molecalculator

Moles & Molar Mass

pH of Sodium Hydroxide: Calculate It from Concentration

Calculator No. 01-1181 · Updated · Formula and assumptions shown below

pH 12.00
pOH
2.00
Result, rounded to 2 decimal places
Hydroxide concentration
0.0100 mol/L
= NaOH concentration
NaOH concentration
0.01 mol/L
Set in the form below
You enter
NaOH concentration (mol/L)
You get
pH, pOH, Hydroxide concentration (mol/L)
Rounding
2 dp · 4 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The pH of sodium hydroxide (NaOH) depends on its concentration and temperature; there is no single pH for every solution. This calculator estimates pH from the NaOH concentration you enter, assuming complete dissociation in dilute water at 25 °C, and also reports hydroxide concentration and pOH.

Formula

Sodium hydroxide dissociates in water as NaOH → Na⁺ + OH⁻. Under the complete-dissociation assumption, hydroxide concentration [OH⁻] equals the formal NaOH concentration c. At 25 °C, pOH = −log₁₀([OH⁻]) and pH + pOH = 14.00. Combining these gives pH = 14.00 + log₁₀(c), with c in mol/L. The calculator also shows pOH = −log₁₀(c) and [OH⁻] = c. The value 14.00 is the approximate pKw of water at 25 °C; it is not constant at all temperatures.

Here, pH and pOH are dimensionless logarithmic quantities, c is the analytical concentration of NaOH in mol/L, and [OH⁻] is hydroxide concentration in mol/L. The input is restricted to c ≥ 0, but the logarithm is undefined at exactly zero. Enter a positive concentration to obtain a result; zero is included as the mathematical lower limit and cannot produce a finite pH.

Worked Example

For the default concentration c = 0.01 mol/L:

  • [OH⁻] = c = 0.01 mol/L.
  • pOH = −log₁₀(0.01) = 2.00.
  • pH = 14.00 − 2.00 = 12.00.

The calculator therefore gives pH 12.00, pOH 2.00, and hydroxide concentration 0.0100 mol/L. These values apply to the stated idealized model, not necessarily to a real sample measurement.

Assumptions

  • Temperature is 25 °C, so pKw is taken as 14.00.
  • NaOH is treated as a strong base that dissociates completely.
  • The solution is dilute enough that concentration can stand in for hydroxide activity.
  • The input is the final solution concentration, not the amount of NaOH added or the volume of water alone.
  • The solution contains no other acids, bases, or salts that materially affect its chemistry.

Why Sodium Hydroxide Raises pH

pH describes acidity on a logarithmic scale, while pOH describes hydroxide ion abundance. Dissolved NaOH separates into sodium ions and hydroxide ions. The sodium ion is a spectator for this simple calculation; hydroxide is the species that makes the solution basic by reducing the relative abundance of hydrogen ions.

Because the scale is logarithmic, a one-unit pH change corresponds to a tenfold change in hydrogen-ion activity. In the ideal 25 °C model, a 0.001 mol/L NaOH solution has pOH 3 and pH 11, while a 0.1 mol/L solution has pOH 1 and pH 13. Increasing NaOH concentration tenfold raises calculated pH by one unit, not by ten units.

The familiar pH range of 0 to 14 is a useful introductory picture, not an absolute boundary for every solution. Concentrated bases can have pH values above 14, and concentrated acids can fall below 0. At high concentrations, simple concentration-based calculations become less reliable because ion interactions matter.

Using Concentration Correctly

Use the concentration of the finished solution in mol/L (also called molarity). For example, 0.010 mol/L is not the same as 0.010 mol of NaOH in an unspecified volume. If you know mass and final volume, first obtain molarity using the NaOH molar mass, 39.997 g/mol, and volume in liters: c = mass / (39.997 × volume). The final solution volume is required; it is not generally equal to the volume of water initially used.

Common input mistakes include confusing millimolar with molar units and entering a percentage as though it were mol/L. Convert before using the calculator: 1 mM = 0.001 mol/L. A mass percentage needs additional information, especially solution density, to convert reliably to molarity. Do not infer concentration from pH alone unless the temperature and relevant solution chemistry are known.

Limits and Measurement

The calculator is a theoretical estimate. Real pH is related to hydrogen-ion activity rather than concentration alone. Activity effects become increasingly important in concentrated solutions, and dissolved carbon dioxide can react with hydroxide and alter a sample. Other dissolved substances may also affect the result. The pH of water itself changes with temperature because water’s ionization constant changes.

A pH meter reading is the real check for an actual sample. Temperature and ionic strength shift pH, so measure with a properly calibrated meter and account for sample temperature when interpreting the result. Indicator paper can be useful for a rough range but is less precise than a meter. For laboratory work, follow your lab method, the safety data sheet (SDS) and your supervisor.

Safety When Handling NaOH

Sodium hydroxide is caustic and can cause serious skin and eye burns. A solution’s calculated pH does not by itself describe how safely it can be handled: concentration, quantity, contact time, and splashing risks matter. Consult the product’s safety data sheet and use the protective equipment and controls specified for the work. Never taste a solution or handle it as though a low concentration makes it harmless. If exposure occurs, follow the SDS and local emergency procedures promptly.

Frequently Asked Questions

What is the pH of 1 M sodium hydroxide?
Under the ideal 25 °C calculation, pOH = 0 and pH = 14.00. At 1 M, non-ideal behavior can be significant, so an actual measured pH may differ from this simple estimate.

Is sodium hydroxide acidic or basic?
It is a strong base. In water it dissociates to produce hydroxide ions, which raise pH.

Can sodium hydroxide have a pH above 14?
Yes. The 0–14 range is not a strict limit, particularly for concentrated solutions. The simple equation in this page is most dependable for dilute solutions.

Does NaOH concentration equal hydroxide concentration?
For a dilute solution of pure NaOH that dissociates completely, yes: [OH⁻] is approximately the formal NaOH concentration. Other reactions and non-ideal conditions can change the relationship.

Why does measured pH differ from the calculated value?
Possible reasons include temperature, concentrated-solution activity effects, contamination or absorbed carbon dioxide, other dissolved chemicals, and measurement calibration or technique.

Related

Formula used
in c | NaOH concentration | mol/L | 0.01 | 0
out ph | pH | - | 14 + log10(c) | 2
out poh | pOH | - | -log10(c) | 2
out oh | Hydroxide concentration | mol/L | c | 4

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →