molecalculator

Moles & Molar Mass

Neutron Mass vs Electron: Exact Ratio

Calculator No. 01-8042 · Updated · Formula and assumptions shown below

Mass ratio (mₙ/mₑ) 1,838.6837
Mass difference (mₙ − mₑ)
1.674 × 10−27 ×10⁻³¹ kg
Result, rounded to 6 decimal places
Neutron mass
1.674927498 ×10⁻²⁷ kg
Set in the form below
Electron mass
9.1093837139 ×10⁻³¹ kg
Set in the form below
You enter
Neutron mass (×10⁻²⁷ kg), Electron mass (×10⁻³¹ kg)
You get
Mass ratio (mₙ/mₑ), Mass difference (mₙ − mₑ) (×10⁻³¹ kg)
Rounding
4 dp · 6 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The neutron is about 1,838.68 times more massive than the electron. In kilograms, the neutron rest mass is 1.67492749804 × 10−27 kg, while the electron rest mass is 9.1093837139 × 10−31 kg; dividing the two gives the ratio. This page explains the exact values, where they come from, and why the difference matters in nuclear physics and chemistry.

Formula

The neutron-to-electron mass ratio is simply the rest mass of a neutron divided by the rest mass of an electron:

Ratio = mn / me

  • mn = neutron rest mass = 1.67492749804 × 10−27 kg
  • me = electron rest mass = 9.1093837139 × 10−31 kg

Both values are the CODATA 2018 recommended values. The ratio is dimensionless, so it has no units. The calculator above lets you use your own values if you are working with a different source or a specific isotope context.

Worked Example

Using the defaults from the calculator:

mn = 1.67492749804 × 10−27 kg
me = 9.1093837139 × 10−31 kg

Ratio = (1.67492749804 × 10−27) / (9.1093837139 × 10−31)

First, divide the mantissas: 1.67492749804 / 9.1093837139 ≈ 0.18386

Then divide the powers of ten: 10−27 / 10−31 = 104

Ratio ≈ 0.18386 × 104 = 1838.6

More precisely, the CODATA value is 1838.68366173. The calculator rounds to 1838.6837 with four decimal places.

Assumptions

  • Rest masses are used, meaning the particles are at rest relative to the observer.
  • Values are the CODATA 2018 internationally recommended constants.
  • No binding energy or relativistic corrections are applied, because these are free-particle masses.

Why the Mass Difference Matters

The neutron is not a fundamental particle; it is made of three quarks (two down, one up) held together by gluons. Most of its mass comes not from the quarks themselves but from the binding energy of the strong force. The electron, in contrast, is a fundamental lepton with no internal structure. This explains why the neutron is so much heavier than the electron.

In atoms, the electron mass is often ignored when calculating the mass of an atom because it is so small relative to the nucleus. For example, a carbon-12 atom has a mass of exactly 12 atomic mass units (u), where 1 u = 1.66053906660 × 10−27 kg. The six electrons contribute only about 0.0033 u, or 0.03% of the total mass. Chemists routinely ignore electron mass when working with molar masses.

However, the electron mass is critical in other contexts, such as the Bohr magneton, the fine-structure constant, and the behavior of electrons in electric fields. The ratio mn/me appears in some quantum electrodynamic calculations and in the theoretical prediction of the neutron’s magnetic moment.

How the Masses Are Measured

The electron mass is measured using Penning traps, where a single electron is held in a magnetic field and its cyclotron frequency is measured. The frequency depends on the charge-to-mass ratio, and with the known charge, the mass is extracted to high precision.

The neutron mass is trickier because neutrons are not charged and cannot be trapped the same way. Instead, physicists measure the neutron mass using mass spectrometry of the deuteron (a proton plus a neutron) and then subtracting the proton mass and the binding energy. The binding energy is known from the gamma-ray energy emitted when a proton captures a neutron to form deuterium. This indirect method gives the neutron mass to about 10−8 relative uncertainty.

Common Misconception: Mass and Weight

A frequent confusion is between mass and weight. The mass ratio is the same everywhere in the universe: a neutron has 1838.68 times the mass of an electron, whether on Earth, on the Moon, or in deep space. Weight, however, depends on gravitational field strength. If you could weigh a neutron and an electron on a scale, the neutron would weigh 1838.68 times more on the same planet, but the actual weight values would differ on different planets. In physics and chemistry, mass is the intrinsic property, and weight is a force.

Practical Use in Nuclear Equations

When balancing nuclear reactions, you often need to account for the mass difference between reactants and products to find the energy released via E = mc2. For example, in beta decay, a neutron converts into a proton, an electron, and an antineutrino. The mass of the neutron is slightly greater than the sum of the proton and electron masses, and that difference (about 1.25 × 10−32 kg) is released as kinetic energy of the products.

In such calculations, the electron mass is not negligible because it appears explicitly in the decay products. However, when calculating atomic masses, the electron masses are often included in the total, so you must be careful not to double-count them. The ratio mn/me helps you quickly estimate whether an electron mass matters in a given context.

Frequently Asked Questions

Is the neutron exactly 1840 times the electron mass?

No, it is approximately 1838.68 times, not 1840. The approximate value 1840 is often used in textbooks for quick mental arithmetic, but the exact ratio is slightly less. Using 1840 introduces an error of about 0.07%, which is acceptable for rough estimates but not for precise calculations.

Why is the neutron heavier than the proton if both contain quarks?

The neutron is about 0.1% heavier than the proton (1.6749 × 10−27 kg vs 1.6726 × 10−27 kg). This difference comes from the slight mass difference between up and down quarks and from electromagnetic binding energy. The down quark is heavier than the up quark, and the neutron has two down quarks while the proton has two up quarks, so the neutron ends up heavier.

Do electrons have any mass at all?

Yes, electrons have a rest mass of about 9.109 × 10−31 kg. They are not massless like photons. However, because their mass is so small, they can reach relativistic speeds with modest energies, which is why electron behavior in accelerators is often treated with special relativity.

How many electrons equal one neutron?

Approximately 1838.68 electrons would have the same mass as one neutron. This is just the inverse of the ratio: 1 / 1838.68 ≈ 0.0005439 neutrons per electron, so about 1839 electrons are needed to match one neutron’s mass.

Does the neutron mass change when it is inside an atom?

Yes, slightly. When a neutron is bound in a nucleus, its effective mass is reduced by the binding energy. The total mass of a nucleus is less than the sum of its individual nucleons’ masses. This mass defect is the source of nuclear binding energy. However, the free neutron mass is the standard reference value used in calculations.

Why is the electron mass not just zero in atomic mass calculations?

Because atomic masses are defined for neutral atoms, which include electrons. The atomic mass unit (u) is defined as 1/12 of the mass of a carbon-12 atom, which includes six electrons. When you convert between atomic mass units and kilograms, the electron mass is already included. For nuclear reactions, you often use nuclear masses (without electrons) to avoid confusion, but for chemical molar masses, the electron contribution is negligible for most purposes.

Related

Formula used
in m_n | Neutron mass | ×10⁻²⁷ kg | 1.67492749804 | 0
in m_e | Electron mass | ×10⁻³¹ kg | 9.1093837139 | 0
out ratio | Mass ratio (mₙ/mₑ) | - | m_n * 1e-27 / (m_e * 1e-31) | 4
out diff | Mass difference (mₙ − mₑ) | ×10⁻³¹ kg | m_n * 1e-27 - m_e * 1e-31 | 6

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →