The molecular weight of ethanol (C2H5OH) is 46.07 g/mol. This value is the sum of the atomic weights of two carbon atoms, six hydrogen atoms, and one oxygen atom, using the IUPAC standard atomic weights.
Formula
The molecular weight (molar mass) of a compound is calculated by summing the atomic weights of each element multiplied by the number of atoms of that element in the molecular formula. For ethanol, C2H5OH (often written C2H6O):
M(C2H5OH) = 2 × Ar(C) + 6 × Ar(H) + 1 × Ar(O)
- Ar(C) = 12.011 g/mol (carbon)
- Ar(H) = 1.008 g/mol (hydrogen)
- Ar(O) = 15.999 g/mol (oxygen)
Plugging in the values: 2(12.011) + 6(1.008) + 15.999 = 24.022 + 6.048 + 15.999 = 46.069 g/mol, which rounds to 46.07 g/mol.
Worked Example
Using the calculator defaults: you have 46.07 g of ethanol (exactly one mole) and want to dissolve it in a final volume of 1000 mL (1 L).
First, convert volume to liters: 1000 mL ÷ 1000 = 1.000 L.
Then apply the molarity formula: Molarity (mol/L) = mass (g) ÷ molar mass (g/mol) ÷ volume (L).
c = 46.07 g ÷ 46.07 g/mol ÷ 1.000 L = 1.000 mol/L.
The calculator shows 1.0000 mol/L (4 decimal places). The millimolar output is 1000.00 mM (since 1 mol/L = 1000 mM).
Assumptions
- The ethanol is pure (100% anhydrous). If you start with a diluted solution, adjust the mass accordingly.
- Atomic weights are the IUPAC abridged standard values; variations in isotopic composition are negligible for normal lab work.
- The final volume is the total solution volume, not the volume of solvent added. When preparing a solution, you dissolve the solute in less solvent and then bring the total volume to the mark.
- Temperature is 25 °C (standard conditions for molarity); density changes with temperature, but molar mass does not.
Why Ethanol’s Molecular Weight Matters
Ethanol is one of the most common organic solvents in chemistry and biology labs. Knowing its molecular weight lets you prepare solutions of exact molarity, convert between mass and moles for reactions, and calculate concentrations for spectroscopy, fermentation studies, or buffer preparations. For example, if a protocol calls for 0.5 M ethanol, you need 0.5 × 46.07 = 23.035 g of pure ethanol per liter of final solution.
Ethanol is also the active ingredient in alcoholic beverages, and its molecular weight is used in forensic and food chemistry to convert blood alcohol concentration (often expressed as mass/volume) to molar units for enzymatic assays.
Common Mistakes and How to Avoid Them
- Confusing molecular weight with density: Ethanol has a density of about 0.789 g/mL at 25 °C. You cannot use density as a substitute for molar mass when calculating moles. If you measure ethanol by volume, convert to mass first (mass = volume × density).
- Forgetting the hydrogen atoms on the hydroxyl group: The formula C25OH has 6 hydrogens total, not 5. A common error is using Ar(H) = 5 instead of 6, giving 45.06 g/mol.
- Using the wrong unit for volume: Molarity is moles per liter. If you measure volume in mL, divide by 1000 before using the formula. The calculator does this automatically.
- Rounding too early: Use at least 4 significant figures in intermediate steps. Rounding 12.011 to 12 and 1.008 to 1 gives 46 g/mol, which is fine for rough work but not for precise solution prep.
Ethanol vs. Other Common Alcohols
Ethanol (C2H5OH, MW 46.07) is the simplest alcohol with two carbons. Methanol (CH3OH) has a molecular weight of 32.04 g/mol, while propanol (C3H7OH) has 60.10 g/mol. The difference of 14.03 g/mol between successive alcohols corresponds to an added CH2 group (12.011 + 2×1.008 = 14.027). This pattern is useful for identifying unknown alcohols by mass spectrometry.
Compared to water (18.015 g/mol), ethanol is heavier, which explains why ethanol vapor is denser than air and why ethanol solutions have different boiling points than pure water.
How to Use the Calculator
This calculator computes the molarity of an ethanol solution given the mass of solute, its molar mass, and the final volume. Enter the mass in grams (default 46.07 g, one mole), the molar mass in g/mol (default is ethanol’s, but you can change it for any solute), and the final volume in milliliters. The first output is the molarity in mol/L, and the second is the same concentration in millimolar (mM).
To use it for a different solute, simply update the molar mass. For example, for sodium chloride (NaCl, MW 58.44 g/mol), enter 58.44 in the molar mass field and the mass you have.
Limitations and Practical Notes
The formula assumes ideal behavior, which is accurate for dilute solutions. For concentrated ethanol solutions (above about 1 M), the volume may not be exactly additive when mixing with water due to contraction, so always prepare to a final volume in a volumetric flask rather than adding 1 L of water to the solute.
For reactions, remember that ethanol is often used as a solvent and can participate in reactions (e.g., esterification, oxidation). Its molecular weight is also used to calculate the theoretical yield of products when ethanol is a reactant.
When working in the lab, always follow your lab method, the safety data sheet (SDS) and your supervisor. Ethanol is flammable and should be handled away from open flames.
Frequently Asked Questions
What is the difference between molecular weight and molar mass?
Molecular weight (often called molecular mass) is the mass of one molecule relative to the unified atomic mass unit (u), and molar mass is the mass of one mole of molecules in grams. For ethanol, both have the same numerical value (46.07), but molecular weight is unitless (or in u) while molar mass is in g/mol. In practice, chemists use the terms interchangeably.
How do I calculate the molecular weight of ethanol from its structural formula?
Write the molecular formula C2H5OH, count the atoms: 2 carbons, 6 hydrogens, 1 oxygen. Multiply each element’s atomic weight by its count and sum: 2×12.011 + 6×1.008 + 15.999 = 46.069 g/mol.
Why is ethanol’s molecular weight sometimes given as 46.07 and sometimes 46.069?
The difference is rounding. The IUPAC standard atomic weights are 12.011, 1.008, and 15.999, giving 46.069. Many textbooks round to 46.07 for simplicity. For precise work, use 46.069 g/mol.
Is the molecular weight of ethanol the same as its equivalent weight?
No. Equivalent weight depends on the reaction. For ethanol, which has no acidic hydrogen in most contexts, the equivalent weight is not defined. In redox reactions, it can vary. Molecular weight is a fixed property of the molecule.
How many moles are in 100 g of ethanol?
Divide mass by molar mass: 100 g ÷ 46.07 g/mol = 2.171 moles. This is useful for stoichiometry.
Does ethanol have a molecular weight of 46 in mass spectrometry?
Yes, the monoisotopic mass of the most abundant isotope combination (C2H6O) is 46.042, but the average molecular weight is 46.07. Mass spectrometers often report the monoisotopic mass, which is slightly lower.
Related
Formula used
in m | Mass of ethanol | g | 46.07 | 0 in mm | Molar mass | g/mol | 46.07 | 0.001 in v | Final solution volume | mL | 1000 | 0.001 out c | Molarity | mol/L | m / mm / (v / 1000) | 4 out cmm | Concentration in millimolar | mM | c * 1000 | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- ug to ppb Calculator: Convert Micrograms per Liter1.00 ppb
- Grams to Moles Chemistry: How to Convert0.2000 mol/L
- Convert ug/l to ppb Calculator
- CPP Calculator Ontario: How CPP Is Calculated162.12 $/month
- Grams to Moles to Molecules: How to Convert0.2000 mol/L
- Organic Chemistry Reaction Calculator: How It Works