molecalculator

Moles & Molar Mass

Nitric Oxide Molar Mass: Formula and Calculation

Calculator No. 01-3636 · Updated · Formula and assumptions shown below

Nitric oxide molar mass 30.006 g/mol
Nitrogen atomic mass
14.007 g/mol
Set in the form below
Oxygen atomic mass
15.999 g/mol
Set in the form below
You enter
Nitrogen atomic mass (g/mol), Oxygen atomic mass (g/mol)
You get
Nitric oxide molar mass (g/mol)
Rounding
3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Nitric oxide (NO) has a molar mass of 30.006 grams per mole (g/mol), commonly rounded to 30.01 g/mol. Enter the masses of nitrogen and oxygen atoms to calculate the molar mass of one NO molecule from its chemical formula.

Formula

The molar mass of a compound is the sum of the atomic masses of all atoms represented in its chemical formula. For nitric oxide, NO, the formula contains one nitrogen atom and one oxygen atom:

M(NO) = A(N) + A(O)

  • M(NO) is the molar mass of nitric oxide, in g/mol.
  • A(N) is the standard atomic mass used for nitrogen, here 14.007 g/mol.
  • A(O) is the standard atomic mass used for oxygen, here 15.999 g/mol.

The calculator adds the two atomic masses. Its defaults use conventional abridged standard atomic weights. The displayed result is rounded to three decimal places; the more precise sum from these inputs is 30.006 g/mol.

Worked Example

Using the calculator’s default values:

M(NO) = 14.007 g/mol + 15.999 g/mol = 30.006 g/mol

Therefore, the molar mass is 30.006 g/mol, or about 30.01 g/mol when rounded to two decimal places. The unit is grams per mole: one mole of nitric oxide molecules has a mass of approximately 30.006 grams.

Assumptions

  • The chemical formula is NO: one nitrogen atom and one oxygen atom per molecule.
  • The calculation uses the stated abridged atomic weights, rather than isotope-specific masses.
  • The result is a molar mass, not the mass of an individual molecule or a gas density.

What Nitric Oxide’s Formula Means

Nitric oxide is a diatomic molecule: each molecule contains two atoms, one nitrogen and one oxygen. Its formula is written NO, with no subscript after either element symbol. In chemical formulas, an omitted subscript means one atom. This is why the calculation adds each element’s atomic mass once.

It is also called nitrogen monoxide, a name that makes the one-to-one composition explicit. Do not confuse NO with nitrogen dioxide, NO2. Nitrogen dioxide has two oxygen atoms per molecule, so its molar mass is about 46.005 g/mol using the same atomic weights: 14.007 + (2 × 15.999). A changed subscript changes the number of atoms counted and therefore changes the molar mass.

Atomic weights are averages that account for the natural abundances of an element’s isotopes. As a result, a tabulated molar mass need not be a whole number, even though a molecule contains whole atoms. If a sample is deliberately enriched in a particular isotope, its isotope-specific molar mass can differ from the standard average.

Using Molar Mass in Calculations

Molar mass connects a weighed amount of a substance to an amount in moles. For pure nitric oxide, use:

n = m / M

Here, n is amount in moles, m is mass in grams, and M is molar mass in g/mol. For example, 3.000 g of NO corresponds to 3.000 g ÷ 30.006 g/mol = approximately 0.09998 mol. Conversely, a known amount in moles can be converted to mass using m = n × M.

Keep units consistent: a mass in milligrams must be converted to grams before applying the formula above, unless the molar mass is also expressed in mg/mol. Molar mass alone does not tell you the volume occupied by a gas. Gas volume depends on pressure and temperature as well as the amount of gas; under an ideal-gas approximation, those quantities are related by PV = nRT.

For work involving a nitric oxide sample, use the relevant method and consult its safety data sheet (SDS) and your supervisor. This calculator only performs a formula-mass calculation; it does not assess hazards, purity, gas behavior, or experimental conditions.

Common Mistakes and Precision

  • Using the wrong formula: NO and NO2 are different compounds. Count every subscript when summing atomic masses.
  • Mixing up mass and molar mass: 30.006 g/mol is not the mass of one molecule. It is the mass per mole of molecules.
  • Rounding too early: Keep the atomic masses and intermediate sums at useful precision, then round the final answer to match the needs of the calculation.
  • Assuming every sample has identical isotope composition: Standard atomic weights suit ordinary calculations, while isotope-specific work may require different values.

The three decimal places in the calculator reflect the chosen input values; they do not mean every physical sample can be measured to that precision. In practical work, report a result in line with the precision of the measurements and the stated atomic-weight convention. For many general chemistry problems, 30.01 g/mol is an appropriate rounded value.

Frequently Asked Questions

What is the molar mass of NO?
Using nitrogen at 14.007 g/mol and oxygen at 15.999 g/mol, NO has a molar mass of 30.006 g/mol, or about 30.01 g/mol.

How do you calculate the molar mass of nitric oxide?
Add the atomic mass of one nitrogen atom to that of one oxygen atom: 14.007 + 15.999 = 30.006 g/mol.

Is nitric oxide the same as nitrous oxide?
No. Nitric oxide is NO, with one nitrogen and one oxygen atom. Nitrous oxide is N2O, with two nitrogen atoms and one oxygen atom; its molar mass is about 44.013 g/mol using the same atomic weights.

What is the difference between NO and NO2?
NO contains one oxygen atom and has a molar mass of 30.006 g/mol. NO2 contains two oxygen atoms and has a molar mass of 46.005 g/mol using the stated values.

How many grams are in one mole of nitric oxide?
One mole of NO has a mass of approximately 30.006 g. The exact reported value depends on the atomic weights and rounding convention used.

What is the mass of one NO molecule?
Divide its molar mass by Avogadro’s constant, 6.02214076 × 1023 mol−1. Using 30.006 g/mol gives about 4.983 × 10−23 g per molecule.

Related

Formula used
in n | Nitrogen atomic mass | g/mol | 14.007 | 0
in o | Oxygen atomic mass | g/mol | 15.999 | 0
out mm | Nitric oxide molar mass | g/mol | n + o | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →