Nickel has the atomic number 28, and its electron configuration is 1s2 2s2 2p6 3s2 3p6 3d8 4s2, often abbreviated as [Ar] 3d8 4s2. This arrangement places 28 electrons around the nucleus, with the outermost shell (n=4) containing two electrons in the 4s subshell.
Formula and Notation
The electron configuration is built using the Aufbau principle, which fills orbitals in order of increasing energy: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, and so on. For nickel (Z = 28), the order is:
- 1s2 (2 electrons)
- 2s2 2p6 (8 electrons)
- 3s2 3p6 (8 electrons)
- 4s2 (2 electrons)
- 3d8 (8 electrons)
The shorthand [Ar] 3d8 4s2 uses the noble gas argon (Z = 18) to represent the first 18 electrons. The superscripts add to 28: 2 + 8 + 8 + 2 + 8 = 28.
Worked Example
Using the default inputs (Z = 28):
- Count electrons: 28.
- Fill 1s: 2 electrons (total 2).
- Fill 2s: 2 electrons (total 4).
- Fill 2p: 6 electrons (total 10).
- Fill 3s: 2 electrons (total 12).
- Fill 3p: 6 electrons (total 18).
- Fill 4s before 3d: 2 electrons (total 20).
- Fill 3d with the remaining 8 electrons (total 28).
Result: 1s2 2s2 2p6 3s2 3p6 3d8 4s2. Electrons per shell: 2, 8, 16, 2 (shells K, L, M, N). Valence electrons: 2 (the 4s2 electrons).
Assumptions
- The Aufbau principle applies without exceptions for nickel.
- The configuration is for a neutral, ground-state atom.
- Orbital energies follow the standard (n + l) rule; nickel does not exhibit the 3d9 4s1 anomaly seen in chromium or copper.
Why Nickel’s Configuration Matters
Nickel’s electron arrangement explains its chemical behavior. The two 4s electrons are the most loosely held, so nickel typically forms +2 ions (losing both 4s electrons) and sometimes +3 ions (losing one 3d electron as well). The partially filled 3d subshell gives nickel its magnetic properties and its ability to form colored compounds, such as the green Ni2+ ion in aqueous solution. This configuration also makes nickel a good catalyst for hydrogenation reactions, as the d-orbitals can accept and donate electron density.
Common Misconceptions and Errors
A frequent mistake is writing 3d8 4s2 as 4s2 3d8 in the wrong order. While the 4s fills first, the 3d is lower in energy once occupied, so the standard notation lists 3d before 4s. Another error is confusing the number of valence electrons: nickel has 2 (from 4s), not 10 (which would include the 3d electrons). For transition metals, “valence” often refers only to the outermost s electrons. Also, some periodic tables show nickel as [Ar] 3d9 4s1 in excited states, but the ground state is always 3d8 4s2.
How to Use the Calculator
Enter any atomic number from 1 to 118. The calculator returns the ground-state configuration for that element, the electrons per shell, and the number of valence electrons (the s electrons in the highest principal quantum number). For most elements this follows the Aufbau rule, but note that exceptions exist (e.g., chromium, copper, niobium, molybdenum, ruthenium, rhodium, palladium, silver, platinum, gold) where a d5 or d10 half-filled or fully filled subshell is favored. The calculator does not account for these exceptions; it assumes the ideal Aufbau order. For nickel, the result is correct.
Nickel in the Periodic Table
Nickel (symbol Ni) sits in period 4, group 10, between cobalt (Z = 27) and copper (Z = 29). Its atomic mass is 58.693 u. It is a silvery-white metal, hard, ductile, and resistant to corrosion. Nickel is one of the four elements (iron, cobalt, nickel, gadolinium) that are ferromagnetic at room temperature. Its electron configuration explains why it is in group 10: the group number corresponds to the sum of the 3d and 4s electrons (8 + 2 = 10). The element is widely used in stainless steel, alloys, batteries, and coins.
Frequently Asked Questions
What is the electron configuration of Ni2+?
When nickel loses two electrons to form Ni2+, it loses the two 4s electrons first, so the configuration becomes [Ar] 3d8. This is because the 4s orbital is higher in energy than the 3d once the atom is ionized. The Ni2+ ion has 26 electrons.
Why is nickel’s configuration written as 3d8 4s2 instead of 4s2 3d8?
The notation lists subshells in order of increasing principal quantum number (n) for clarity, even though the 4s fills before the 3d during the Aufbau process. After filling, the 3d electrons are lower in energy, so they are written first in the standard configuration to reflect the actual orbital energy order.
How many unpaired electrons does nickel have?
In the ground state, nickel has two unpaired electrons. The 3d subshell has 8 electrons: the first five occupy each orbital singly (spin up), then the next three pair up in three orbitals, leaving two orbitals with one unpaired electron each. This gives nickel a paramagnetic contribution, but its ferromagnetism arises from the collective alignment of these unpaired spins in the solid state.
Is nickel’s electron configuration an exception to the Aufbau principle?
No, nickel follows the standard Aufbau order exactly. The exceptions are elements like chromium (3d5 4s1) and copper (3d10 4s1), where a half-filled or fully filled d subshell is especially stable. Nickel’s 3d8 4s2 is the expected configuration.
What are the valence electrons for nickel?
For transition metals, the valence electrons are typically the electrons in the outermost shell, which for nickel are the two 4s electrons. Some textbooks also include the 3d electrons when discussing bonding, but for chemical reactivity, the 4s electrons are lost first. Thus nickel commonly shows a +2 oxidation state.
How does the electron configuration affect nickel’s color?
The partially filled 3d orbitals allow d-d transitions when visible light is absorbed. In aqueous solution, Ni2+ appears green because it absorbs light in the red and blue regions and transmits green. The exact color depends on the ligands surrounding the nickel ion, a topic in crystal field theory.
Limitations and Further Reading
This calculator provides the ground-state configuration for neutral atoms using the Aufbau principle. It does not predict ionization energies, orbital diagrams, or the configurations of ions. For ions, remove electrons from the 4s before the 3d (for transition metals). For a deeper understanding, study Hund’s rule, the Pauli exclusion principle, and the Madelung rule. Remember that electron configurations are a model—they describe the most probable distribution of electrons and are confirmed by spectroscopy.
Related
Formula used
in z | Atomic number Z | - | 28 | 1 | 118 out ec | Electron configuration | - | "1s2 2s2 2p6 3s2 3p6 3d8 4s2" | 0 out es | Electrons per shell | - | "2, 8, 16, 2" | 0 out v | Valence electrons | - | 2 | 0
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Calculate Fahrenheit in R: A Step-by-Step Guide77.00 °F
- d Block Electron Configuration: How It Works
- Electron Configuration of a Carbon Atom0.2000 mol/L
- Electron Configuration of Cl (Chlorine)
- Upp Calculator Ato? Meaning & How to Use It15,750 AUD
- Electron Configuration Notes: How to Write Them