At 25 °C (298.15 K) and 1 atm, an ideal gas has a molar volume of about 24.47 L/mol. This calculator finds the ideal-gas molar volume from temperature and pressure; enter those conditions to get volume per mole and the equivalent value in mL/mol.
Formula
For an ideal gas, the molar volume is the gas constant multiplied by absolute temperature, divided by pressure:
Vm = RT / P
- Vm is molar volume, in L/mol.
- R is the gas constant in compatible units: 0.0820574 L·atm/(mol·K).
- T is absolute temperature in kelvin. Convert Celsius using T = t + 273.15.
- P is absolute pressure in atmospheres. Gauge pressure is not suitable unless converted to absolute pressure.
The calculator uses temperature in °C and pressure in atm, so its expression is 0.0820574 × (t + 273.15) / p. The conversion from litres to millilitres is × 1000. The gas constant is rounded here for convenient calculation; the more precise SI value is R = 8.31446261815324 J/(mol·K), equivalent to approximately 0.0820574 L·atm/(mol·K).
Worked Example
Using the defaults, t = 25 °C and p = 1 atm:
- Convert the temperature to kelvin: T = 25 + 273.15 = 298.15 K.
- Apply the ideal-gas equation: Vm = 0.0820574 × 298.15 / 1 = 24.4654 L/mol.
- Convert to millilitres: 24.4654 × 1000 = 24465.4 mL/mol.
Rounded to the calculator’s displayed precision, the answer is 24.4654 L/mol, or 24465.4 mL/mol. This is commonly stated as about 24.47 L/mol.
Assumptions
- The gas is treated as an ideal gas.
- Temperature is converted from Celsius to kelvin by adding 273.15.
- Pressure is absolute pressure, not gauge pressure.
- The pressure unit is atm and the gas constant is expressed in L·atm/(mol·K).
What Molar Volume Means
Molar volume is the volume occupied by one mole of a substance under specified conditions. For a gas, it changes when temperature or pressure changes: warming a gas at constant pressure increases its volume per mole, while increasing pressure at constant temperature decreases it. Therefore, a molar-volume value is incomplete unless its temperature and pressure are stated.
A mole is an amount of substance, not a fixed volume. At the conditions entered above, one mole of an ideal gas occupies about 24.47 L. Two moles would occupy about 48.93 L at the same temperature and pressure, provided ideal-gas behaviour remains a good approximation. The calculator reports volume per mole, rather than the total volume of a particular gas sample.
Why the Answer Depends on Conditions
The ideal gas law, PV = nRT, connects pressure (P), volume (V), amount (n), the gas constant (R), and absolute temperature (T). Divide both sides by nP to obtain V/n = RT/P. Since V/n is volume per mole, the relationship explains both the calculator and its dependence on conditions.
At 25 °C, the calculated values at some common absolute pressures are:
- 1 atm: about 24.47 L/mol.
- 1 bar: about 24.79 L/mol. One bar is 100 kPa, whereas one atmosphere is 101.325 kPa.
- 2 atm: about 12.23 L/mol, at the same temperature.
These examples use ideal-gas calculations. A value at a different pressure is not a universal replacement for the 25 °C, 1 atm figure. Always check what reference conditions a textbook, data sheet, or calculation expects.
Ideal Gas Versus Real Gas
Real gas particles have finite size and attract or repel one another. The ideal-gas model ignores these effects, and is often a useful approximation when a gas is relatively dilute and far from condensation. Deviations can become important at high pressures, low temperatures, or near a phase change. In those situations, the actual molar volume can differ from RT/P, and a real-gas equation or measured property may be needed.
There is no single correction that applies to every gas under every condition. The needed model depends on the substance and the range of temperature and pressure. Treat the calculator’s result as an ideal-gas estimate, not as a claim that a real gas occupies exactly that volume.
Using the Result and Avoiding Errors
Use molar volume when converting between an amount of gas and its volume at known conditions. If you have n moles, the ideal-gas volume is V = nVm. If you have a measured volume, n = V/Vm, as long as volume and molar volume use the same units and refer to the same temperature and pressure.
- Do not insert Celsius directly into RT/P. Convert to kelvin by adding 273.15; 25 °C is 298.15 K.
- Match pressure units to R. This calculator takes atm. If your pressure is in kPa, convert it using 1 atm = 101.325 kPa before entry.
- Use absolute pressure. A gauge reading is relative to ambient pressure; add local atmospheric pressure to obtain absolute pressure.
- Do not confuse molar volume with sample volume. Multiply by the number of moles to get the sample’s ideal-gas volume.
- Keep conditions consistent. A gas volume measured at one pressure and temperature cannot be converted with a molar volume calculated for other conditions without accounting for the change.
For pressure expressed in kPa, an equivalent form is Vm = 8.31446261815324 × T / P, with Vm in L/mol and P in kPa. The constant has those units because 1 kPa·L = 1 J. Do not combine this version with pressure in atm; mixing units produces a wrong result even if the arithmetic is correct.
Frequently Asked Questions
What is the molar volume of a gas at 25 °C and 1 atm?
For an ideal gas, it is about 24.47 L/mol (24470 mL/mol to three significant figures). Real gases may differ slightly, depending on the gas and conditions.
Is molar volume at 25 °C always 24.47 L/mol?
No. That figure assumes 1 atm and ideal-gas behaviour. At a different pressure, temperature, or for a real gas, the value can change.
What is the molar volume at 25 °C and 1 bar?
The ideal-gas value is about 24.79 L/mol. One bar is slightly less than one atmosphere, so the volume per mole is slightly larger at the same temperature.
Why do some sources give a different gas molar volume?
They may use different reference temperatures or pressures, distinguish between one bar and one atmosphere, or use a real-gas value rather than an ideal-gas estimate. Compare the stated conditions before comparing numbers.
How do I calculate gas volume from moles at 25 °C?
At 1 atm, multiply the amount in moles by approximately 24.47 L/mol. For example, 0.50 mol occupies about 12.23 L in the ideal-gas model at those conditions.
Can I use this calculator for a liquid or solid?
No. The formula is for a gas modelled by the ideal gas law. Liquids and solids need substance-specific density or molar-volume data.
Related
Formula used
in t | Temperature | °C | 25 | -273.15 in p | Pressure | atm | 1 | 0.000001 out vm | Molar volume | L/mol | 0.0820574 * (t + 273.15) / p | 4 out vmml | Molar volume | mL/mol | vm * 1000 | 1
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s