molecalculator

Moles & Molar Mass

Mass of Sodium Bicarbonate: Molar Mass Calculator

Calculator No. 01-5900 · Updated · Formula and assumptions shown below

Amount of sodium bicarbonate 1.0000 mol
Formula units
6.022 × 1023 units
Result, rounded to a whole number
Sodium bicarbonate mass
84.0066 g
Set in the form below
Molar mass
84.0066 g/mol
Set in the form below
You enter
Sodium bicarbonate mass (g), Molar mass (g/mol)
You get
Amount of sodium bicarbonate (mol), Formula units (units)
Rounding
4 dp · 0 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molar mass of sodium bicarbonate (NaHCO₃) is 84.0066 g/mol, or about 84.01 g/mol. Enter a sample mass to calculate its amount in moles and number of formula units; the results use the compound’s formula and standard atomic weights.

Formula

The molar mass is the mass of one mole of a substance. For a sample of sodium bicarbonate, divide its mass by its molar mass:

n = m / M

  • n is amount of substance, in moles (mol).
  • m is sample mass, in grams (g).
  • M is molar mass, in grams per mole (g/mol).

The formula-unit count is N = n × NA, where N is the number of NaHCO₃ formula units and Avogadro’s exact constant is NA = 6.02214076 × 1023 mol−1. A formula unit is used for an ionic compound such as sodium bicarbonate, rather than calling each unit a molecule.

For NaHCO₃, calculate M from its atoms: Na (22.990) + H (1.008) + C (12.011) + 3 × O (15.999) = 84.006 g/mol using the listed abridged standard atomic weights. The calculator uses 84.0066 g/mol as its conventional molar-mass value; reporting 84.01 g/mol is appropriate for many everyday calculations. This small difference reflects rounding conventions, not a different compound.

Worked Example

With the default inputs, the sample mass is 84.0066 g and the molar mass is 84.0066 g/mol.

  1. Calculate the amount: n = m / M = 84.0066 g / 84.0066 g/mol = 1.0000 mol.
  2. Calculate formula units: N = n × NA = 1.0000 mol × 6.02214076 × 1023 mol−1 = 6.022 × 1023 formula units.

The calculator displays the amount to four decimal places and the formula-unit count as a whole number. The displayed particle count is rounded; it represents the same calculation at a practical precision.

Assumptions

  • The entered mass is sodium bicarbonate, NaHCO₃, rather than a mixture or a different sodium compound.
  • The molar mass is treated as 84.0066 g/mol; real material can contain moisture or impurities that affect the mass of actual NaHCO₃.
  • The formula-unit count is a theoretical count calculated from amount in moles and Avogadro’s constant.

What Molar Mass Means

Molar mass connects a count of particles to a measurable mass. One mole contains exactly 6.02214076 × 1023 specified entities. For sodium bicarbonate, those entities are formula units containing one sodium atom, one hydrogen atom, one carbon atom, and three oxygen atoms.

The numerical value of a molar mass in g/mol corresponds to the formula mass in atomic mass units, but the units describe different scales: atomic mass units apply to a particle, while grams per mole apply to a mole of particles. Thus a single NaHCO₃ formula unit has a mass of about 84 atomic mass units, while one mole has a mass of about 84 grams.

“Mass of sodium bicarbonate” can also mean the mass of a particular portion, not its molar mass. A weighed portion might be 5 g or 250 g; its mass must be measured or specified. The molar mass stays essentially fixed for the stated formula and lets you convert that sample mass to moles.

Using the Calculator and Reading the Result

Enter the sodium bicarbonate sample mass in grams. The default mass of 84.0066 g is chosen because it corresponds to exactly 1 mol when paired with the default molar mass. You can change the mass to match a problem or a recorded sample. Keep the molar mass at 84.0066 g/mol unless your calculation explicitly requires another convention or precision.

  • If the sample weighs 4.20 g, it contains about 4.20 / 84.0066 = 0.0500 mol NaHCO₃.
  • If the sample weighs 0.500 g, it contains about 0.00595 mol.
  • If the sample weighs 168.0 g, it contains about 2.000 mol.

These are mass-to-amount conversions, not predictions of how much will dissolve or react. A reaction calculation may require a balanced chemical equation and the amounts of other reactants. Solubility, purity, temperature, and the conditions of a real mixture are separate considerations.

Common Mistakes and Limits

Check that the entered mass is in grams. If a value is in milligrams, divide by 1,000 before entering it; for example, 250 mg is 0.250 g. Entering 250 as though it were grams produces a result 1,000 times too large. Likewise, do not enter a volume in millilitres as a mass. Converting a volume to mass requires a suitable density, and density depends on the material and conditions.

Another frequent mix-up is confusing molar mass with sample mass. The value 84.0066 g/mol is not the mass of every portion: it means that one mole has that mass. A 10 g sample has a smaller amount than one mole, while a 100 g sample has more.

The calculation assumes the sample mass corresponds to pure NaHCO₃. If a solid contains water or other ingredients, the total weighed mass does not reveal the exact amount of sodium bicarbonate unless its composition or purity is known. The result also does not account for measurement uncertainty; a balance reading with limited precision should not be reported as though it were exact to many decimal places. Round final values to a precision justified by the input and purpose.

Frequently Asked Questions

What is the molar mass of NaHCO₃?
The commonly used molar mass is about 84.01 g/mol. A more detailed conventional value is 84.0066 g/mol.

How many moles are in 1 gram of sodium bicarbonate?
Divide 1 g by 84.0066 g/mol: 1 g contains about 0.01190 mol NaHCO₃.

How many grams are in one mole of baking soda?
One mole of sodium bicarbonate weighs about 84.01 g, assuming pure NaHCO₃ and using the stated molar-mass convention. Baking soda is the common name for sodium bicarbonate.

Is sodium bicarbonate the same as sodium carbonate?
No. Sodium bicarbonate is NaHCO₃, with a molar mass near 84.01 g/mol. Sodium carbonate is Na₂CO₃ and has a different formula and molar mass, about 105.99 g/mol.

Does 84.01 g/mol mean every sample weighs 84.01 g?
No. It is the mass of one mole. A sample’s actual mass depends on how much material is present; use its measured mass in the calculator to find its amount in moles.

Related

Formula used
in m | Sodium bicarbonate mass | g | 84.0066 | 0
in mm | Molar mass | g/mol | 84.0066 | 0
out n | Amount of sodium bicarbonate | mol | m / mm | 4
out p | Formula units | units | n * 6.02214076e23 | 0

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →