molecalculator

Moles & Molar Mass

Relative Formula Mass of Nitric Acid HNO3: 63.012

Calculator No. 01-3645 · Updated · Formula and assumptions shown below

Relative formula mass of HNO3 63.012
Molar mass of HNO3
63.012 g/mol
= Relative formula mass of HNO3
Hydrogen atoms
1
Set in the form below
Hydrogen atomic weight
1.008
Set in the form below
You enter
Hydrogen atoms, Hydrogen atomic weight, Nitrogen atoms, Nitrogen atomic weight, Oxygen atoms, Oxygen atomic weight
You get
Relative formula mass of HNO3, Molar mass of HNO3 (g/mol)
Rounding
3 dp

For study and lab planning. The result follows from the numbers you enter and the formula shown. Check it against your method before you weigh, mix or dilute anything, follow the safety data sheet and your supervisor, and do not use it for clinical, dosing or medication work.

The relative formula mass (Mr) of nitric acid, HNO3, is 63.012 using standard atomic weights H = 1.008, N = 14.007, and O = 15.999. Enter the atom counts and atomic weights to calculate Mr; the calculator returns a dimensionless value, not a mass in grams.

Formula

Relative formula mass is the sum of the relative atomic masses of all atoms represented in a chemical formula:

Mr = nHAr(H) + nNAr(N) + nOAr(O)

  • nH, nN, nO are the numbers of hydrogen, nitrogen, and oxygen atoms per formula unit; they are counts and have no units.
  • Ar(H), Ar(N), Ar(O) are the relative atomic masses used for those elements; relative atomic masses have no units.
  • Mr is the relative formula mass, also dimensionless.

For HNO3, the formula contains one hydrogen atom, one nitrogen atom, and three oxygen atoms. The calculator also reports the corresponding molar mass in g/mol. Its numerical value is the same as Mr when the molar mass is expressed in g/mol, but the two quantities have different meanings and units.

Worked Example

Using exactly the calculator’s default values:

  1. Hydrogen contribution: 1 × 1.008 = 1.008.
  2. Nitrogen contribution: 1 × 14.007 = 14.007.
  3. Oxygen contribution: 3 × 15.999 = 47.997.
  4. Add the contributions: 1.008 + 14.007 + 47.997 = 63.012.

Therefore, Mr(HNO3) = 63.012, and the corresponding molar mass is 63.012 g/mol. The result is conventionally often shown as 63.01 when rounded to two decimal places.

Assumptions

  • The formula is HNO3, with one H, one N, and three O atoms per molecule.
  • The atomic weights are the stated abridged standard values: H 1.008, N 14.007, and O 15.999.
  • The molar-mass result uses the conventional correspondence between dimensionless relative mass and g/mol.

What Relative Formula Mass Means

Relative formula mass compares the mass of a formula unit with one-twelfth of the mass of a carbon-12 atom. It is calculated by adding relative atomic masses according to the subscripts in the formula. Nitric acid exists as molecules, so “relative molecular mass” is also commonly used for HNO3; “relative formula mass” remains a broadly applicable term for substances whose formulas describe ionic units rather than separate molecules.

The number 63.012 is not a sample’s weight. A particular amount of nitric acid could have a mass of a fraction of a gram, several grams, or another value depending on how much material is present. The relative formula mass describes the formula composition; molar mass connects that composition to an amount of substance. One mole of HNO3 has a mass of about 63.012 g under this atomic-weight convention.

Why the Subscripts Matter

In a chemical formula, a subscript applies to the element immediately before it. HNO3 therefore means one H, one N, and three O atoms. The absence of a subscript after H or N means one atom, not zero. The oxygen contribution is three times the oxygen atomic weight; it is not just 15.999.

Parentheses and coefficients require separate care. For example, a subscript outside parentheses multiplies every atom inside them. A coefficient written before a formula counts multiple formula units in a reaction equation, but it does not change the relative formula mass of one HNO3 molecule. Two HNO3 units have twice the total mass of one unit, while the formula’s Mr remains 63.012.

Using Mr and Molar Mass

For general chemistry calculations, molar mass is used to convert between grams and moles. With the value here, the relationship is:

amount in moles = mass in grams ÷ 63.012 g/mol

Conversely, mass in grams equals the amount in moles multiplied by 63.012 g/mol. These relationships are useful in stoichiometry, where a balanced equation gives mole ratios and molar mass translates a measured mass into moles. The calculator only finds formula mass; it does not determine reaction yields, solution concentration, or the amount of nitric acid in a mixture. Those questions require additional information.

For a compound that contains ions, calculate the mass from the complete formula unit, including all atoms and their subscripts. For a hydrate, include the water molecules indicated in the formula. For example, a dot followed by a coefficient and H2O means those water molecules contribute to the formula mass as well.

Atomic Weights, Rounding, and Common Errors

Atomic weights are standard values used for chemical calculations. The values in this calculation are consistent with commonly used abridged standard atomic weights. Isotopic composition can affect the exact atomic weight of a sample, so the displayed result is a conventional calculation rather than a claim that every physical sample has an absolutely identical isotopic composition.

  • Use the number of atoms in the formula, not just the number of element symbols.
  • Multiply oxygen’s atomic weight by three for HNO3.
  • Do not attach a unit to Mr; add g/mol only when reporting molar mass.
  • Keep enough digits during intermediate arithmetic, then round the final result to match the precision required by the calculation.
  • Do not confuse nitric acid, HNO3, with nitrate, NO3−; nitrate has no hydrogen atom and therefore a different formula mass.

If a textbook uses slightly different atomic weights or rounds them earlier, its final value may differ in the last decimal place. That is usually a difference in the chosen atomic-weight convention or rounding, not a different formula.

Frequently Asked Questions

What is the relative formula mass of HNO3?
The relative formula mass is 63.012 using H = 1.008, N = 14.007, and O = 15.999.

What is the molar mass of nitric acid?
Using the same atomic weights, its molar mass is 63.012 g/mol, often rounded to 63.01 g/mol.

Why does nitric acid have three oxygen atoms in the calculation?
The subscript 3 in HNO3 applies to oxygen, so its atomic weight is counted three times.

Does relative formula mass have units?
No. Mr is a ratio and has no units. Molar mass is a related quantity expressed in g/mol.

Is the mass of nitrate the same as the mass of nitric acid?
No. Nitric acid is HNO3; nitrate is NO3−. The nitrate ion has no hydrogen atom, so its formula mass is different.

Related

Formula used
in nh | Hydrogen atoms | - | 1 | 0 | 100
in h | Hydrogen atomic weight | - | 1.008 | 0 | 300
in nn | Nitrogen atoms | - | 1 | 0 | 100
in n | Nitrogen atomic weight | - | 14.007 | 0 | 300
in no | Oxygen atoms | - | 3 | 0 | 100
in o | Oxygen atomic weight | - | 15.999 | 0 | 300
out mr | Relative formula mass of HNO3 | - | nh * h + nn * n + no * o | 3
out mm | Molar mass of HNO3 | g/mol | mr | 3

Each line is one input (in, sel, list) or one result (out: label, unit, formula, decimals). How the calculators work

Method: the standard formula for this calculation with the constants and conversion factors written on the page, rounded as each result states. See method and constants, the disclaimer or report an error.

More in this section

The whole Moles & Molar Mass section →