At 25 °C, the pH of a strong base depends on the concentration of hydroxide ions (OH⁻), so there is no single pH for every strong base. For an ideal dilute solution, pH = 14.00 + log₁₀[OH⁻]; enter the base concentration and the number of hydroxide ions each formula unit releases to calculate pH.
Formula
For a strong base that dissociates completely, hydroxide concentration is [OH⁻] = n × c. Here, c is the analytical base concentration in mol/L, and n is the number of hydroxide ions released per formula unit (a dimensionless whole number). At 25 °C, pOH = −log₁₀([OH⁻]/(1 mol/L)) and pH = 14.00 − pOH, giving pH = 14.00 + log₁₀([OH⁻]/(1 mol/L)). The calculator treats the numerical concentration in mol/L as the value inside the logarithm, as is customary for dilute-solution calculations.
The value 14.00 is the approximate pKw of water at 25 °C: pKw = pH + pOH. The calculator assumes complete dissociation and uses concentration in place of hydroxide activity. It therefore estimates pH rather than predicting an exact meter reading in every solution.
Worked Example
Using the default values, c = 0.01 mol/L and n = 1:
- [OH⁻] = n × c = 1 × 0.01 = 0.01000 mol/L.
- pOH = −log₁₀(0.01000) = 2.0000.
- pH = 14.00 − 2.0000 = 12.00.
The calculator displays pH = 12.00 and hydroxide concentration = 0.0100 mol/L.
Assumptions
- Temperature is 25 °C, where pKw is approximately 14.00.
- The base is strong and dissociates completely in water.
- The solution is dilute enough that concentration is a useful approximation for hydroxide activity.
- For a base with multiple hydroxide ions per formula unit, each contributes to n; other reactions that consume or produce OH⁻ are not included.
What Makes a Base Strong?
A strong base produces hydroxide ions essentially completely when it dissolves in water. Common examples include sodium hydroxide (NaOH) and potassium hydroxide (KOH), which release one OH⁻ per formula unit, and calcium hydroxide, Ca(OH)₂, which can release two. “Strong” describes the extent of ionization or dissociation, not how concentrated or dangerous a solution is. A very dilute strong base may have a pH only slightly above 7, while a concentrated one can have a much higher pH.
This differs from a weak base, which reacts only partly with water. For a weak base such as ammonia, the hydroxide concentration cannot generally be found by simply multiplying its concentration by the number of hydroxide groups in its formula. Its base-ionization constant and equilibrium calculations matter. Do not use this calculator for weak bases.
Reading the Result and Choosing n
Use the concentration of the dissolved base in the final solution, not the amount of solid or the concentration of a stock solution before dilution. Enter c in mol/L. For common hydroxide bases, n is usually clear from the formula: NaOH and KOH have n = 1; Ca(OH)₂ and Ba(OH)₂ have n = 2. The input is limited to whole-number choices from 1 to 4 because the formula assumes a count of hydroxide ions per formula unit.
For example, an ideal 0.001 mol/L NaOH solution gives [OH⁻] = 0.001 mol/L and pH = 11.00 at 25 °C. An ideal 0.001 mol/L Ca(OH)₂ solution gives [OH⁻] = 2 × 0.001 = 0.002 mol/L and pH ≈ 11.30, provided the stated concentration represents dissolved Ca(OH)₂ and complete dissolution is a reasonable assumption. Solubility can limit the concentration of some bases, so the formula does not establish whether a proposed solution can actually be prepared.
Limits, Temperature, and Common Mistakes
The familiar shortcut pH + pOH = 14 is not universal at every temperature. It is based on water’s ion-product constant near 25 °C; that constant changes with temperature. Because this calculator fixes pKw at 14.00, its results should not be treated as exact at other temperatures.
Another limitation is using concentration instead of activity. pH is defined in terms of hydrogen-ion activity, and ion interactions become more important as solutions become concentrated. In addition, atmospheric carbon dioxide can react with alkaline solutions, reducing their hydroxide content over time. For a real sample, the meter reading is the real check: temperature and ionic strength shift pH.
- Do not enter a percentage, grams per litre, or molarity in another unit as though it were mol/L. Convert it first.
- Do not set n to the number of oxygen atoms; it is the number of hydroxide ions released per formula unit.
- Do not assume pH must be between 0 and 14. Values outside that range can occur in concentrated solutions, although simple concentration-based estimates become less reliable there.
- Do not infer that “strong” means concentrated. Strength and concentration are different properties.
If you are planning bench work, follow your lab method, the safety data sheet (SDS) and your supervisor. Strong bases can cause severe chemical burns; use appropriate protective equipment and established handling and spill procedures.
Frequently Asked Questions
What is the pH of a strong base?
There is no one fixed value. At 25 °C, an ideal dilute strong-base solution has pH = 14.00 + log₁₀[OH⁻], with hydroxide concentration expressed in mol/L.
Is the pH of every strong base above 7?
In ordinary aqueous solutions, a base that supplies excess hydroxide has a pH above 7 at 25 °C. How far above 7 depends mainly on its concentration and, for some bases, how many hydroxide ions each formula unit supplies.
What is the pH of 0.1 M sodium hydroxide?
Assuming complete dissociation and ideal dilute-solution behavior, [OH⁻] = 0.1 mol/L, pOH = 1, and pH = 13.00 at 25 °C. At higher concentrations, activity effects make this simple estimate less exact.
Why can a strong base have a pH near 7?
A strong base can be extremely dilute. Complete dissociation describes what happens to the base that is present; it does not mean there must be a large amount of hydroxide in the solution.
Does pH + pOH always equal 14?
No. Their sum is pKw, which is approximately 14.00 at 25 °C and varies with temperature. The calculator uses the 25 °C approximation.
Can this calculator find the exact measured pH?
No. It gives an ideal estimate from concentration and complete dissociation. Temperature, ionic strength, dissolved carbon dioxide, solubility, and other reactions can change the measured value; a suitable meter reading is the practical check.
Related
Formula used
in c | Base concentration | mol/L | 0.01 | 0 in n | Hydroxide ions released per formula unit | - | 1 | 1 out pH | pH | - | 14 + log10(n * c) | 2 out oh | Hydroxide concentration | mol/L | n * c | 4
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Calculator in Hindi: Meaning, Usage and Examples0.2000 mol/L
- Volume Strength Formula in Terms of Molarity11.20 volumes
- H2O2 Volume Strength to Molarity Calculator0.893 mol/L
- Volume Strength to Molarity: Formula and Calculator0.0409 mol/L
- Molar Volume: Definition, Formula, and Calculator22.414 L/mol
- Molar Volume of a Gas Calculator and Formula22.4140 L/mol