molecalculator

Moles & Molar Mass

Moles, Concentration, and Volume Calculator

Calculator No. 01-5483 · Updated · Formula and assumptions shown below

Molarity 0.2000 mol/L
Concentration in millimolar
200.00 mM
= Molarity × 1000
Mass of solute
2.922 g
Set in the form below
Molar mass
58.44 g/mol
Set in the form below
You enter
Mass of solute (g), Molar mass (g/mol), Final solution volume (mL)
You get
Molarity (mol/L), Concentration in millimolar (mM)
Rounding
4 dp · 2 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

This calculator finds the molar concentration of a solution from the solute’s mass, molar mass, and final solution volume. Enter mass in grams, molar mass in grams per mole, and volume in millilitres; it returns concentration in mol/L and millimolar (mM).

Formula

Molarity is the number of moles of solute divided by the final volume of solution in litres:

C = n / V = (m / M) / (VmL / 1000)

  • C is molar concentration in mol/L, also written M.
  • n is amount of solute in moles.
  • m is solute mass in grams.
  • M is molar mass in g/mol.
  • VmL is final solution volume in mL. Dividing by 1000 converts millilitres to litres.

The amount of substance comes from n = m / M. To express the answer in millimolar, use concentration (mM) = C × 1000, because 1 mol/L equals 1000 mmol/L. The calculator assumes the entered mass is the mass of the solute and that the stated volume is the final volume of the complete solution.

Worked Example

Using the defaults: 2.922 g solute, molar mass 58.44 g/mol, and final volume 250 mL.

  1. Find the amount of solute: n = 2.922 g / 58.44 g/mol = 0.050000 mol.
  2. Convert final volume to litres: 250 mL / 1000 = 0.250 L.
  3. Divide moles by volume: C = 0.050000 mol / 0.250 L = 0.2000 mol/L.
  4. Convert to millimolar: 0.2000 mol/L × 1000 = 200.00 mM.

The calculator therefore reports 0.2000 mol/L, or 200.00 mM, for these inputs.

Assumptions

  • The entered volume is the final solution volume, not the volume of solvent used.
  • The solute mass and molar mass refer to the same chemical substance and form.
  • The calculation reports analytical molarity; it does not account for reaction, dissociation, purity, or activity effects.
  • For any bench work, follow your lab method, the safety data sheet (SDS), and your supervisor.

How Moles, Concentration, and Volume Relate

A mole is a unit for counting particles. One mole contains exactly 6.02214076 × 1023 specified entities, such as molecules, atoms, or formula units. In routine solution calculations, the particle count is usually not needed directly: mass and molar mass provide the amount in moles.

Concentration describes how much solute is present relative to a defined amount of solution. Molarity uses moles per litre, so increasing the amount of solute at fixed volume increases concentration. Increasing final volume while keeping the same moles decreases concentration. Rearranging the same relationship gives n = C × V and V = n / C, with volume in litres when concentration is in mol/L.

For example, 0.0500 mol in 0.250 L gives 0.200 mol/L. The same amount in 0.500 L gives 0.100 mol/L. This does not mean that adding 250 mL of solvent always halves a solution’s concentration: the final volume may not equal the original volume plus the solvent volume, because volumes can change on mixing. Use the measured or specified final solution volume.

When to Use the Calculator

Use this calculation when you know a solute’s mass, its molar mass, and the final volume, and need its molar concentration. It is useful for checking classroom chemistry problems and planning general, non-hazardous laboratory calculations. The inverse relationships are helpful when a problem instead gives concentration and volume and asks how many moles are present.

To choose a molar mass, use the value for the exact substance represented in the calculation. For a compound, add the atomic weights in its formula, accounting for each atom’s count. For example, water, H2O, has a molar mass of approximately 18.015 g/mol using H = 1.008 and O = 15.999. Hydrates, salts with different counterions, and different molecular forms can have different molar masses.

Units and Common Mistakes

  • Leaving volume in mL: molarity is in mol/L. Convert mL to L by dividing by 1000 before dividing moles by volume.
  • Using solvent volume instead of final volume: solutions are specified by the total volume after solute and solvent are combined, unless a problem explicitly defines another quantity.
  • Confusing moles with molarity: moles measure amount; mol/L measures amount per volume. A value in mol cannot be substituted directly for a value in mol/L.
  • Using a mismatched molar mass: check the formula, hydration state, and chemical form. A wrong molar mass changes the calculated moles and concentration.
  • Rounding too early: retain extra digits in intermediate steps, then round the final result to suit the precision of the measurements. More calculator digits do not make the input measurements more precise.

Concentration units can also be reported as mmol/L, µmol/L, or mass per volume, such as g/L. Convert units explicitly rather than treating them as interchangeable. In particular, mg/mL is a mass concentration, not a molar concentration; converting between them requires the solute’s molar mass.

Limits and Interpretation

This formula calculates the amount added per final volume from the supplied values. It does not determine how much of a substance remains after a chemical reaction, whether a substance dissolves completely, or the concentration of a particular ion after dissociation. If a solute reacts, precipitates, or has a purity below 100%, the actual dissolved concentration may differ from this simple mass-based result.

Molarity is defined using solution volume, which can vary with temperature. In precise work, use the volume and temperature conventions required by the relevant method. For dilute solutions, molarity is often used directly in stoichiometric calculations; thermodynamic behavior may require activity rather than concentration. Those effects are outside this calculator’s scope.

Frequently Asked Questions

How do I calculate moles from concentration and volume?
Multiply molarity in mol/L by volume in litres: n = C × V. Convert a volume in millilitres to litres by dividing by 1000 first.

How do I calculate volume from moles and concentration?
Rearrange the relationship to V = n / C. If n is in moles and C is in mol/L, the result is in litres.

Is molarity the same as moles?
No. Moles are an amount of substance, while molarity is an amount per unit volume, usually mol/L.

Does solution volume mean the amount of water added?
No. It means the final volume of the entire solution. The solvent volume can differ from the final volume after the solute dissolves.

How many millimolar are in one molar?
One mol/L equals 1000 mmol/L, or 1000 mM.

Related

Formula used
in m | Mass of solute | g | 2.922 | 0
in mm | Molar mass | g/mol | 58.44 | 0.001
in v | Final solution volume | mL | 250 | 0.001
out c | Molarity | mol/L | m / mm / (v / 1000) | 4
out cmm | Concentration in millimolar | mM | c * 1000 | 2

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →