The relative formula mass of anhydrous magnesium sulfate, MgSO4, is 120.36; its corresponding molar mass is 120.36 g/mol. Enter the number of magnesium sulfate formula units and the atomic weights used to calculate the result to obtain the total relative mass.
Formula
For one formula unit of magnesium sulfate, add the relative atomic mass of one magnesium atom, one sulfur atom, and four oxygen atoms:
Mr(MgSO4) = Ar(Mg) + Ar(S) + 4 × Ar(O)
- Mr is the relative formula mass, a ratio with no unit.
- Ar(Mg), Ar(S), and Ar(O) are the relative atomic masses of magnesium, sulfur, and oxygen. The calculator uses 24.305, 32.06, and 15.999, respectively.
- The coefficient 4 comes from the four oxygen atoms in SO4.
The numerical value of the molar mass in grams per mole has the same digits as Mr: M = Mr g/mol. Thus 120.36 as a relative formula mass corresponds to 120.36 g/mol. The final output multiplies Mr by the entered number of formula units to give their combined mass in atomic mass units, u.
Worked Example
With the default inputs, n = 1, Ar(Mg) = 24.305, Ar(S) = 32.06, and Ar(O) = 15.999:
Mr = 24.305 + 32.06 + 4 × 15.999
4 × 15.999 = 63.996
Mr = 24.305 + 32.06 + 63.996 = 120.361, or 120.36 to two decimal places.
The molar mass is therefore 120.36 g/mol. For one formula unit, the calculator’s mass output is n × Mr = 1 × 120.361 = 120.361 u, displayed as 120.36 u.
Assumptions
- The formula is anhydrous MgSO4, with exactly one magnesium, one sulfur, and four oxygen atoms per formula unit.
- The atomic-weight inputs are the conventional values shown in the calculator; displayed results are rounded to two decimal places.
- The calculation is a formula-mass calculation, not a measurement of a particular sample’s purity or water content.
What Relative Formula Mass Means
Relative atomic mass compares the average mass of atoms of an element with one-twelfth of the mass of a carbon-12 atom. Relative formula mass applies the same comparison to all atoms represented by a chemical formula. Because magnesium sulfate is an ionic solid rather than a collection of discrete molecules, “relative formula mass” is the more precise term; “molecular mass” is sometimes used casually but is less exact here.
A relative mass is dimensionless: it has no unit. Molar mass, by contrast, is the mass of one mole of entities and is expressed in g/mol. The shared numerical value is convenient, but the quantities are not identical. A mole is a specified number of entities, so 120.36 g/mol means that one mole of MgSO4 formula units has a mass of about 120.36 g.
Why Magnesium Sulfate Can Have Different Values
The formula matters. Anhydrous magnesium sulfate contains no water in its formula, so its relative formula mass is 120.36 using the stated atomic weights. Some magnesium sulfate crystals are hydrates: water molecules are part of the solid’s chemical formula. The commonly encountered heptahydrate is MgSO4·7H2O. It has seven additional water molecules per formula unit, so its formula mass is higher.
Using the same atomic weights, one water molecule has a formula mass of 2(1.008) + 15.999 = 18.015. The heptahydrate is therefore approximately 120.361 + 7(18.015) = 246.466, or 246.47 g/mol. Do not use 120.36 g/mol for a hydrate when converting its measured mass into moles. Check the label or chemical formula to see whether water of crystallization is included.
Atomic weights can also differ slightly between reference tables because naturally occurring elements contain isotopes in varying proportions, and published values may use different rounding conventions. For ordinary classroom calculations, the displayed conventional values are suitable. Use the values specified by a course, laboratory method, or reference when a particular precision is required.
Using the Result in Chemistry Calculations
Molar mass links a measured mass to an amount of substance. For anhydrous magnesium sulfate, divide mass in grams by 120.36 g/mol to find moles. For example, 12.036 g corresponds to 12.036 ÷ 120.36 = 0.1000 mol, subject to the precision of the mass and molar-mass values. To find the mass from an amount in moles, multiply moles by 120.36 g/mol.
This value is useful in stoichiometry, formula-based mass calculations, and educational solution calculations. It does not by itself give a solution concentration: that also requires the amount dissolved and the solution’s final volume, along with clarity about whether the substance is anhydrous or hydrated.
- For a mass-to-moles conversion, use moles = mass (g) ÷ molar mass (g/mol).
- For a moles-to-mass conversion, use mass (g) = moles × molar mass (g/mol).
- For a hydrate, calculate with the entire hydrate formula, including its water molecules.
Common Errors and Limits
A frequent mistake is to count the atoms incorrectly. In MgSO4, the subscript 4 applies only to oxygen, not to magnesium or sulfur. Another is to treat the relative formula mass as though it were itself a mass in grams. The number 120.36 has no unit when it is Mr; the molar mass is 120.36 g/mol.
Rounding should match the purpose of the calculation. Keeping extra digits during intermediate steps reduces rounding error; round the final answer to a sensible number of significant figures based on the input data. The calculator reports two decimal places for convenient comparison, not because every sample’s molar mass is known exactly to that precision.
This calculation assumes the chemical formula is correct and does not account for impurities, moisture absorbed by a sample, or uncertainty in a weighing. It also does not identify an unknown solid. Those questions require suitable analytical information beyond the formula-mass arithmetic.
Frequently Asked Questions
What is the relative atomic mass of magnesium sulfate?
Strictly speaking, a compound does not have a relative atomic mass; it has a relative formula mass. For anhydrous MgSO4, that value is 120.36 with the atomic weights used here.
What is the molar mass of MgSO4?
The molar mass of anhydrous magnesium sulfate is 120.36 g/mol using Mg = 24.305, S = 32.06, and O = 15.999.
Is magnesium sulfate the same as Epsom salt?
Epsom salt commonly refers to magnesium sulfate heptahydrate, MgSO4·7H2O, rather than anhydrous MgSO4. Its formula mass is about 246.47 g/mol, so the two forms must not be interchanged in mass calculations.
Why do some sources give a slightly different answer?
Sources may use different rounded atomic weights or may refer to a hydrate instead of anhydrous MgSO4. Check both the atomic-weight convention and the exact formula before comparing values.
Does relative formula mass have units?
No. Relative formula mass is a ratio and has no unit. Molar mass has units, commonly g/mol, and has the same numerical value when expressed in those units.
Related
Formula used
in n | Formula units | - | 1 | 0 in mg | Magnesium atomic weight | - | 24.305 | 0 in s | Sulfur atomic weight | - | 32.06 | 0 in o | Oxygen atomic weight | - | 15.999 | 0 out m | Relative formula mass of MgSO4 | - | mg + s + 4 * o | 2 out mm | Molar mass of MgSO4 | g/mol | m | 2 out f | Mass of specified formula units | u | n * m | 2
Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work
Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.
More in this section
- Serial Dilution Calculation Examples0.2000 mol/L
- Serial Dilution: How It Works & Why It Matters1.000 × 10−5 mol/L
- Serial Dilution A Level Biology: How To Do It30
- Serial vs Simple Dilution: Key Differences0.2000 mol/L
- Milton Tablet Dilution: Mixing Guide0.2000 mol/L
- qPCR Serial Dilution Standard Curve: How to Build One100,000 copies/µL