molecalculator

Moles & Molar Mass

Molar Mass of Acetone C3H6O: Calculation and Uses

Calculator No. 01-2318 · Updated · Formula and assumptions shown below

Molar mass of acetone 58.08 g/mol
Mass from amount
58.08 g
= Amount of acetone × Molar mass of acetone
Amount from mass
1.0000 mol
= Mass of acetone ÷ Molar mass of acetone
Amount of acetone
1 mol
Set in the form below
You enter
Amount of acetone (mol), Mass of acetone (g)
You get
Molar mass of acetone (g/mol), Mass from amount (g), Amount from mass (mol)
Rounding
2 dp · 4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The molar mass of acetone, C3H6O, is 58.08 g/mol using standard atomic weights. Enter the number of moles to calculate the corresponding mass of acetone in grams, or enter a mass to find the amount in moles.

Formula

Molar mass is the mass of one mole of a substance. For acetone, add the atomic weights of the atoms shown in its molecular formula:

M = 3AC + 6AH + AO

  • M is acetone’s molar mass, in grams per mole (g/mol).
  • AC is the standard atomic weight of carbon, 12.011 g/mol per mole of carbon atoms.
  • AH is the standard atomic weight of hydrogen, 1.008 g/mol.
  • AO is the standard atomic weight of oxygen, 15.999 g/mol.

The calculator also uses mass = amount × molar mass, or m = nM, and its rearrangement amount = mass ÷ molar mass, or n = m/M. Here, m is mass in grams and n is amount in moles. A mole is a fixed amount of substance, containing exactly 6.02214076 × 1023 specified entities.

Worked Example

With the default amount of 1 mol, calculate the molar mass from the atoms in one acetone molecule:

M = 3 × 12.011 + 6 × 1.008 + 1 × 15.999
M = 36.033 + 6.048 + 15.999 = 58.080 g/mol
m = nM = 1 mol × 58.080 g/mol = 58.080 g
n = m/M = 58.08 g ÷ 58.080 g/mol = 1.0000 mol

Rounded to the calculator’s two decimal places for molar mass and mass, the displayed values are 58.08 g/mol and 58.08 g. The amount calculated from the default mass is 1.0000 mol.

Assumptions

  • The formula C3H6O represents one molecule of acetone, also called propanone.
  • The calculation uses the listed abridged standard atomic weights and reports mass to the precision shown; actual samples can contain isotopes in slightly different proportions.
  • Mass and amount refer to pure acetone. The arithmetic does not account for impurities, mixtures, or measurement uncertainty.

Why Acetone’s Formula Gives This Value

The subscripts in C3H6O count atoms in each molecule: three carbon atoms, six hydrogen atoms, and one oxygen atom. The missing subscript after O means there is one oxygen atom. Each atom contributes its standard atomic weight to the molecular formula’s total, giving approximately 58.08 atomic mass units per molecule and 58.08 grams per mole.

Acetone is a small organic compound with a carbonyl group: its carbon atom is double-bonded to oxygen and bonded to two methyl groups. Its structure is often written CH3COCH3. This structural notation and C3H6O describe the same composition, so they produce the same molar mass. A different arrangement of the same atoms would have the same formula-based molar mass, even if it were a different compound.

Using Molar Mass in Calculations

Molar mass connects a substance’s measurable mass to the chemical amount used in equations. For example, if a calculation calls for 0.250 mol of acetone, multiplying by 58.08 g/mol gives 14.52 g. Conversely, a 10.0 g sample corresponds to 10.0 ÷ 58.08 = 0.1722 mol, to four significant figures.

This conversion is useful in stoichiometry, where balanced reaction equations relate amounts in moles, and in general laboratory calculations that require converting a weighed amount into moles. It does not, by itself, determine volume, concentration, reaction yield, or how much acetone is present in an unknown mixture. Those questions require additional data, such as density, solution volume, composition, or reaction information.

For a solution, molarity is moles of solute divided by the final solution volume in litres. Knowing acetone’s molar mass can help convert a measured pure mass into moles, but the calculator does not determine a solution’s molarity unless its volume and composition are also known.

Common Errors and Precision

  • Misreading the formula: C3H6O has one oxygen, not six. The 6 applies only to hydrogen.
  • Confusing molar mass with molecular mass: The numerical values are related, but their units differ. Molecular mass is commonly expressed in atomic mass units (u) per molecule; molar mass is in g/mol.
  • Mixing up grams and moles: Multiply moles by g/mol to get grams. Divide grams by g/mol to get moles.
  • Rounding too early: Keep the atomic-weight values through the calculation, then round the result to suit the precision of the measurements or the task.
  • Treating a formula as a purity check: A calculated molar mass describes pure acetone with the stated formula; it cannot establish whether a real sample is pure.

The value 58.08 g/mol is a practical result based on abridged standard atomic weights. Because natural elements contain isotopes, standard atomic weights can be reported as intervals or with more digits in some references. That extra detail rarely changes routine calculations, but a highly precise measurement should use atomic-weight data and uncertainty appropriate to the measurement.

Safety and Scope

This calculator is for chemical arithmetic, not for deciding whether acetone is safe to handle. Acetone is a highly flammable, volatile liquid; its vapour can form ignitable mixtures with air, and exposure can irritate the eyes and affect the nervous system. Keep it away from heat, sparks, and flames, avoid breathing vapour, and use suitable ventilation and protective equipment according to the applicable safety data sheet (SDS). Follow your lab method, the safety data sheet (SDS) and your supervisor. Consult the SDS for handling, storage, exposure controls, and spill response appropriate to the setting.

Frequently Asked Questions

What is the molar mass of acetone?
The molar mass of acetone, C3H6O, is approximately 58.08 g/mol using standard atomic weights.

How do you calculate the molar mass of C3H6O?
Multiply each element’s atomic weight by its subscript and add: 3 × 12.011 + 6 × 1.008 + 1 × 15.999 = 58.080 g/mol.

How many moles are in 10 grams of acetone?
Divide mass by molar mass: 10 g ÷ 58.08 g/mol = about 0.1722 mol.

Is acetone’s molecular mass the same as its molar mass?
They have nearly the same numerical value for this formula, but different units and meanings: molecular mass is expressed in u per molecule, while molar mass is expressed in g/mol.

Does acetone have another chemical name?
Yes. Acetone is also called propanone. Both names refer to the compound with formula C3H6O.

Related

Formula used
in n | Amount of acetone | mol | 1 | 0
in m | Mass of acetone | g | 58.08 | 0
out mm | Molar mass of acetone | g/mol | 3 * 12.011 + 6 * 1.008 + 1 * 15.999 | 2
out mass | Mass from amount | g | n * mm | 2
out amount | Amount from mass | mol | m / mm | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →