molecalculator

Moles & Molar Mass

Mass of Proton and Neutron in kg (Exact Values)

Calculator No. 01-7796 · Updated · Formula and assumptions shown below

The calculator on this page is switched off while it is checked. The formula is below, and the worked example shows how to do the sum by hand.

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The mass of a proton is approximately 1.67262192369 × 10−27 kg, and the mass of a neutron is approximately 1.67492749804 × 10−27 kg. These are the CODATA 2018 recommended values; in most calculations, you can round them to 1.6726 × 10−27 kg and 1.6749 × 10−27 kg respectively.

Formula

The two masses are fundamental physical constants. The difference and ratio are computed directly:

  • Δm = mneutron − mproton ≈ 2.30557435 × 10−30 kg
  • Ratio = mneutron / mproton ≈ 1.00137841931

Each mass is measured in kilograms (kg). The values above are the 2018 CODATA recommended values, which are the most precise internationally accepted estimates as of 2024.

Worked Example

Using the default values from the calculator:

  1. Enter proton mass = 1.67262192369 × 10−27 kg
  2. Enter neutron mass = 1.67492749804 × 10−27 kg
  3. Difference = 1.67492749804 × 10−27 − 1.67262192369 × 10−27 = 2.30557435 × 10−30 kg
  4. Ratio = 1.67492749804 / 1.67262192369 = 1.00137841931

The neutron is about 0.1378% heavier than the proton.

Assumptions

  • The values are for free, isolated particles at rest (not bound inside a nucleus).
  • The masses are the CODATA 2018 recommended values; newer revisions may adjust the last few digits.
  • These are rest masses, not relativistic masses.

Why the Neutron Is Heavier

Although the neutron has no net electric charge, it is slightly more massive than the proton. The reason lies in its internal composition. Both particles are made of three quarks held together by the strong force. A proton contains two up quarks and one down quark; a neutron contains one up quark and two down quarks. The down quark is intrinsically heavier than the up quark (about 4.7 MeV/c² vs. 2.2 MeV/c² in the quark-mass scheme), so swapping an up for a down adds mass. But the bulk of the mass—over 99%—comes not from the quarks themselves but from the binding energy of the gluon field and the kinetic energy of the quarks inside. The mass difference (about 1.29 MeV/c²) is what makes a free neutron unstable: it can decay into a proton, an electron, and an antineutrino, releasing that tiny excess energy.

How These Values Are Measured

You cannot simply put a single proton on a laboratory scale. Physicists measure these masses indirectly using mass spectrometry and precision Penning traps. In a Penning trap, a single ion (like a proton or a carbon nucleus) is held by electric and magnetic fields, and its cyclotron frequency is measured. Comparing the frequency of a proton to that of a carbon-12 ion gives a highly precise mass ratio. Because the mass of carbon-12 is defined as exactly 12 atomic mass units (u), the proton mass in u is known to about 10−10 relative uncertainty. Converting to kilograms requires the kilogram-to-atomic-mass-unit conversion factor, which is also measured precisely. The CODATA committee then combines all experimental results to produce the recommended values.

Common Misconceptions

  • “Protons and neutrons have exactly the same mass.” False—they differ by about 0.14%, which is enough to drive beta decay and affects nuclear stability.
  • “The mass of a nucleus is the sum of its protons and neutrons.” Not exactly. The bound nucleus is lighter than the sum of its parts because some mass is converted to binding energy (the mass defect). For example, a helium-4 nucleus is about 0.8% lighter than two free protons and two free neutrons.
  • “The kilogram standard is based on a proton.” No, the kilogram is now defined by the fixed value of the Planck constant, not by any particle mass.

Why These Numbers Matter

These tiny masses are the foundation of nuclear physics and chemistry. They appear in:

  • Calculating the energy released in nuclear reactions via E = mc² (e.g., fusion in the Sun or fission in reactors).
  • Determining the mass defect and binding energy of atomic nuclei.
  • Computing the mass of atoms and molecules when you need extreme precision, though for everyday chemistry you use atomic mass units (u) instead of kilograms.
  • Astrophysics: the proton mass sets the scale for stellar structure and the Chandrasekhar limit.

For comparison, an electron has a mass of 9.1093837015 × 10−31 kg, about 1836 times lighter than a proton. The proton mass is also the reference for the atomic mass unit: 1 u = 1.66053906660 × 10−27 kg, so a proton is about 1.007276 u and a neutron about 1.008665 u.

Frequently Asked Questions

What is the mass of a proton in grams?

1.67262192369 × 10−24 g. Since 1 kg = 1000 g, simply multiply the kilogram value by 1000. This number is often used in chemistry when converting atomic masses to grams.

Why do we use atomic mass units instead of kg for atoms?

Because the numbers are far more convenient. A proton is about 1.007 u, whereas in kilograms it is 0.0000000000000000000000000016726 kg. Atomic mass units keep the numbers manageable and directly relate to carbon-12, the standard for all atomic weights.

Does the mass of a proton change inside a nucleus?

Yes, effectively. The mass of a bound proton is not exactly the free-proton mass. The binding energy of the nucleus reduces the total mass, and the internal motion of the quarks changes slightly. However, in most nuclear calculations, physicists use the free masses and account for the mass defect separately.

How many protons and neutrons are in a kilogram of matter?

If you had pure protons, 1 kg would contain about 5.978 × 1026 protons (1 / 1.6726e-27). For neutrons, about 5.970 × 1026. In ordinary matter, you have a mix, and the total number of nucleons per kilogram depends on the element. For carbon-12, 1 kg contains about 5.02 × 1025 atoms, each with 12 nucleons, so about 6.02 × 1026 nucleons.

What is the mass difference between a neutron and a proton in MeV/c²?

About 1.293332 MeV/c². Using E = mc², the mass difference of 2.30557435 × 10−30 kg converts to 1.293332 MeV (since 1 MeV = 1.602176634 × 10−13 J). This energy is released when a free neutron decays.

Are these values exact?

No. They are measured quantities with small uncertainties. The CODATA 2018 values have relative uncertainties of about 3 × 10−10 for the proton and 2 × 10−10 for the neutron. Future experiments may refine the last few digits.

Related

Formula used
in m | Mass of proton (kg) | kg | 1.67262192369e-27 | 0
in n | Mass of neutron (kg) | kg | 1.67492749804e-27 | 0
out diff | Mass difference (neutron − proton) | kg | n - m | 24
out ratio | Neutron-to-proton mass ratio | - | n / m | 10

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →