molecalculator

Moles & Molar Mass

Percentage by Mass of Carbon in Glucose

Calculator No. 01-9890 · Updated · Formula and assumptions shown below

Mass of carbon in sample 7.207 g
Percentage of carbon by mass
40.0 %
= (6 × 12.011 ÷ Molar mass of glucose) × 100
Mass of glucose sample
18.016 g
Set in the form below
Molar mass of glucose
180.156 g/mol
Set in the form below
You enter
Mass of glucose sample (g), Molar mass of glucose (g/mol)
You get
Mass of carbon in sample (g), Percentage of carbon by mass (%)
Rounding
3 dp · 1 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

Glucose (C6H12O6) is 40.0% carbon by mass. This value comes from dividing the total mass of the six carbon atoms in one molecule by the molecule’s total molar mass, then multiplying by 100.

Formula

The percentage by mass of an element in a compound is:

% element = (mass of element in one mole of compound / molar mass of compound) × 100

For glucose, C6H12O6:

  • Mass of carbon in one mole = 6 × 12.011 g/mol = 72.066 g/mol
  • Molar mass of glucose = 6(12.011) + 12(1.008) + 6(15.999) = 180.156 g/mol
  • % C = (72.066 / 180.156) × 100 = 40.0%

Each variable is used in the calculator above: m is the sample mass in grams, mm is the molar mass of glucose (180.156 g/mol), and the outputs give the mass of carbon in your sample and its percentage.

Worked Example

Using the calculator defaults: a sample of 18.016 g of glucose (which is 0.1000 mol, since 18.016 / 180.156 = 0.1000).

  1. Mass of carbon in one mole of glucose = 6 × 12.011 = 72.066 g/mol.
  2. Mass of carbon in the sample = 0.1000 mol × 72.066 g/mol = 7.2066 g.
  3. Percentage of carbon = (7.2066 g / 18.016 g) × 100 = 40.0%.

The calculator gives 7.207 g of carbon and 40.0% for the same inputs.

Assumptions

  • The glucose is pure and dry (no water of hydration).
  • Atomic weights used are the IUPAC standard values: C = 12.011, H = 1.008, O = 15.999.
  • The formula is the molecular formula C6H12O6, not a hydrated form.

Why 40% Carbon Matters

Knowing the carbon percentage is essential in combustion analysis, where a sample is burned to determine its empirical formula. For glucose, the 40% carbon value is a classic textbook result, but it also appears in real biochemistry: when cells oxidize glucose, the carbon atoms become CO2, and the mass balance of carbon in and out is a core part of metabolic studies. In nutrition, the carbon content of carbohydrates is used to estimate the energy yield, because the oxidation state of carbon determines how much energy is released.

How the Calculation Works

Every element has a standard atomic weight (e.g., carbon = 12.011 g/mol). In a molecule, you sum the atomic weights of all atoms to get the molar mass. Then you divide the mass contributed by the element of interest by the total molar mass. This ratio is dimensionless, so multiplying by 100 gives a percentage that is independent of sample size. For glucose, the ratio is always 72.066 / 180.156 = 0.4000, so any amount of pure glucose contains 40.0% carbon by mass.

Common Mistakes and Misconceptions

  • Using the empirical formula: Glucose’s empirical formula is CH2O, which gives a carbon percentage of 12.011 / (12.011 + 2×1.008 + 15.999) = 40.0% as well—but only because the empirical formula is a simple multiple. For most compounds, using the empirical formula instead of the molecular formula gives a wrong percentage.
  • Forgetting the subscript: A common error is to use 12.011 g/mol for carbon instead of 6 × 12.011. That would give 6.67%, which is wrong.
  • Rounding too early: If you round the molar mass to 180 g/mol and the carbon mass to 72 g/mol, you still get 40%, but for other compounds early rounding can change the last digit. Keep at least three significant figures.
  • Confusing mass percent with mole percent: In one mole of glucose there are 6 moles of carbon atoms out of 24 total moles of atoms, so the mole fraction of carbon is 25%. The mass percentage is different because carbon atoms are heavier than hydrogen and oxygen atoms.

Comparing Glucose to Other Sugars

Glucose, fructose, and galactose all have the same molecular formula C6H12O6, so they all contain 40.0% carbon. Sucrose (table sugar) is C12H22O11; its molar mass is 342.296 g/mol, and the carbon mass is 12 × 12.011 = 144.132 g/mol, giving 42.1% carbon. Starch and cellulose are polymers of glucose, so their carbon percentage is also close to 40%, but the exact value depends on the degree of polymerization and the water content. This difference matters in food labeling and in industrial fermentation, where the carbon source affects yield.

Practical Uses of the Carbon Percentage

  • Combustion analysis: When a glucose sample is burned, the mass of CO2 produced can be converted back to the mass of carbon, and from that you can verify the sample’s purity.
  • Biomass and biofuel calculations: If you know the carbon content of a sugar feedstock, you can estimate the theoretical yield of ethanol or other products, because each carbon atom in glucose ends up in a product molecule.
  • Isotope dilution: In metabolic research, a known mass of 13C-labeled glucose is added to a sample; the carbon percentage helps calculate the amount of label.
  • Environmental chemistry: The carbon content of dissolved organic matter, often measured as glucose equivalents, uses the same mass-percent logic to convert between mass of carbon and mass of compound.

Frequently Asked Questions

Is the percentage of carbon in glucose exactly 40%?

Using the IUPAC standard atomic weight for carbon (12.011), the value is 40.0% when rounded to three significant figures. The exact value depends on the isotopic composition of the carbon sample, but for all practical purposes, 40.0% is the accepted figure.

Why does glucose have 40% carbon but sucrose has 42%?

Because the ratio of carbon atoms to other atoms differs. Glucose has 6 carbons and 6 oxygens, while sucrose has 12 carbons and 11 oxygens. The extra carbon in sucrose is not balanced by an equal increase in oxygen, so the mass fraction of carbon rises.

How do I calculate the percentage of hydrogen in glucose?

Hydrogen mass = 12 × 1.008 = 12.096 g/mol. Divide by 180.156 g/mol and multiply by 100 to get 6.7%. Oxygen is the remainder: 100 − 40.0 − 6.7 = 53.3%.

Does the percentage of carbon change if glucose is in water?

No. The percentage by mass refers to the pure compound. If you dissolve glucose in water, the solution’s carbon percentage depends on the concentration, but the glucose molecule itself always has 40.0% carbon by mass.

Can I use this percentage to find the empirical formula of glucose?

Yes. If you know the percentages of carbon, hydrogen, and oxygen, you can convert them to moles and find the simplest ratio. For glucose, the mole ratio is 1:2:1, giving the empirical formula CH2O. To get the molecular formula, you need the molar mass.

Limits of This Calculation

The percentage is valid for pure, anhydrous glucose. If the sample contains water (e.g., glucose monohydrate, C6H12O6·H2O), the molar mass becomes 198.17 g/mol and the carbon percentage drops to 36.4%. Also, the atomic weights are averages; a sample enriched in 13C would have a slightly higher carbon percentage. For laboratory work, always use the exact atomic weights from your periodic table or the IUPAC source, and follow your lab method and safety data sheet (SDS) when handling glucose.

Related

Formula used
in m | Mass of glucose sample | g | 18.016 | 0
in mm | Molar mass of glucose | g/mol | 180.156 | 0.001
out mc | Mass of carbon in sample | g | m * (6 * 12.011 / mm) | 3
out pc | Percentage of carbon by mass | % | (6 * 12.011 / mm) * 100 | 1

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →