amount in millimoles | mmol | n * 1000 | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →