molecalculator

Moles & Molar Mass

Molarity and Mass per Volume: Formula and Calculator

Calculator No. 01-4813 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This calculator converts the mass of a dissolved substance and the solution’s final volume into molarity, with a millimolar result as a second output. Enter the solute mass in grams, its molar mass in grams per mole, and the final solution volume in milliliters.

Formula

Molarity is the amount of solute in moles divided by the total volume of the solution in liters. When the given mass is in grams and molar mass is in grams per mole, the formula is:

M = (m / MM) / (V / 1000)

  • M is molarity, in mol/L.
  • m is the mass of solute, in grams.
  • MM is the solute’s molar mass, in g/mol.
  • V is the final solution volume, in mL. Dividing by 1000 converts milliliters to liters.

The calculator’s second output is millimolar concentration: mM = M × 1000, since 1 mol/L equals 1000 mmol/L. In words, first divide mass by molar mass to find moles; then divide those moles by final volume in liters.

Worked Example

Using the calculator’s default values—2.922 g of solute, molar mass 58.44 g/mol, and final volume 250 mL:

  1. Convert mass to amount: 2.922 g / (58.44 g/mol) = 0.050000 mol.
  2. Convert volume: 250 mL / 1000 = 0.250 L.
  3. Divide amount by volume: 0.050000 mol / 0.250 L = 0.2000 mol/L.
  4. Convert to millimolar: 0.2000 mol/L × 1000 = 200.00 mM.

The result is 0.2000 M, or 200.00 mM. The units reduce to mol/L, as required.

Assumptions

  • The volume entered is the final volume of the whole solution, not the amount of solvent used.
  • The entered mass is the mass of the specified solute, and the molar mass matches its chemical form.
  • The calculation is a concentration conversion; it does not account for purity, chemical reaction, dissociation, or volume changes unless those are reflected in the inputs.

What Molarity and Mass per Volume Mean

Molarity, also called amount concentration, describes how many moles of a substance are present in each liter of solution. Its standard unit is mol/L, often written M. For example, a 0.20 M solution contains 0.20 mol of the stated solute per liter of final solution. It does not mean 0.20 mol per liter of solvent.

Mass per volume concentration instead reports a mass of solute per volume of solution, such as g/L or mg/mL. These are different ways to describe concentration: molarity counts chemical amount, while mass per volume measures mass. Molar mass links the two. For a given substance, multiply molarity in mol/L by molar mass in g/mol to obtain g/L. Conversely, divide g/L by g/mol to obtain mol/L.

For the worked example, 0.2000 mol/L × 58.44 g/mol = 11.688 g/L. This is also 11.688 mg/mL because 1 g/L equals 1 mg/mL. The numerical result changes with the selected unit, but the physical concentration does not.

When to Use This Conversion

Use the formula when a known solute mass and molar mass need to be expressed as molarity, or when checking the concentration implied by a solution’s mass and final volume. It is useful in general chemistry calculations, solution-concentration exercises, and lab-planning arithmetic. It can also be rearranged to find a required solute mass:

m = M × V(L) × MM

For instance, to calculate a mass from a target molarity, use volume in liters and molar mass in g/mol; the resulting mass is in grams. This rearrangement calculates an amount on paper, not a laboratory procedure. For bench work, follow your lab method, the safety data sheet (SDS) and your supervisor.

Mass per Volume Compared with Molarity

Neither expression is universally more useful. Mass per volume is straightforward for weighing and reporting material by mass. Molarity is often more convenient for reaction equations because stoichiometric coefficients describe ratios of moles, not grams. Converting between them requires the identity and chemical form of the solute, since different substances have different molar masses.

For example, 10 g/L corresponds to different molarities for a substance with a molar mass of 50 g/mol and one with a molar mass of 100 g/mol: 0.20 mol/L in the first case and 0.10 mol/L in the second. A mass concentration alone does not determine molarity unless the correct molar mass is known.

Common Errors and Limits

  • Using solvent volume: use the final volume after solute and solvent make the solution. Adding solute to 250 mL of solvent does not necessarily produce 250 mL of solution.
  • Skipping the mL-to-L conversion: molarity uses liters. The calculator explicitly divides the entered volume in mL by 1000.
  • Entering a mass concentration as mass: the mass input is grams of solute, not g/L or mg/mL. If you start with a mass-per-volume value, first establish the total solute mass for the relevant final volume.
  • Using the wrong molar mass: check the formula, hydration state, and chemical form. A hydrated compound and its anhydrous form have different molar masses.
  • Rounding too early: retain useful digits in intermediate steps, then round the final result to a precision justified by the measurements.

The calculation assumes the mass and molar mass refer to the same solute and that the stated final volume is meaningful for the solution. It does not infer purity, correct for a reaction, or establish how much of a solute is chemically available. If a reagent is impure, the effective amount may be lower than its weighed mass implies; use an appropriate purity correction only when it is known and relevant.

Frequently Asked Questions

How do you convert g/L to molarity?
Divide the concentration in g/L by the molar mass in g/mol. The units reduce to mol/L. For example, 11.688 g/L divided by 58.44 g/mol equals 0.2000 mol/L.

How do you convert molarity to grams per liter?
Multiply molarity in mol/L by molar mass in g/mol. A 0.2000 M solution of a substance with molar mass 58.44 g/mol corresponds to 11.688 g/L.

Is molarity the same as mass concentration?
No. Molarity is moles per liter; mass concentration is mass per volume, often g/L. Convert between them using the solute’s molar mass.

Does the volume mean solvent volume or solution volume?
It means the final volume of the solution, including the dissolved solute. The volume of solvent added may differ from the final solution volume.

Can I calculate molarity from mass and volume alone?
Not unless you also know the solute’s molar mass. The same mass and volume can represent different numbers of moles for different substances.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →