For a strong base, calculate pH from the hydroxide concentration after accounting for how many hydroxide ions each formula unit produces: pH = 14.00 + log₁₀[OH⁻] at 25 °C. Enter the base concentration and hydroxide-ion yield to get the estimated pH; this calculation assumes complete dissociation in a dilute solution.
Formula
For a strong base that dissociates completely and releases n hydroxide ions per formula unit, the hydroxide concentration is [OH⁻] = n × c. Then pOH = −log₁₀([OH⁻]), and at 25 °C, pH + pOH = 14.00. Combining these gives pH = 14.00 + log₁₀(n × c).
- c is the initial analytical concentration of the base in mol/L.
- n is the number of hydroxide ions released per formula unit, treated here as a numeric input.
- [OH⁻] is hydroxide concentration in mol/L.
- pH and pOH are dimensionless logarithmic quantities.
The calculator uses the conventional 25 °C relationship pH + pOH = 14.00. This is an approximation for dilute aqueous solutions; at other temperatures, water’s ionization constant changes and the sum is not exactly 14.00.
Worked Example
Using the defaults, the base concentration is c = 0.01 mol/L and the hydroxide yield is n = 1.
- Calculate hydroxide concentration: [OH⁻] = 1 × 0.01 = 0.01 mol/L.
- Calculate pOH: pOH = −log₁₀(0.01) = 2.00.
- Calculate pH at 25 °C: pH = 14.00 − 2.00 = 12.00.
The calculator reports pH = 12.00 and pOH = 2.00.
Assumptions
- The base is a strong base and dissociates completely in water.
- The solution is dilute enough for concentration-based approximations to be useful.
- The temperature is 25 °C, where the conventional pH + pOH value is 14.00.
- The concentration entered is the final solution concentration, not the amount added or the solvent volume alone.
How the Equation Works
pH is defined as the negative base-10 logarithm of hydrogen-ion activity. In dilute solutions, activity is often approximated by concentration, so pH ≈ −log₁₀[H⁺]. Similarly, pOH ≈ −log₁₀[OH⁻]. Water’s equilibrium links the two: at 25 °C, its ion product is approximately 1.0 × 10⁻¹⁴, giving pH + pOH ≈ 14.00.
A strong base is one that ionizes essentially completely in water, not necessarily one that is highly concentrated. For example, sodium hydroxide supplies one OH⁻ ion per formula unit, so a 0.010 mol/L solution has an estimated hydroxide concentration of 0.010 mol/L. Calcium hydroxide can supply two OH⁻ ions per formula unit; under the complete-dissociation assumption, its hydroxide concentration is twice its formula-unit concentration. Its limited solubility can restrict which concentrations are physically attainable.
Because the pH scale is logarithmic, a tenfold change in hydroxide concentration changes pOH by one unit and pH in the opposite direction by one unit. A calculated pH is therefore not a percentage and should not be interpreted as a linear measure of “how basic” a solution is.
When to Use It and How to Choose Inputs
Use this equation for a straightforward estimate when the base is known to be strong, its dissolved concentration is known, and its hydroxide yield is clear. Select n from the dissociation stoichiometry: sodium hydroxide has n = 1, while barium hydroxide has n = 2 when it is dissolved and treated as fully dissociated. The number is a chemical coefficient, not a pH value.
- Use mol/L for concentration. Convert millimolar to mol/L by dividing by 1000; for example, 5.0 mM is 0.0050 mol/L.
- Use the concentration in the final solution. If a solution was diluted, calculate its final concentration before using this equation.
- Check whether the base is soluble enough to produce the concentration assumed. A formula cannot override a solubility limit.
- For a mixture containing other acids or bases, account for all relevant reactions and amounts rather than applying this single-base expression to one ingredient.
If hydroxide concentration is given directly, skip the factor n and use pH = 14.00 + log₁₀[OH⁻]. Do not multiply by the number of hydroxide ions a second time.
Limits, Comparisons, and Common Mistakes
The simple equation is not a universal pH solver. It assumes complete dissociation and approximates activity with concentration. At appreciable ionic strength, ion activities can differ materially from concentrations. In concentrated solutions, the result may be a poor estimate, and a pH electrode’s response and calibration conditions also matter. The meter reading is the real check; temperature and ionic strength shift pH.
Weak bases do not release all their hydroxide contribution through complete dissociation. Their equilibrium depends on the base’s strength and concentration, so use a base-equilibrium calculation rather than the strong-base formula. Likewise, a buffer or a solution containing both acid and base may require a reaction or buffer calculation.
- Confusing pOH with pH: for a basic solution at 25 °C, pOH is generally low while pH is high; add pH and pOH to obtain about 14.00.
- Using a concentration in the wrong units: entering 10 instead of 0.010 for 10 mM changes the calculated result by three pH units.
- Forgetting stoichiometry: a base with two hydroxide ions per formula unit contributes twice the formula-unit concentration under the idealized assumptions.
- Assuming every strong base can reach any concentration: solubility and the actual preparation determine whether the input describes a realizable solution.
Calculated values should not imply more precision than the input data justify. The displayed two decimal places are convenient for comparison, but they do not guarantee that a real sample’s pH is known to that precision. For bench work, follow your lab method, the safety data sheet (SDS) and your supervisor.
Frequently Asked Questions
What is the equation for the pH of a strong base?
At 25 °C, pH = 14.00 + log₁₀[OH⁻]. If the base concentration is c and each formula unit releases n hydroxide ions, estimate [OH⁻] as nc and use pH = 14.00 + log₁₀(nc).
What is the pH of 0.01 M sodium hydroxide?
Assuming complete dissociation at 25 °C, [OH⁻] = 0.01 M, pOH = 2.00, and pH = 12.00.
Why do you subtract pOH from 14?
At 25 °C, pH + pOH is approximately 14.00. Rearranging gives pH = 14.00 − pOH.
Does a strong base always have a high pH?
“Strong” describes how completely a base ionizes, not its concentration. A very dilute strong base may have a pH only slightly above neutral, and the simple estimate becomes less reliable near neutral conditions where water’s own ions matter.
Is pH 14 the maximum possible pH?
No. The familiar 0-to-14 range is a useful convention for many dilute aqueous solutions at 25 °C, not a strict universal limit. Concentrated solutions and conditions other than 25 °C require more careful treatment.
Does this formula work for weak bases?
No. A weak base only partially reacts with water, so its hydroxide concentration depends on equilibrium. Use its base dissociation constant and an appropriate equilibrium calculation instead.
Related
Formula used
in c | Strong base concentration | mol/L | 0.01 | 0 in n | OH⁻ ions per formula unit | - | 1 | 0 out ph | pH | - | 14 + log10(c * n) | 2 out poh | pOH | - | -log10(c * n) | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Liters to Cubic Meters: Conversion and Examples0.001000 m³
- Normal Cubic Meter to Liters Calculator1,000.00 L
- Qt to Liters Conversion: US and Imperial Quarts0.946353 L
- Meters to Liters Formula: Convert Length to Volume?1,000.000 L
- Meters to Litres: Why Length Alone Is Not Enough1,000.00 L
- Cubic Meters per Hour to Liters per Second0.2778 L/s